|
| 1 | Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. YEIDA SOR-24410 SP-62, 12mtr. (Approx. wt. 264kg.) |
| 2 | S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-30 |
| 3 | Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-52 |
| 4 | Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect. UPPWD/2018 PS-634 |
| 5 | Supply and burying of 600mmX600mmX6.0mm GI plate, vertically for earthing with its top atleast 3 mtr. Below ground level complete with 20mm dia GI pipe & funnel for watering and one earthing lead of one no.8 to 10 SWG GI wire in15mm dia G.I pipe and G.I wire up toswitch board ( from approm to switch board the cost of G.I pipe and G.I wire will be Extra) 30cm suuare C.l frame with hinged cover masonry housing alternate layers ofcharcoal/coke & salt atleast 150 mm thick all-around etc. as per direction of Engineer-incharge complete in all respects as per drawing (this will apply for earthing of poles also). UPPWD/2018 PS-702 |
| 6 | S/L of 32mmX6mm GIstrip from earth electrode directly in the ground as required complete in all respect. UPPWD/2018 PS-717 |
| 7 | S/F of 11 KV TPMO set of ‘Relco’ make or equivalent with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge YEIDA SOR-56 |
| 8 | S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge YEIDA SOR-57 |
| 9 | Supply, Sagging, tensioning, jointing and bending of suitable size ACSR conductor conferming to I.S. specification including cost of aluminium wire and jointing sleeve required. The rates includes cost of material, labour, T&P etc. required for proper completion of work as per the directions of the Engineer-in-charge. PWD-2018 P.S.-627Rabbitconductor. |
| 10 | Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 75 watt to 90 Watt. Confirming to IP 66protection complete in all respect (Make Philips, Crompton, Bajaj,) complete in all respect, as directed by Engineer in chargeUPPWD-2018 PS-1423 Cat-AAA |
| 11 | S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-35 |
| 12 | Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc.make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells , KEI Make & for small works upto value of cable for Rs. 25.00 Lacs Klinga, Suraj, Delton, Grandley & Polycab make can be used as per the directions of the Engineer-in-charge YEIDA SOR-1 3CX2.5 Sqmm |
| 13 | Supply, delivery, assembly, installation, testing and commissioning of Outdoor type distribution transformer. 11/0.433 KV, 3 Phase, Double wound winding. Voltage ratio 11000/433-250 Volts, vector group Dyn 11. Air cooled with manually operated +5% and +10% off load Tap changer and complete with standard fitting & accessories as given in the specification and also confirming tolatest IS amendments : 1180 (LEVEL-1)with first filling of the oil complete as required. (This includes oil testing for dielectric strength, flash over test and filtration of transformer oil to be conducted in the event of unsatisfactory results of oil testing. (Kanohar Electrical, Vijay Electrical, Voltamp, Diamond, NGEF, Crompton, Alstom, BHEL, Raychem, make). YEIDA SOR-83 400 KVA Copper wound |
| 14 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per irections of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. UPPWD -2018 PS-811 |
| 15 | Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI (Mumbai/Nasik), Fort Gloster (Kolkata), Asian (Thane/Silvasa), Universal (Satna), Nicco (Kolkata/Baripara), ICL (Rajpura), Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect as per the directions of the Engineer-in-chargePWD-2018/PS No-5013.5Cx300 sqm. |
| 16 | S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge.PWD-2018/PS No-504300 sqm. |
| 17 | S/F of G.I Pipe 150MM dia \"B\" class Zindal/tata make including required material T&P etc. Complete in all respect, as directed by Engineer in charge. As per the directions of the Engineer-in-charge. YEIDA SOR-65 |
| 18 | S/F of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-78 |
| 19 | Supply andfixing dangerboardfabricated from10gaugeM.S. Sheet as per I.E. Rules.UPPWD/2018 PS-1109 |
