|
| 1 | PART-I:- Dismantling plain or corrugated steel sheeting of any gauge, thickness as in roof covering complete all as specified and as directed. |
| 2 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 3 | Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 4 | Corrugated galvanized iron mild steel sheets 0.63mm thick, grade ‘O’, with 120 grams per square metre zinc coating fixed with \"J\" or \"L\" hook as in roof covering with two corrugation side lap. (Horizontal distance of side lap shall not be less than 145mm and depth of corrugation shall be 12.50mm), complete all as specified and directed. |
| 5 | 0.80mm thick plain galvainsed mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120, complete all as specified and directed. |
| 6 | Demolition of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc., complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. |
| 7 | Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 8 | Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 9 | Dismantling of ceiling board (fibre, pulp, Insulation etc.) or insulation of boards/slab /blankets, any thickness with frame work including cover fillets cornices etc.complete all as specified and as directed. |
| 10 | GI frame work anodized snap grid frame work of size605 mm x 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer\"s catalogue/instruction), cutting holes for electrical fittings fixed on an including aluminium tee of size 25mmx25mmx1.50mm as main runner, aluminium tee of size 25mmx25mmx1.25mm as cross runner and aluminium angle of size 25mmx25mmx1.25mm at the perimeter suspended from soffit at approx 900mm centre to centre with hangers 6mm dia galvanized (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanized iron flat 40mmx3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including necessary scaffolding, complete all as specified and directed. |
| 11 | 6mm thick non asbestos fiber cement building boards (Decorative E Board) as in ceiling fixed or laid/ inserted to timber/GI / aluminium framework fixed with nails, complete all as specified and directed. |
| 12 | Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed. |
| 13 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, complete all as specified and directed. |
| 14 | 2nd class soft wood (Kail) as in scantling clean sawn timber fixed in framed including preparation and applying one coat of black bituminous paint, complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 16 | Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290 Gde E-165, steel work, complete all as specified and directed. |
| 17 | Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240s, steel work, complete all as specified and directed. |
| 18 | Mild Steel framed work as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete, conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 19 | Dismantling boarding, any discription fixed in any postion with nails, complete all as specified and directed. |
| 20 | Hardwood 2nd class 15mm thick boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side with butt joints, complete all as specified and directed. |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. |
| 23 | Plain cement concrete M-15, nominal mix, type B-0, using 12.50mm graded mechanically crushed stone aggregate as in top layer of flooring, 25mm thick, surface finished even and fair for receiving floor finishes, complete all as specified and directed. |
| 24 | Machine cut kota stone slab flooring 18-20mm thick of size not less than 550 mm X 550mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC sub base, complete all as specified and directed. |
| 25 | Machine cut kota stone,18-20mm thick, as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in vertical surfaces such as skirting/dado/riser to step/pillar aid over and including 10mm thick bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. |
| 26 | Vitrified ceramic tiles light shade, 8 to 10mm thick (Square/ rectangular) area of each tile exc. 0.36 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 27 | Vitrified ceramic tiles light shade, 8 to 10mm thick (Square/ rectangular) area of each tile exc. 0.36 Sqm, in vertical surfaces such as skirting and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 28 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick cement screed /rendering in cement mortar 1:6 complete all as specified and as directed. |
| 29 | Glazed ceramiccoloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm, 450x 300mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in Skirting, Dados, etc.,fixed over 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 30 | Plain cement concrete M-7.5, nominal mix, type D-2, using 40mm graded mechanically crushed stone aggregate as in sub base to floor, 75mm thick, surface finished even and fair to receive top surface, complete all as specified and directed. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 32 | Chequered cement concrete tiles machine pressed of size 20cmx20cmx 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 33 | Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. |
| 34 | Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on other than fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 35 | Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement with WPC, complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately. |
| 36 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 37 | Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 38 | Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer over 2mm thick wall care putty including preparation of surface, complete all as specified and directed by Enge-In-Charge. |
| 39 | Preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/ 10 sqm, complete all as specified and directed. |
| 40 | Three coats of white wash on newly plastered or previously undecorated surfaces of ceiling including preparation of surfaces, complete all as specified and directed. |
| 41 | Three coats of white wash on newly plastered or previously undecorated surfaces of walls including preparation of surfaces, complete all as specified and directed. |
| 42 | Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mmthick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). |
| 43 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, all as specified. |
| 44 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, all as specified. |
| 45 | Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, all as specified. |
| 46 | Taking down shutters of any description not exc. 1 Sqm each and removing from site, all as specified. |
| 47 | Pressed steel frames of size 125x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 48 | M&L for PCC 1:2:4 type B-0 with using 12.50mm graded stone aggregate as in bed block, bed plates etc. For embedding hold fasts etc. complete all as specified and directed. |
| 49 | M&L for PCCtype C-1 (1:3:6) using 20mm graded curshed stone aggregate as infilling in door frame and mass concrete etc complete all as specified. |
| 50 | Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particlewith commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 51 | 30mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 52 | Factory madesecond class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. |
| 53 | Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixedwith stainless steel wire staples or wooden beadscomplete all as specified and as directed. |
| 54 | Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixedin repair with stainless steel wire staples or wooden beads complete all as specified and as directed. |
| 55 | Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 56 | Sheet glass 4mm thick ordinary quality and glazingwith oil putty wooden beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed. |
| 57 | 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 58 | Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. |
| 59 | Applying two coats of synthetic enamel paint over a coat of red oxide on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed. |
| 60 | Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as er specification & drawing on page No180 of MES SSR 2020 Part-II, complete all as specified and directed. |
| 61 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed. |
| 62 | S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 63 | S & F 100 mm long aluminium anodised barrel towerbolt complete all as specified and as directed. |
| 64 | S & F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 65 | S & F 100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 66 | S & F 100 mm longstainless steel Butt Hinges Medium Weight, Cold Rolledand fixed complete all as specified and as directed. |
| 67 | S & F 75 mm longstainless steel Butt Hinges Medium Weight, Cold Rolledand fixed complete all as specified and as directed. |
| 68 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed. |
| 69 | Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover andchromium plated jet including 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends , fixedcomplete, including PVC valveless, syphonic action type flushing cistern 10 litres capacitylow level with inlet, ball valve, float and handle with brackets with including 32mm diaPVC long bend flush pipe 90cm long pipe, fixed in repair, complete all as specified and directed. |
| 70 | Wash hand basins, Vitreous China (oval type, coloured) size 435 mm x 505 mm x 180 mm, excluding tap etc including cast iron brackets duly painted including cutting and pinning in ends and making good disturbed surfaces in cement mortar (1:3) as well as matching with existing with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, chain and plug, PVC 32mm dia flush pipe and all accessories fixed in repairs complete as all specified. Make: Cat Part No. KUS-WHT-35601 of Jaquar or equivalent makes mentioned in Appx \"C\" |
| 71 | Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handlewith brackets with PVC 32mm diaflushing pipe, anti-syphonage pipe, fixed in repairs, complete all as specified and directed. |
| 72 | Wash basins, Vitreous China (Flat back type or angle back) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps fancy type, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixedin repair, complete all as specified and directed. |
| 73 | 32mm dia High density poly ethylene pipes (HDPE) of pressure rating 6 kg/ cm2 laid in trenches/ceiling/floors, complete all as specified and directed. |
| 74 | 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repair, complete all as specified and directed. |
| 75 | Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified and directed. |
| 76 | Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 77 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 78 | Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed. |
| 79 | Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed. |
| 80 | Bib taps, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed. |
| 81 | Chromium plated brass shower rose, type, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified and directed. |
| 82 | Angular Stop Cock with Wall Flange, cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. |
| 83 | Harrison 25mm bore Curtain rails, mild steel, chromium plated with fixing brackets, stops and roller etc. fixed in repair, complete all as specified and directed. |
| 84 | Disconnecting existing tanks and removing to store water tanks of capacity n.exc 500 litre, complete all as specified and directed. |
| 85 | Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washerscomplete and making connections with existing water supply line, complete all as specified and directed. |
| 86 | Disconnecting existing tanks and removing to store water tanks of capacity exc 500 litres & n.exc 1000 litre, complete all as specified and directed. |
| 87 | Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washerscomplete and making connections with existing water supply line, complete all as specified and directed. |
| 88 | Steel plate rack of size 900mmx750mmX250mm made of stainless steel 0.60mm thick fixed with plugs,washers and steel screws including fixed inwall with screws ands PVCsleeve of required or fixing arrangement complete and fixed in repair, complete all as specified and directed. |
| 89 | Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm, fixed in repair, complete all as specified and directed. |
| 90 | 20mm bore Ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 91 | 20mm bore Ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed repair, complete all as specified and directed. |
| 92 | Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacitylow level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed. |
| 93 | PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc,complete all as specified and directed.. |
| 94 | PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, single socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc,complete all as specified and directed. |
| 95 | PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed, in any length with Rubber Ring Joints laid in floor, including taking down unserviceable pipe, fittings, etc,complete all as specified and directed.. |
| 96 | PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, single socketed, in any length with Rubber Ring Joints laid in floor, including taking down unserviceable pipe, fittings, etc,complete all as specified and directed. |
| 97 | M & L for PVC (SWR) 110mm bore (dia), Bends any type,with Access Door, etc. and Jointing with Solvent Cement, fixed in repair, complete all as specified and as directed. |
| 98 | M & L for PVC (SWR) 75mm bore (dia), Bends any type,and Jointing with Solvent Cement, fixed in repair, complete all as specified and as directed. |
| 99 | M & L for PVC (SWR) 110mm bore (dia),Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, fixed in repair, complete all as specified and as directed. |
| 100 | M & L for PVC (SWR) 75mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, fixed in repair, complete all as specified and as directed. |
| 101 | S & F for PVC (SWR) floor trap 75mm with gratings including Jointing to waste pipe with solvent cement, fixed in repair, complete all as specified and directed. . |
| 102 | S & F 5.50mm thick Sheet glass, ordinary quality and fixed with rubber packing and aluminium snap beading in aluminium doors in squareexc 0.5 sq. m in each panecomplete all as specified and directed. |
| 103 | Mortice lock, brass, vertical type, size 100mm, 4 lever, fixed into aluminium door shutter, complete all as specified and directed. |
| 104 | Aluminium (diecast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed. |
| 105 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair, complete all as specified and directed. |
| 106 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed. |
| 107 | Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 108 | Chromium plated(Health Faucet) (ABS Body) with 1 Meter Long PVC Tube & Wall Hook and fixed in repair, complete all as specified and directed. |
| 109 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mmx35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No\"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/03. Note:- (i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. |
| 110 | Taking down aluminium door shutter n. exc 2 Sqm each, taking out servicable glass panes, hydraulic door clocer, but hinges,double action hydraulically regulated floor spring and other fittings, if required carefull and refixing in the same opening after repairs of unserviceable or loosened joints/cleats of top rail/bottom rails/lock rails and styles etc and fixing old serviceable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fitting complete all as directed by Engr-in-Charge.NOTE:- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule. |
| 111 | Natural colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of :- (a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. (b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. (c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. (d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM. (e) Anodised aluminium handle, fancy type,350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-1 using 12.5mm graded stone aggregate to fix hold fasts all as directed. Note:-(i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys. |
| 112 | Natural colour 15 micron sliding three track anodized aluminium window chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing window handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of :- (a) Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881Kg/RM. (b) Shutter top member 47.62 x 44.45 x 1.14 mm weighing 0.607 Kg/RM. (c) Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. d) Natural colour 15 micron anodised aluminium anodised frame of chowkhat of section 85x44.45x1.80mm weighing 1.302 Kg/RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (f) The size of Anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos)and aluminium anodised aluminium tower bolt of size 100mm (02 Nos). |
| 113 | Taking down cement plaster of any description on concrete surfaces of roofincluding racking out joints, hacking for key, scrubbing down with water, removing dust, debries/rubbish etc, complete all as specified and directed. |
| 114 | M&L for 15mm thick screed bed /plaster in cement mortar 1:4 in order to maintain proper slope of existing RCC roof surface, complete all as specified and directed. |
| 115 | Water proofing treatment over terrace using SHALIURETHANE- BTD OF STP MAKE OR EQUIVALENT as approved by GE, high solid content single component water based liquid applied elastomeric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.5mm, having solid content of more than 80% elongation of 500+(-) 50%, laid over reinforcing layer on non woven geo-textile mesh of 40/50, 50 gms, including applying self primer coat by diluting with 1:1 ratio @ 0.40 kg per sqm and surface preparation including cleaning of existing treatment, complete all as specified and directed. |
| 116 | Disconnecting existing PVC/ferro cement/MStanks capacity exc.250 litres but n. exc 500 litres, for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed by Engr-In-Charge. |
| 117 | Disconnecting existing PVC/ferro cement/MStanks capacity exc. 500 litres but n. exc 1000 litres, for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed by Engr-In-Charge. |
| 118 | Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in kitchen platform, window cill /steps laid over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed. |
| 119 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 120 | 5mm thick PVC sheet fillet with 35mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed. |
| 121 | S&F inBlackout roller blinds for windows UV protection of required size and shade including necessary fittings complete all as per directed by Engr in Charge/GE. Make Johnson or equivalent |
| 122 | S&F in repair 8 mm thick Laminated wooden flooring with plank size not less than 1200mm x 190mm (with unilin/tongue-groove locking arrangement)having 0.20mm thick top abrasive layer over a decorative layer followed by a hingh density fiber board having densitry > 850kg/cum, substrate core over a rasin saturated packing layer and installing through unilin/tongue-groove system (having locking strenght not less than 1000kg/mtr) over a 2mm thick under layer polyurethene foam on polythene sheet 250micron over a smooth/flat hard sub-floor free from moisture (less than 8%) , grease etccomplete in all respect requisite accessories like end profile tranisition profile, reducer tee profile etc wherever required and preparation of base including all other incidental works as per direction and satisfaction of Engineer-in-Charge. |
