|
| 1 | Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in any type of soil. |
| 3 | M&L forPCC 1:2:4 Type B-2 using 40 mm graded stone aggregate as in foundations, filling and mass concretecomplete all as specified and directed. |
| 4 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)complete all as specified and as directed. |
| 5 | S & F of roof trusses (framed or tubular sections) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular pipes or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 6 | S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc conforming to Fe-290 Gde-E-165 as in MS Posts complete all as specified and directed |
| 7 | S&FHand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E 165 complete all as specified and directed. |
| 8 | Supply and fix Mild steel screw bolts (machine made) of dia 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt and n exc 5cm long complete all as specified and directed |
| 9 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 10 | S&F prepainted galvalume aluminum zinccoatingGI based plain steel sheet 0.50 mm thickof any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed |
| 11 | M&L for preparation ofold painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint overtwo coat of Epoxy primer on steel surfaces complete all as specified and directed. |
| 12 | M&L for preparation ofnew Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete |
| 13 | S & F 220mm width rectangular UPVC heavy duty eaves gutter of pressure rating 6 kg/cm2 of approved make including necessary fitting like bend WC/MS clips etc complete all as specified. |
| 14 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed. |
| 15 | S&F PVC (SWR) bends 110 mm dia single socketed in any length , with rubber rings complete all as specified and directed |
| 16 | Surface excavation n.exc. 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 17 | M & L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed by Engr- In- Charge. |
| 18 | M&L cement concrete in foundation type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed. |
| 19 | M&L for Formwork to sides rough finished surface of concretefoundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 20 | M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 21 | All as per item No 20, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 22 | Material andlabourforRCC M-30 design mixusing20 mm graded stone aggregate as in foundation including rafts footing,foundation beams, plinth beams, base for columns, under reamed piles etc , complete all as specified and as directed |
| 23 | M&L for Damp proof course to horizontal or vertical surfaces including necessary formwork, 40 mm thick, in Cement concrete 1:2:4 type B-0(12.5 mm graded stone aggregate), complete all as specified. |
| 24 | M&L applying evenly a tack coat of bitumen 85/25 at the rate of 1.20Kg/Sqm. including cleaning surfaces complete all as specified. |
| 25 | M&L Polythene film, 150 micron thick, laid over a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified. |
| 26 | M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed. |
| 27 | M&L Rendering 10mm thick in CM 1:6 internally on brick or concrete surfaces of wall complete all as specified. |
| 28 | M&Lcement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using Approved WPC complete all as specified and as directed.(Note : WPC shall be meassured separately under relevant items of BoQ) |
| 29 | Supply only Liquid water proofing compound complete all as specified. |
| 30 | M & L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima protek) paint over a coat of primer complete all as specified and as directed by the Engineer-In-Charge. |
| 31 | M & L forapplying one coat of weather proof (Apex Ultima protek or equivalent) paint on old plastered surfaces incl preparation of old surfaces of wall complete all as specified and as directed. |
| 32 | M & L for preparation of new surfaces and applyingTwo coat of white wash on Wallall as speciedand directed by Engineer in charge |
| 33 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners are including). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 34 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flushdoor shutter of size35mm thick comprising of virginpolymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 andresistance to spread of flame of Class A category withproperty of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges andnecessary S.S screws shall be paid separately) |
| 35 | S/F 100 mm long mild steel butt hinges medium weight complete all as specified. |
| 36 | S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. |
| 37 | S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 38 | S&F aluminum bow handle \"D\" type anodized 150mm long complete all as specified and directed. |
| 39 | M&L for 40mm thick PCC 1:2:4 type B0(using 12.5mm graded stone aggregate ) astop surface of pavement, flooring etc. and surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 40 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completer and including 15mm thickscreed in CM 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completer and including 15mm thickscreed in CM 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed by Engr-in-Charge. |
| 42 | S&Fpowder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 43 | S&Fpowder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) . hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. complete all as specified |
| 44 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed. |
| 45 | M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified |
| 46 | M&L 75mm thick PCC Type C-1, 1:3:6 (20mm graded agg) as in plinth protection finished even and smooth without using extra cement |
| 47 | Material andlabourforRCC M-30 design mix using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specifed. |
| 48 | M&L for Type D-2 PCC 1:4:8 ( 40mm graded aggregate) in foundations, sub base, filling and mass concrete, complete all as specifed. |
| 49 | M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed |
| 50 | M&L for providing cement concrete Type B-0, 1:2:4 (using 12.50mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 51 | M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed. |
| 52 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over not less than12.5mm coarse aggregate compacting and proper embedding/ laying of inter locking paver blocks into the coarse aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified(Note : Coarse aggregate shall be measured and paid separately) |
| 53 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed or laid/ inserted with screwssuspended on Anodised aluminium snap grid frame work for false ceiling as per manufacturers instructionsall as specified and directed by Engr-in-Charge. |
| 54 | Supply, Providing and fixingAnodised aluminium snap grid frame work for false ceiling. The aluminium framework is supported on side wall with the use of 25mm ISA angles complete as per manufacturer\"sspecification & drawings Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape all as specified and directed by Engr-in-Charge. |
| 55 | Supply, Providing and fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete incl G.I. hooksfixed to roof slab as specified and directed by Engr-in-Charge. |
| 56 | M & L for complete removal of existing treatment & preparation old plaster surface of wall and applying 1.5mm- 3 mm thick wall care putty on new wall surfaces, Priming plastered and other surfaces with alkali resistant priming paint and applying two coats of oil bound distemper on walls, including applying additional coats wherever required to achieve even shade and colourall as specified and directed. |
| 57 | M&L fortwo coats of oil bound distemper over a coat of primer on Old surfaces of wall including preparation of plastered surface of wall over 1.5mm thick wall care putty& complete removal of existing treatment complete all as specified and as directed. |
| 58 | M & L for two coat of oil bound distemper over one coat of primer including necessary scaffolding and shuttering as on ceiling complete as directed as specified and directed by Engr-in-Charge. |
| 59 | M & L for preparation new plastered surface of walland applying 1.5mm- 3 mm thick wall care putty on new wall surfaces, Priming plastered and other surfaces with alkali resistant priming paint and applying two coats of oil bound distemper on walls, including applying additional coats wherever required to achieve even shade and colour all as specified and directed. |
| 60 | Demolition of Concrete of any description and in any position not otherwise specifically provided for |
| 61 | S & F aluminium anodised powder coated fixed/sliding type (two track) windows with frames of size- side, top rail & intermediate sections size 63.5mm x38.10mmx1.5mm with & including 4mm thick tinted glass as directed incl of screwing of frame glass with necessary joints cleats, glazing clips, rubber packing ,with suitable beading channel, gaskets, rollers,rollers , maruthi locks, suitable handle fixed to wall with necessary screws & plugscomplete all as specified & directed(Rates are inclusive of S & F of 4mm tinted glass reqd to be fitted in shutters). |
| 62 | S&F side hung/sliding type aluminumpowder coateddoor shutter with frames of size - 44.5mmx50mmx1.5 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable no of handles, tower bolt, SS butt hinges(as per requirement),mortice lock 4 lever with 65 mm latch size includingaluminiumanodized door frame of size 63.5mmx 38.10mm x1.5 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closerper shutter & 4 mm thick tinted glass /9mm Thick pre laminated particle board with decorative lamination on both sides/3 to 4mm thick Aluminium Composite panel reqd to be fitted in shutters is included in the item ) |
| 63 | S&F aluminum powder coatedpartition fixed/sliding type with frames of size -side , top rail and intermidiate sections size 63.50mmx38.10mmx1.5 mm ,incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading,fixed to wall/posts with necessary screws and plug complete all as specified & directed. (rates for 4 mm thick tinted glass /9mm Thick pre laminated particle board with decorative lamination on both sides/3 to 4mm thick Aluminium Composite panel reqd to be fitted in shutters is included in the item ) |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 65 | Demolition of brick work/ stone /boulders built in cement mortar including all quoins, arches , pillars etc complete all arte specified and directed |
| 66 | Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 67 | Taking down cementplaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc. |
| 68 | M&L Glazed ceramic coloured tiles in vertical surfaces 7 to 8mm thick, area of each tile exe 0.10 Sqm but n exc 0.20Sqm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over with and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.. |
| 69 | Material & Labour for applying Two or more coats of 10 % Premium acrylic emulsion paint , Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1.5-3mm thick wall care 9utty new surfaces including preparation of new surfaces of wall. complete all as specified and as directed. |
| 70 | M & L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed |
| 71 | M & L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and as directed |
| 72 | S & F soft closing hinges complete all as specified and as directed. |
| 73 | S&F 100mm longSS handles for cupboards fixed with stainless steel screws complete all as specified and as directed. |
| 74 | M&L for 3mm thick Aluminium Composite panel complete all as specified and as directed. |
| 75 | S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) over & incl 15mm thick screed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 76 | Rounding to edges of stone slabs one edge, such as in window cills and other similar situations |
| 77 | Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. |
| 78 | Supply, Providing and fixing suspended false ceiling consisiting of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted with screws suspended on Anodised aluminium snap grid frame work for false ceiling all as specified including G.I. hooks & hangers 6mm dia G.I. of required fixed to roof slab. The aluminium framework is supported on side wall with the use of 1\" x 1\" angles complete as per manufacturer\"sspecification & drawings Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat of oil bound distemperover one coat of primer.(As per the recommendations/ practice) including necessary scaffolding and shuttering complete as directed as specified and directed by Engr-in-Charge. |
| 79 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 80 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 15 mm thick in CM 1:6, complete all as specified and directed. |
| 81 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 82 | Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge. |
| 83 | All as per item No. 82 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and as directed by the Engr-in-Charge. |
| 84 | All as per item No. 82 here in before but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and as directed by the Engr-in-Charge. |
| 85 | All as per item No. 82 here in before but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 AMp socket outlet point on independent board complete all as specified and as directed by the Engr-in-Charge. |
| 86 | All as per item No. 82 here-in-before but one 3 pin socket outlet for 15Amps socket point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. |
| 87 | Supply and fix ceiling rose surface bakelite 65 x 50 mm 3 terminals 240 volt 50 Hz complete all as specified and as directed by the Engr-in-Charge. |
| 88 | S&F modular type sockets 6 Amp-2/3 pin combined 2 module complete all as specified and as directed by the Engr-in-Charge. |
| 89 | S&F switch modular type single pole, 6 Amps, one module complete all as specified and as directed by the Engr-in-Charge. |
| 90 | S&F modular sockets 6 Amp/16 Amps, 2/3 pin combined 2 module complete all as specified and as directed by the Engr-in-Charge. |
| 91 | S&F switch modular type 1 module, 16 Amps, one way complete all as specified and as directed by the Engr-in-Charge. |
| 92 | S&F modular fanstep regulator 120 W,2 module complete all as specified and as directed by the Engr-in-Charge. |
| 93 | Supply and fixing inLED lights fitting 1x 20 W, 220V, AC decorative box type,125 lumen/wattwith driver, holderand high quality materials and design exttruded aluminium housing enhances safety, high quality PC diffuser reliable and robust housing structure including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and as directed by the Engr-in-Charge. |
| 94 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 95 | M/L submain wiring with 2 single core 2.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 2.5 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 2.5 sqmm size PVC cable , one run of 2.5 Sqmm size PVC cableas earth wire and one run of PVC conduit shall be measured as one unit length |
| 96 | M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cableas earth wire and one run of PVC conduit shall be measured as one unit length |
| 97 | Material and labour for submain wiring with 2 runs 4.0 Sq mm single core,PVC insulated, unsheathed, multistranded copper conductorFRLSH cable 1100 volts grade drawn through incl provn of PVC concealed conduit not less then 25 mmwith all accessories , one run of 4.0 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grademultistranded copper conductor FRLSH cableas earth continuityconductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and as directed by the Engr-in-Charge.Note:-Three runs of4 Sqmm size PVC copper cable, and one run of PVC conduit shallbe measured as one unit length. |
| 98 | Supply and fix in Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,240 volts ,50 Hzinculding taking down old one complete all as specified and as directed by the Engr-in-Charge. |
| 99 | S&F Sheet metal enclosure for MCB DB, SPN, 8 ways, double door, with 200 amps rated bus bar, having IP-43 protection including taking down old DB ccomplete all as specified and as directed by the Engr-in-Charge. |
| 100 | S&F Sheet metal enclosure for MCB DB, SPN, 4 ways, double door, with 200 amps rated bus bar, having IP-43 protection including taking down old DB ccomplete all as specified and as directed by the Engr-in-Charge. |
| 101 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB)40- 63 ampsof twopoles and current carrying capacity in the MCB SPN complete with connection testing and commissioning complete all as specified and as directed by the Engr-in-Charge. |
| 102 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) 32 ampsof twopoles and current carrying capacity in the MCB SPN complete with connection testing and commissioning complete all as specified and as directed by the Engr-in-Charge. |
| 103 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by the Engr-in-Charge. |
| 104 | Supply and fixing ceiling fans completewith blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC) to match with existing surfacecomplete all as specified and as directed by the Engr-in-Charge. |
| 105 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.Make Crompton Cat Part No. TFS-504-100-57-60D-SL-GL-NSGor its equivalent make from the list of makes |
| 107 | M & L insulated, galvanised steel strip or wire armouredheavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area6 sqmm 2 core complete all as specified and as directed by Engr-in-Charge. |
| 108 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 109 | S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed.Make:-Havells - Turbo force SPorequivalent model of manufacturers mentioned in list of manufacturers |
| 110 | Amount of Schedule of credit of for Rs 41,395.00 shall be deducted from quoted amount. |
