|
| 1 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding and removing debries off the premises complete all as specified and as directed. |
| 3 | Demolition of brick work or stone boulderbuilt in cement mortar of any description complete all as specified and as directed. |
| 4 | Demolition of stone slab and tiles of any description or thickness in floors or aprons complete all as specified and as directed. |
| 5 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all specified and as directed. |
| 6 | M&L for 25mm thick cement concrete (1:2:4)type B-O (using 12.5mm graded stone aggregate) as insub base of flooretc complete all asspecified and as directed. |
| 7 | M&L for glazed ceramic coloured tiles in vertical surface of size (450x 350)mm x 7mm thick / (350x250)mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick rendering with CM (1:4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed. |
| 8 | M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith and including over 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 9 | M&L for joint free non-skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm butnexc 0.18 Sqm in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 10 | M&Lfor joint free non-skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm butnexc 0.18 Sqm as in skirtingetc set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10 mm thick rendering with CM (1:4) as on vertical surfaces complete all as spcified and as directed. |
| 11 | M&L for vitrified tiles light shade8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 12 | Description all as per ser item no 11.00 above but in vertical surface of wall, skirting with and including 10 mm thick rendering of CM (1:4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed. |
| 13 | M&L 20(+2mm) thick Granite (of jet black ) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- The cost of making half round moulding on exposed edges shall be deemed to be included in unit quoted rate. |
| 14 | M&L 18 to 20mm thick Granite (of jet black ) work (table rubbed and polished ) as in steps, jambs, gate pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- The cost of making half round moulding on exposed edges shall be deemed to be included in unit quoted rate. |
| 15 | Takingdowncementplasteron brick or concretewall surfaces etcincluding rakingoutjoints, hacking for keys, scrubbing down withwateretc. complete all as specified and as directed. |
| 16 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surface finished even and fair etc complete all asspecified and as directed. |
| 17 | M&Lfor10mm thickcement plater in cement mortar (1:3) as on ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for 15mm thick rendering onbrick or concrete wall surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for preparing new plastered surfaces andapplying two coats of oil bound distemper on wall surfaces with and including over primer with and including over 2mm thick cement base wall care putty complete all as specified and as directed. |
| 20 | Description all as per ser item No 19.00above but as on ceiling completeall as specified andasdirected. |
| 21 | M&L for preparation of newplastered surfaces of wall and applyingtwocoatsofexterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 22 | Taking down chowkats or frames with shutters(Without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed. |
| 24 | M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 25 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 26 | M&L forpressedsteel frame fordoorwithone rebated ofsize (105x 60)mmincludingnecessaryfixing lugs, hinges, lockstrikeplateetccomplete all as specified and as directed. |
| 27 | M&L forpressedsteelframe fordoorwithdouble rebated ofsize(125 x 60) mm includingnecessaryfixing lugs, hinges, lockstrikeplateetccomplete all as specified and as directed. |
| 28 | S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 29 | S&F 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and as directed. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mmfixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | S&F butt hinges, 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 32 | S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed. |
| 33 | S&F cast type anodised aluminium handles of size 150 mm complete all as specified and as directed. |
| 34 | S&F in repairMS powdercoated20 mm diacurtain rodincludingbracketsandendknobs / finials complete all as specified and as directed. |
| 35 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified and as directed. |
| 36 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 37 | S&F power coated aluminium window and ventlator shutters with side hung, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws anodised aluminium fittings complete all as specified and as directed. |
| 38 | S&F aluminium powder coated three track sliding window with mosquito net, two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m, (75x26) mm size Jindal model 20671, shutter plain of size (37.5x15)mm weighing 0.366 Kg/m, Section No 20690 Jindal, with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass, rubber packing, snap beading screws, with horizontal sliding type with stainless steelmesh,frame, with and including powder coated aluminium grill type AL 925 or equvalent grill, cutting in suitable size and fitting with screws and suitable beadings to aluminum window frame etc. complete all as specified and as directed. |
| 39 | S&F 5.50mm thick tinted, sheet glass of selected quality fixed to aluminium frame workcomplete all as specified and as directed. |
| 40 | M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 41 | Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 42 | Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 43 | S&F Tubes, \"medium grade\" 15mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 44 | S&F Tubes, \"medium grade\" 20mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 45 | S&F in repairs 15 mm bore Bib taps, Chromium plated fancy type, long/ short body screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 46 | S&F in repairsof sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915X460mm with bowl size 410X330X160mm all as specified and as directed by Engr-in-charge. |
| 47 | S & F in repair CP Soap dishcomplete all as specified and directed. |
| 48 | S & F in repair CP towel ringcomplete all as specified and directed. |
| 49 | S&Fin repairs15 mm two in one angle valve chromium plated with wall flangeand fancy typewithhigh pressure screwed down and with CP flange of same make complete all as specified and as directed. |
| 50 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F in repairs 15mm bore anglecock, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all specified and as directed. |
| 52 | S&F in repairs sink mixer with swivel spout and 450 mm long braided houses cast copper alloy, chromium plated complete all as specified and as directed. Make -SOL-6319B of jaquar or equivalent in kohler/Marc. |
| 53 | S&F in repairbasin mixer with pop up waste system, Hot and Cold facilites and 450 mm long braidaed hoses chromium platedcomplete all as specified and as directed. Model No- DRC-37005 B of make Jaquar or equivalent in make Kohler/Marc. |
| 54 | S&F in repairsthree way wall mixer with pop up waste system, hot and cold facilites and 450 mm long braidaed hoses chromium platedcomplete all as specified and as directed. Make- Cat No. FUS-29273 UPR of Jaquar or equivalent of make Kohler/Marc. |
| 55 | S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed. |
| 56 | S & F in repair CP paper holdercomplete all as specified and directed. |
| 57 | S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and as directed. |
| 58 | S&F inrepair plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 59 | S&F in repair PVC valveless, syphonic action type, flushing cistern low level, 10 litre capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 60 | S&F in repair brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete all as specified and as directed. |
| 61 | Demolition and breaking up drain pipe 75/100mm dia (Salt glazed ware, AC or PVC) of any type complete all as specified and as directed. |
| 62 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps after every one meter of interval complete all as specified and as directed. |
| 63 | S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete all as specified and as directed. |
| 64 | S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium platedwaste coupling 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper, brackets of mild steelangle iron (35mmx35mmx5mm) of suitable size including two coats of synthetic enamel paint over a coat of primer over angle iron brackets complete all as specified and as directed. |
| 65 | S&F in repair500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layered hoisted and fixed in position complete all as specified and as directed. |
| 66 | S&F in repair 1000 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layered hoisted and fixed in position complete all as specified and as directed. |
| 67 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 69 | S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. fortrusses/ purlins & rafter including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 complete in all respect as specified and as directed. |
| 70 | Excavation in post holes each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25 cm thick, watering and removing surplus spoil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. |
| 71 | M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and as directed. |
| 72 | Dismantling AC/CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified andas directed. |
| 73 | S&F 0.50mm thickPre-painted galvalume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self taping screws complete all as specified and as directed. |
| 74 | S&F 0.50mm thickPre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 75 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width including preparation complete all as specified and as directed. |
| 76 | Demolition of PCC of any discription and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 77 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed. |
| 78 | M&L for75mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etccomplete all as specified and as directed. |
| 79 | M&L for chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set, jointed andpointed in neat cement slurry in floor with and including over 20mm scread bed in cement mortar (1:6) complete all as specified and as directed. |
| 80 | M&L for 60mm thick machine pressed with grey cement and no pigment interlocking factory made paver blocks of any size and shape conforming to IS 15658-2006, M-35 set, jointed and pointed in dry with and including over 25mm thick sand cushioning complete all as specified and as directed. |
| 81 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company, one side prelame and other side plain 18 mm thick celuka PVC Ply for kitchen cabinet/ cupboard shuttercomplete all as specified and as directed. |
| 82 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company .plain 18 mm thick celuka PVC Ply for shelves/partions/drawerscomplete all as specified. |
| 83 | S&F 100 mm size stainless steelhandle complete all as specified and as directed. |
| 84 | S&F 50 mm Magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed. |
| 85 | S&F 50 mm size stainless steel piano hinges complete all as specified and as directed. |
| 86 | S&F 40 mm stainless steel knobs complete all as specified and as directed. |
| 87 | S&F stailess steel telescope channel of size 500mm complete all as specified and as directed. |
| 88 | S&F stainless steel thali basket fo size (550 x 600x 200)mm Grade -304 complete all as specified and as directed. |
| 89 | S&F stainless steelbasket fo size (550 x 600x 200)mm Grade -304 complete all as specified and as directed. |
