|
| 1 | Non-Executive Residential BuildingDesign, Engineering, Procurement, Construction, Testing, Commissioning and Handing over of minimum 3 star GRIHA or equivalent rated Residential Buildings (S+13)in RCC Framed Earthquake Resistant Structure including vetting from IIT/NIT, including OverheadTankandUnderground Sump, pump with pump houseasperthe capacity required , Covered Structural shed for parking, Community Center Building (G+1), external elevation work as per building 3D views enclosed with the tender,area lighting, external& internal electricalworks, Civil External service connection, external& internalplumbingworks, internal water supply and sanitary installations, CCTV, Lifts as per PJS, Fire ProtectionSystem, landscaping, boundary wall with gates,externaldevelopment, siteLeveling, internal Road &Pathways, Sewer,Water Supply, StormWaterDrains, Horticulture, StreetLighting,Extension of Electric/Telecom/Water Lines from source of Local bodies / existing facilities to desiredplace,Rising Mains/Bus Duct, DG set, UPS, HVAC, HT & LT Sub station, Fire detection & alarm system, STP, Rainwater Harvesting, Water proofing treatment, Antitermite treatment, Solar Photo Voltaic Power Generation System,Emergency light & illuminated signages, etc. so as to make the building completely functional including obtaining all statutory approvals, GRIHA Approvals as applicable during construction & Post construction as applicable. All the above work shall be executed as per tender scope of work and user requirements for specified Plinth area (Floor to Floor Height 3.15 meter), detailed Design Basis Reports (DBR’s), Technical Specifications, Tender Drawings and conditions elaborated in this tender document and CPWD Standards on EPC mode (Turnkey Basis). ( Tentative plinth area = 60009 sqm) |
| 2 | Sr. Executive Residential BuildingDesign, Engineering, Procurement, Construction, Testing, Commissioning and Handing over of minimum 3 star GRIHA or equivalent rated Residential Buildings (S+8)in RCC Framed Earthquake Resistant Structure including vetting from IIT/NIT, including OverheadTankandUnderground Sump, pump with pump houseasperthe capacity required , Covered Structural shed for parking, external elevation work as per building 3D views enclosed with the tender,area lighting, external& internal electricalworks, Civil External service connection, external& internalplumbingworks, internal water supply and sanitary installations, CCTV, Lifts as per PJS, Fire ProtectionSystem, landscaping,externaldevelopment, siteLeveling, internal Road &Pathways, Sewer,Water Supply, StormWaterDrains, Horticulture, StreetLighting,Extension of Electric/Water Lines from source of Local bodies / existing facilities to desiredplace,Rising Mains/Bus Duct, DG set, UPS, HVAC, Package Sub station, Fire detection & alarm system, STP, Rainwater Harvesting, Water proofing treatment, Antitermite treatment, Solar Photo Voltaic Power Generation System,Emergency light & illuminated signages, etc. so as to make the building completely functional including obtaining all statutory approvals, GRIHA Approvals as applicable during construction & Post construction as applicable. All the above work shall be executed as per tender scope of work and user requirements for specified Plinth area (Floor to Floor Height 3.15 meter), detailed Design Basis Reports (DBR’s), Technical Specifications, Tender Drawings and conditions elaborated in this tender document and CPWD Standards on EPC mode (Turnkey Basis). ( Tentative plinth area =14,688 sqm) |
| 3 | Centralized Administrative & HRD Complex and Project Office BuildingDesign, Engineering, Procurement, Construction, Testing, Commissioning and Handing over of minimum 3 star GRIHA or equivalent rated Centralized Administrative & HRD Complex (S+4) and Project Office Building(S+3)in RCC Framed Earthquake Resistant Structure including vetting from IIT/NIT, including OverheadTankandUnderground Sump, pump with pump houseasperthe capacity required , Covered Structural shed for parking, Canteen (G), Workshop Building(G), external elevation/facade work as per building 3D views enclosed with the tender including cladding materials and structural Glazing work,facade, area lighting, external& internal electricalworks, Civil External service connection, external& internalplumbingworks, internal water supply and sanitary installations, False Ceiling, CCTV, Lifts as per PJS, Fire ProtectionSystem, landscaping, boundary wall with gates,externaldevelopment, siteLeveling, internal Road &Pathways, Sewer,Water Supply, StormWaterDrains, Horticulture, StreetLighting,Extension of Electric/Water Lines from source of Local bodies / existing facilities to desiredplace,Rising Mains/Bus Duct, DG set, UPS, HVAC, HT & LT Sub station, Fire detection & alarm system, STP, Rainwater Harvesting, Water proofing treatment, Antitermite treatment, Solar Photo Voltaic Power Generation System, IBMS,Emergency light & illuminated signages, LAN, IP based EPABX System, etc. so as to make the building completely functional including obtaining all statutory approvals, GRIHA Approvals as applicable during construction & Post construction as applicable. All the above work shall be executed as per tender scope of work and user requirements for specified Plinth area (Floor to Floor Height 3.9 meter), detailed Design Basis Reports (DBR’s), Technical Specifications, Tender Drawings and conditions elaborated in this tender document and CPWD Standards on EPC mode (Turnkey Basis). ( Tentative plinth area = 21792 sqm) |
| 4 | Notes 1. Payment shall be made on built-up area of the buildings only and cost of all the services, overhead water tanks and other ancillary works as per scope of work are deemed to be included therein for which nothing extra shall be payable. Bidder\"s scope also includes preparation and submission of 3D views as per direction of MECON/Client without any cost implication to client.2. Built-up Area of Buildings are tentative only which have been worked out based on conceptual Architectural Drawings and there may be changes in built-up area (marked in conceptual Architectural drawings) to meet functional requirements or otherwise while “Good for Construction” Drawings are prepared by the EPC Contractor. In case of reduction in built-up area, proportionate amount shall be recovered. For variation to the extent of (+) 0.5% in area (For all building mentioned above with specified Built-up area) during detailed engineering, no additional amount shall bepayable. Any additional amount shall be considered on account of variation in area beyond +0.5%. 3. For calculation of Built-up Area, rules for working out the Built-up area from plans as given in annexure II of DPAR-2023 and IS 3861-2002 shall be followed.4. Whereever there is a conflict in the above specified documents/drawings/codes/specification, the specification/drawing meeting desired green building requirement (GRIHA-3 STAR RATING) shall be followed and shall be provided without any addtional cost implication. In case of any other conflict most stringent condition as per directions of PMC shall be followed without any price implication. Decision of PMC in this regard shall be final & binding. |
