|
| 1 | BUSH BEARING (VERTICAL SHAFT BUSH),EERM # BHEL # FOR ESP:FAA-6X45-2X108135-2Additional Data:Bush Bearing Along with Housing for Vertical Shaft Bush of Rapping Mechanism for Emitting , (Bush Size: ID- 40.5, OD- 70, L- 55 mm) )MOC : Bush C.I. and body made by M.S., |
| 2 | BUSH,MATERIAL:CAST IRON FOR ESPSIZE: 70 MM(OD) X 41MM(ID) X 55 MM(WIDTH)Additional Data:Bush Bearing (CI Material), Size: 70 mm(OD) X 41mm(ID) X 55 mm(Width) For ESP Internal.MOC : Bush C.I |
| 3 | SET RING FOR COLLECTING RAPPING FOR ESP FOR ESP FAA-6X45-2X108135-2Additional Data:Set Ring for Collecting Rapping Shaft For ESP,MOC: IS 2062, |
| 4 | INNER ARM ASSY FOR ESP #Additional Data:INNER ARM ASSY FOR ESP # (INNER ARM ASSY FORESP # MATERIAL OF CONSTRUCTION : IS 2062 FASTNER GRADE: 10.9 ). |
| 5 | OUTER ARM FOR COLLECTING RAPPING BIG $FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Hammer, Outer Arm For Collecting, Rapping (Big) For ESP Outer Arm-2, Material Of Construction: Round: EN 8, Arm: IS 2062 Pin: IS 2062 ) |
| 6 | SHOCK PAD FOR CERM FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Shock Pad (ESP Internal), 2nos hole of dia 17.5 mm. Dimension:155mm x 80mm width x 29mm thickMATERIAL COMPOSITION : GR 280-520W, IS :1030. |
| 7 | GRIP COUPLING FOR DRIVE ARNGMNT EERM FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Coupling for EERM (ESP) Grip Coupling,MOC: IS 2062,EN 8. |
| 8 | COUPLING-I OF COLLECTING ELECTRODE RAPNGAdditional Data:Coupling- I of Collecting Electrode Rapping,MOC: EN 8 |
| 9 | CLUTCH OF DRIVE ARRGT FOR CERM FOR ESPFAA-6X45-2X108135-2 BHELAdditional Data:Clutch for Drive Arrangement of CollectingElectrode Rapping, MOC:EN8. |
| 10 | COMPLETE SHAFT FOR EM RAPPING FOR ESP TYPE:F BHEL TOTAL LENGTH=10380 MM,CONSIST OF 3 NOS SHAFT(SHAFT-I:3720MM,SHAFT-II:3590MM,SHAFTIII: 3050MM),2 NOS SLEEVE TUBE & 2 NOS SET RINGAdditional Data:D50, MOC: EN 8, IS 8500,Stage-I |
| 11 | PIN WHEEL -I,EERM FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Pin Wheel - I of Rapping Mechanism for Emitting Electrode, MOC: IS 2062,EN-362(PIN WITH CASE HARDENING) |
| 12 | PIN WHEEL -II,EERM FOR ESP FAA-6X45-2X108135-2BHELAdditional Data:Pin Wheel - II of Rapping Mechanism for Emitting Electrode, MOC: IS 2062,EN-362(PIN WITH CASE HARDENING) |
| 13 | THRUST BEARING,EERM FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Thrust Bearing of Rapping Mechanism for Emitting Electrode, MOC: FE540 , IS 8500 |
| 14 | PAD,EERM FOR ESP FAA-6X45-2X108135-2 BHELAdditional Data:Pad of Rapping Mechanism for Emitting Electrode,MOC: FG 260, IS 210 |
| 15 | SHAFT-I ASSEMBLY,EERM,VERTICAL FOR ESPTYPE:FAA-6X45-2X108135-2 BHELAdditional Data:Shaft- I assembly of Rapping Mechanism forEmitting Electrode, length 2502mm,MOC: EN 8/IS 8500 |
| 16 | SHAFT-II,EERM,VERTICAL FOR ESPTYPE:FAA-6X45-2X108135-2 BHELAdditional Data:Shaft- II of Rapping Mechanism for Emitting Electrode,Length 3350mm,MOC: EN 8/IS 8500 |
| 17 | SHAFT- III OF RAPPING MECHANISMAdditional Data:Shaft- III of Rapping Mechanism for Emitting Electrode,Stage-I (length 3355)MOC: EN 8/IS 8500 |
| 18 | SHAFT END OF COMPLETE SHAFT,GDRM FOR ESPTYPE:FAA-6X45-2X108135-2 BHELLENGTH=1890MMAdditional Data:Shaft End of Complete Shaft, ( GDRM,Length 1890,3hole )MOC: EN 8/IS 8500 |
| 19 | SHAFT - II OF COMPLETE SHAFTAdditional Data: Shaft - II of Complete Shaft, ( GDRM,Length 4990, 10hole )MOC: EN 8/IS 8500 |
| 20 | SHAFT - III OF COMPLETE SHAFTAdditional Data:Shaft - III of Complete Shaft,(GDRM, Length 4205,8hole)MOC: EN 8/IS 8500 |
| 21 | SHAFT,COMPLETE SHAFTAdditional Data:Shaft , complete shaft of collecting rapping-1(include end shaft, shaft-1, shaft-2) of length 790mm-2hole, 5090mm-17hole, 5285mm-18hole, ( 2 set ring ), D50MOC: EN 8/IS 8500. |
| 22 | COMPLETE SHAFT FOR CERM-II BHELTOTAL LENGTH= MM,CONSIST OF 3 NOS SHAFT,2 NOS SLEEVE TUBE-I & 2 NOS SET RINGAdditional Data:Stage-1 Complete Shaft TOTAL LENGTH= 10885MM, (Shaft Length 4985 mm, 5090 mm & 790 mm respectively, D50, MOC: EN 8/IS 8500 |
| 23 | SLEEVE TUBE FOR VERTICAL SHAFT OF EERM FOR ESP FAA-6X45-2X108135-2Additional Data:Sleeve Tube for Vertical Shaft of RappingMechanism for Emitting Electrode,MOC: EN 8/IS 2062. |
| 24 | HAMMER,OUTER ARM ## FOR EMMITTING,RAPPING,SMALL,ESPAdditional Data:Hammer, Outer Arm For Emmitting,Rapping (Small) For ESP Outer Arm-1,MOC:IS 2062,EN 8 |
| 25 | SLEEVE TUBE- I OF COMPLETE SHAFTAdditional Data:Sleeve Tube for Collecting Electrode Rapping Shaft, (Shaft sleeve)MOC: EN 8/IS 2062 |
| 26 | SHAFT END,COMPLETE SHAFT,CERM-I/II FOR ESPTYPE:FAA-6X45-2X108135-2 BHELLENGTH=790 MMAdditional Data:Shaft End of Complete Shaft for CollectingElectrode Rapping- I, ( CERM, 790 )MOC: EN 8, IS 8500 |
| 27 | PLAIN BEARING FOR ESP BHEL SUPPLIERAdditional Data:Bearing, Plain 6172-0066 For ESP OverallDimension :160 X50 X 90 mm,Bore Dia-52 mmHole to hole distance-120 mm Material:C.I.;IS-210 Gr.20 |
| 28 | U-GUIDE FOR COLLECTING ELECTRODES FOR ESPFAA-6X45-2X108135-2 BHELAdditional Data:MOC: MS, |
| 29 | SHOCK BAR OF COLLECTING ELECTRODE RAPPING/LOWER HORIZONTAL BEAMS(L=560CM)Additional Data:Shock Bar Angle 100x50x8,(Total 5050mm, length along with shock pad is 5080 mm) |
