|
| 1 | Dismantling wall and ceiling board,of any description, complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for 12 mm thick prelaminated particle board interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls, complete all as specified and directed by Engr-in-Charge.( The rates are include to taking down and refixing electrical fitting and fixtureproparly in working condition) complete all as specified and directed by Engr-Charge. |
| 3 | S&F 20mm thick Second class hardwood Boarding, Planed one side with butt joints, fixed with nails in any situation as in eaves boards and like at any height including necessary scafoldins if reqd, complete all as specified and directed by Engr-in-Charge. |
| 4 | S&F false ceiling with 4mm thick E-board of approved make white prelaminated set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer, complete all as specified and directed by Engr-in-Charge. Note.All exposed surface of grid work shall be powder coated white. |
| 5 | S & F solid PVC wall wood grain printed of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification. |
| 6 | S & F 5 mm thick plain colour PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F Solid PVC strip5mm,thick PVC sheet ,for wall panelling as a beading on top surface the sheetfor wall lining/panelling as per manufactures specification and instruction, complete all as specified and directed by Engr-in-Charge. |
| 8 | S & F in repair for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floors, complete all as specified and directed by Engr-in-Charge. |
| 9 | Dismentling timber in fillets, rails, posts, rafter, purlin etc under 40 Sqcm in section framed work, complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 13 and not Exc 25 Sqcm, complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 3 Sqcm and not Exc 6 Sqcm, complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for preparation of new wooden surfaces of any description not otherwise described n exc 10cm width or girth and applying two coats of synthetic enamel paint over & incl a coat of primer, complete all as specified and directed by Engr-in-Charge. |
| 13 | Dismantling of plain or corrugatedsheeting , any guage, thickness and including Naintital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs wall etc with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge. |
| 15 | S & Fpre-paintedgalvatume aluminium zinc coating GI based corrugated steel Sheet (AZ-150) having thickness 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 16 | S & F pre-paintedgalvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter, Sun shed etcfixed with self tapping screws , complete all as specified and directed by Engr-in-Charge. |
| 17 | Dismantling Mild Steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F roof truss (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. complete all as specifiedtaeg framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. conforming to Fe-410, Gde E-250 Quality-A, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L forpreparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over & incl a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L forpreparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 21 | Demolition of exisiting damaged stone/Brick/ Concrete Block masonary built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed by Engr-in-Charge. |
| 22 | Material & labour for random rubble stone masonary , uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge. |
| 23 | Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished rendering surfaces even and smooth (without using extra cement), complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for 5mm thick rendering on fair faces ofconcrete surfaces in CM 1:3 finished rendering surfaces even and smooth (without using extra cement), complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for two coats of oil bound distemper on walls on newlyplastered surfaces over & Incl 3mm thick putty including preparation of surfaces by brooming or by steel wire brushing, complete all as specified by Engineer-in-Charge. |
