|
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 4 | Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 5 | Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 6 | Brick work with Fly Ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) insuperstructure per cum |
| 7 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 8 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 9 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Steel Bar (FE 415/ FE 500) |
| 10 | Rigid smooths centering and shuttering for RCC works including false work and dismentgalling then after casting including cot os materials complete- |
| 11 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 12 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 13 | Colour washing two coat with stone lime and colouring materials per 1 Sqm |
| 14 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 15 | Photography ( before, ongoing & after completion of work ) and other document |
| 16 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 17 | Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from factory to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 18 | Supplying of 160mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 19 | Fitting of un plasticised 160mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from factory to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 20 | Monoblock pump set total head of 20 mtrs capable to discharge 1700 LPM with 12.5HP/9.3KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \"F\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery = 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares. |
| 21 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 6.00 to 9.50 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt meter,Ameter,MCB in complete shape including Indicator Lamp |
| 22 | 4KVAR Capacitor |
| 23 | Cost of motor base plate |
| 24 | Cost of 150 mm dia butterfly valve |
| 25 | Cost of motor hood made out 18 gauge C R sheet |
| 26 | Labour charges for delivery fitting including fitting of N.R.valve, bend, flange, socket and cutting threading of G.I.Pipe and installation. |
| 27 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 28 | 100 mm dia G.I. bend IS No.1239(Part-II/1992) |
| 29 | 100 mm dia GI Flange IS No.1239(Part-II/1992) |
| 30 | 100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand |
| 31 | 100mm dia GI Socket IS 1239 (Part-II/1992 ) |
| 32 | 200 mm M.S. pipes with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipes should be 5.5 mm each pipe should bear ISI specification and manufacturers name / Trade mark. Steel grade of the pipe should be Fe330 |
| 33 | 200 mm Ø MS Flange medium duty as per IS specification |
| 34 | Welding, laying and fitting of 200 mm Ø MS pipe |
| 35 | 100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 36 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 37 | 200 mm Ø PVC Bend (90° W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 38 | 200 mm Ø PVC End Cap (W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 39 | 5/8 \" x12\" Nut bolt & washer F.T. for foundation |
| 40 | ⅛\" thick Rubber Insertion as per IS specification |
| 41 | 100x100x25mm G.I. Tee with Plug |
| 42 | Cost of 150mm x 150mm x 100 mmM.S. Riser Tee made ofM.S.Pipe 300 mm long fitted with one mtr long 100 mmQ M.S.Pipe(ISI mark) welded with 2 nos 100 mm Q m.S.flange in between 1 mtr M.S.pipe and 0.25 mtr long 100 mmQ m.S.pipe fitted horizontalley with 2 nos of 100 mmQ M.S.elbow with locking arrengments. |
| 43 | Cost of 200mm x200mm x 160 mmPVCTee |
| 44 | Cost of 100mm CI Sluice Valve |
| 45 | Cost of 160 mm dia PVC END cap |
| 46 | 63 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark. |
| 47 | 3 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. |
| 48 | M.S. Door shutter for pannel chamber made of with 20gauge CR sheet pannel as per approved size (1.20 × 0.60)Mtr.including cost of all materials, Painting, fitting and fixing the door etc. complete as per the direction of Engineer -incharge. |
| 49 | Cost of Iron framed Clamp for holding starter main switch etc. |
| 50 | cost of 200mm×110mm dia PVC reducing socket. |
| 51 | Supply all material, labour,T & P and Construction of 11KV 3 phase 3 wireHT line(40mtr average span length) with 9mtr long 300kg PSC pole supported and 55 sqmm AAA conductoras per RE standard and TPCODL specification asper line diagram, including painting in Navy blue colour band with inscription of OLIC etcin eachpole etc complete all as per dirction of EIC.. |
| 52 | Supply all material, labour,T & P and Construction of3 phase 4 wireLT line(33mtr average span length) with 9mtr long 300kg PSC pole with 3X35+1X25)sqmm AB Cable as per RE standard andTPCODL specification, as per line diagramincluding painting in Navy blue colour band with inscription of OLIC in each pole etc. pole complete allas per dirction of EIC. |
| 53 | Supply all material, labour,T & P and Construction of 11/0.4 KV 25KVA (BIS-LEV-II star rated) double pole mounted sub-station with 9 mtr long 300kg PSC pole supported and90Amp MCCB with all materials required as per RE standard and TPCODL specification and 2 mtr hight G.I. Chain linking fencing size 4.65m x 3.10m with suitable gate, sand filling and metal spreding etc. complete all as perper dirction of EIC.. |
| 54 | Supplying all materials, labour, T&P and Earthing installationincluding excavation of two nos of earth pits of size 1.2 mtr x1.2mtrx2.5 mtr and filling the earth pit with alternative layer of 0.60mtr x0.60mtr x0.30 mtr of common slat and charcoal around theG.I. pipe (40 mm dia & 6mtr) including allcost of salt, charcoal, 100amp cable socket, soft solder, G.I. nut bolts , 40mm dia G.I.pipe 6 m and No.8 GI Wire 10 Kg including tranportation of materials to site .etc complete all.as per dirction of EIC.. |
| 55 | Supplying all materials, labour, T&P and Electrical Installation & energisation including Wiring , Clipping, andfitting of starter, main switch etc.complete all .as per dirction of EIC.. |
