|
| 1 | Annexure-A (LABOUR CHARGES) |
| 2 | Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual. |
| 3 | Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 4 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line. |
| 5 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement :4 graded stone 20mm nominal size: 8 coarse sand) block including cost of Cement, sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 6 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 7 | Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual. |
| 8 | Grouting of pole in size 0.45x4.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone 20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual. |
| 9 | Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc. |
| 10 | Dismantling of existing LT line. (1 Phase 2 Wire) including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel). |
| 11 | Dismantling of existing LT line. (2 Phase 3 Wire) including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel). |
| 12 | Dismantling of existing LT line. (3 Phase 4 Wire) including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel). |
| 13 | Disconnection and Reconnection of Consumer Connection. |
| 14 | Laying Sagging of LT XLPE AB CABLE 3x120+ 1x95+1x16 Sq.mm |
| 15 | Straightning of Tilted STP Poles. |
| 16 | Supply and Fixing of LT Clamp for PCC Pole with N&B |
| 17 | Erection of Dead End Clamp. |
| 18 | Erection of Suspension Clamp. |
| 19 | Providing and fixing three phase distribution box with clamp. |
| 20 | Fixing of Piercing Connector 120-35 sqmm. |
| 21 | Fixing of PG Clamp 95-95 sqmm. |
| 22 | Annexure-B (SUPPLY ITEMS) |
| 23 | Supply of PCC Pole 8.5 Mtr long. |
| 24 | Supply of Earthing Rod MS 20x2500mm. |
| 25 | Supply of GI wire 5mm/6 SWG. |
| 26 | Supply of Stay set GI 16x1800 mm. |
| 27 | Supply of stay wire GI 7/3.15mm 7/10 SWG. |
| 28 | Supply of Suspension clamp with Eye Hook. |
| 29 | Supply of Dead End Clamp with I Hook |
| 30 | Supply of Stay Insulator |
| 31 | Supply of MS Clamp with N&B for Suspension Clamp |
| 32 | Supply of MS Clamp with N&B for PCC Dead End Clamp |
| 33 | Supply of Stay Clamp with N&B |
| 34 | Supply of PG Clamp |
| 35 | Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120-70/35-35 sqmm to 25 Sqmm |
| 36 | Supply of LT AB cable 3x120+1x95+1x16 sqmm-D |
| 37 | Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm.for connection of L.T. consumer (Sintex make or other ISI mark reputed company ) with Panel Lock with key) (As per drawing attached) |
| 38 | Supply of MS Half Clamp for LT Distribution Box. |
