|
| 1 | Supply and installation of PVC Casing-n-Capping/PVC conduit system including all required accessories and material required for installation. |
| 2 | 20 mm PVC Casing-n-caping/conduit. |
| 3 | 25 mm PVC Casing-n-caping/conduit. |
| 4 | Cable management system: Supply and Installation of PVC cable management system including all accessories required for installation. |
| 5 | 100x50 mm PVC body with cover. |
| 6 | 50x50 mm PVC body with cover. |
| 7 | ERW MS Conduit: Supply and installation of ERW MS concealed/open conduit system with all accessories and materials required for fixing and installation. |
| 8 | 20 mm conduit. |
| 9 | 25 mm conduit. |
| 10 | Supply, installation, termination, testing and commissioning of FRLSFlexible copper/ telephone/ CAT-6 wire/cable. |
| 11 | 1.0 Sq. mm FRLSFlexible copper wire. |
| 12 | 1.5 Sq. mm FRLSFlexible copper wire. |
| 13 | 2.5 Sq. mm FRLSFlexible copper wire. |
| 14 | 4 Sq. mm FRLSFlexible copper wire. |
| 15 | 6 Sq. mm FRLSFlexible copper wire. |
| 16 | Supply, pullingand termination of 2 pair, 0.5ATC telephone Wire/cable. |
| 17 | Supply, pullingand termination of 4 pairs unshieded twisted pair CAT-6 UTP cable including required hardwares. |
| 18 | Supply, installation, testingand commissioning of variousMCB\"s/ RCBO\"s. |
| 19 | Supply, installation, testingand commissioning of Single Pole MCB\"s: Rating of MCB 6 Amp. to 32Amp. C-curve, Ics-10 kA. |
| 20 | Supply, installation, testingand commissioning of double Pole MCB\"s: Rating of MCB 6 Amp. to 32Amp. C-curve, Ics-10 kA. |
| 21 | Supply, installation, testingand commissioning of tripple Pole MCB\"s:Rating of MCB 6 Amp. to 32Amp. C-curve, Ics-10 kA. |
| 22 | Supply, installation, testingand commissioning of four Pole MCB\"s:Rating of MCB 6 Amp. to 32Amp. C-curve, Ics-10kA. |
| 23 | Supply, installation, testingand commissioning of four Pole MCB\"s:(Rating of MCB 40 Amp. to 63 Amp.C-curve,Ics-10kA). |
| 24 | Supply,installation, testingand commissioning of double Pole RCBO\"s: Rating ofRCBO240 volt, 10 Amp., AC 30 mA, Ics-10 kA). |
| 25 | Supply, installation, testingand commissioning of double Pole RCBO\"s: Rating of RCBO 240 volt, 16 Amp. to 25 Amp., AC 30 mA, Ics-10kA. |
| 26 | Supply, installation, testingand commissioning of four Pole RCBO\"s: Rating of RCBO 415 volt, 16 Amp. to 25 Amp., AC 30 mA, Ics-10kA. |
| 27 | Supply, installation ,testing and commissioning of ready made Metal enclosure.This is only M.S. sheet steel enclosure with copper links and wiring etc. |
| 28 | Suitable for one SP MCB |
| 29 | Suitable for one DP/TP/FP MCB. |
| 30 | Only installation of Bulk head luminaire/LED luminaires etc. upto 7 mtr height. |
| 31 | Only installation, testing and commissioning ready-made metal boards/extension switch boards etc. |
| 32 | Supply and installtion of three point ceiling rose/round block/square block. |
| 33 | Supply and Installation of Batten/Angle Holders. |
| 34 | Up keeping of LT electrical systems as per tender specifications. |
| 35 | Maintenance and replacement of Geyser / Geyser components viz. heating element, thermostat etc. in 2 kW / 3kW storage/Instant typegeysers. |
| 36 | Dismantaling of 4 X 20W flouroscent lamp luminaire or 2x36/1x36W fluorescent lamp luminaire or 2x11W CFL luminaire or 2x18W CFL luminaire or 2x36W CFL luminaire /HPSV /HPMV/ MH luminaire/Bulk head luminaire (upto 7 mtr height) from existing installation. |
| 37 | Repairing / Replacementof LED luminaire driver & PCB. |
| 38 | Repairing LED luminaire upto 10 Watt, 230 volt including repalcement of driver/PCB. |
| 39 | Replacement of LED driver from 11 watt to 35 watt in exiting luminaire. |
| 40 | Replacement of LED driver from 36 watt to 40 watt in exiting luminaire. |
| 41 | Replacement of LED driver from 41 watt to 80 watt in exiting luminaire. |
| 42 | Replacement of LED driver from 81 watt to 120 watt in exiting luminaire. |
| 43 | Replacement of LED driver from 121 watt to 160 watt in exiting luminaire. |
| 44 | Replacement of PCB / LEDs fitted with 11 watt to 35 watt. |
| 45 | Replacement of PCB / LEDs fitted with 36 watt to 40 watt. |
| 46 | Replacement of PCB / LEDs fitted with 41 watt to 80 watt. |
| 47 | Replacement of PCB / LEDs fitted with 81 watt to 120 watt. |
| 48 | Replacement of PCB / LEDs fitted with 121 watt to 160 watt. |
| 49 | Dismantaling of old wiring and acessories viz. conduits/ casing-n-capings/ducts/Cable management system/cable tray and all type of wires/cables etc. from existing installation (on walls/ roof /ceilings) and stored within 5 km radious at designated place as directed by Engineer In-Charge. |
| 50 | Dismantaling of Panels/DBs/Switch boards/ Enclosures |
| 51 | Dismantaling ofSwitch boards/AC Point/MCB/SFU / associated enclosures etc. from walls from existing installation and to be stored within 5 km radious area at designated place as directed by Engineer In-Charge. |
| 52 | Panel/DBs of size up to 0.5x0.5x0.3 mtr. |
| 53 | Panel of size more than 0.5x0.5x0.3 mtr. to less than 1.0x1.0x0.3 mtr. Size |
| 54 | Panel of size more than 1.1 x 1.1 x 0.3 mtr to less than 2.0x2.0x0.4 Mtr |
| 55 | Panel of size more than 2.1 x 2.1 x 0.4 Mtr to less than 4.0x4.0x0.5 Mtr |
| 56 | Supply, installation, testingand commissioningofready made (prefabricated) VTPN MCB/MCCB DB with protective metal door (IP-42/43) Suitable for MCB/MCCB Incomer: |
| 57 | Supply, installation, testing and commissioningof IP 43, 4 way vertical TPN DB with metal door fitted with100 A, Ics 10 kAMCB.The feeders configuration shall be as under.Incoming :-100 A, Ics 10 kATP MCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 6 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs - 02 Nos |
| 58 | Supply, installation, testing and commissioningof IP 43, 8 way vertical TPN DB with metal door fitted with100 A, Ics 10 kAMCB.The feeders configuration shall be as under.Incoming :-100 A, Ics 10 kATP MCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 12 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs - 04 Nos |
| 59 | Supply,installation, testing and commissioningof IP 43, 8 way vertical TPN DB with metal door fitted withDPX 160 A,Ics≥25 kA with electronic release MCCB.The feeders configuration shall be as under.Incoming :- DPX 160 A, Ics≥25 kA with electronic release FP MCCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 18 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs- 02 Nos |
| 60 | Supply, installation, testing and commissioningof IP 43, 8 way vertical TPN DB with metal door fitted withDPX 250 A,Ics≥25 kA with electronic release MCCB.The feeders configuration shall be as under.Incoming :- DPX 250 A, Ics≥25 kA with electronic release FP/TP MCCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 18 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs- 02 Nos |
| 61 | Supply, installation, testing and commissioningof IP 43, 12 way vertical TPN /FPN DB with metal door fitted withDPX 160 A,Ics≥25 kA with electronic release MCCB.The feeders configuration shall be as under.Incoming :- DPX 160 A, Ics≥25 kA with electronic release FP /TP MCCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 18 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs- 04 Nos |
| 62 | Supply,installation, testing and commissioningof IP 43, 12 way vertical TPN / FPN DB with metal door fitted withDPX 250 A,Ics≥25 kA with electronic release MCCB.The feeders configuration shall be as under.Incoming :- DPX 250 A, Ics≥25 kA with electronic release TP /FP MCCB.Outgoing :- (i) C-6/10/16/20/25/32A,Ics-10KA Single Pole MCBs- 18 Nos(ii) C-40/50/63A,Ics-10KA Three Pole MCBs- 04 Nos |
| 63 | Supply, installation, testing & commissioning of ready made SPN DB\"S -12 ways having IP-42/43 and protecting metal door without MCB\"s |
| 64 | Supply, installation, testing & commissioning of ready made SPN DB\"S -8 ways having IP-42/43 and protecting metal door without MCB\"s |
| 65 | Supply, fabrication (by using CR sheet steel) and installation of sheet steel bus duct, cable trays, panel and MS boxes with complete chemical and mechanical process on MS sheet or angle etc.powder coated,rubber gasket,locking arrangement,earthing bolt etc. will be provided on the fabricated item as per requirement and specifications. |
| 66 | Structural steel work made of required MS channels, I sections, flats,angles, and tees.etc at all levels including supply, cutting, fabricating, welding, surface finshing including necessary scaffolding erecting & fixing in position alongwith two coats of painting with double coat of approved primer. |
| 67 | Replacement of various types of lamps/ballasts/starters/holders etc. from existinginstallation above 3 mtr. height in 9-36 watt CFL/18-40 watt tube light fixture. |
| 68 | Power Cabling on Wall and trench : Only installation, testing and commissioning of heavy duty power cable/control cable 1100 volt grade upto 3/3½/4core x 25 /35 sqmm. XLPE/PVC insulation aluminium conductor steel armoured. |
| 69 | Supply, installation, testing and commissioning of end joints/termination of power cable by using nickel plated brass double compression gland. |
| 70 | 4 corex 10 sq mm |
| 71 | 4 corex 16 sq mm |
| 72 | 4 corex 25 sq mm |
| 73 | Supply and installation of Switches/sockets/fan regulators, door bells/bell push switches and other accessories in existing switch boards. |
| 74 | 6 Amp. 250 Volts one way switches. |
| 75 | 6 Amp. 250 Volts5 Pin sockets |
| 76 | 16/20 Amp.250 Volts one way switches. |
| 77 | 16/20 Amp.250 Volts 6 PIN Sockets/Universal Power Point |
| 78 | Step type electronic fan regulators for energy efficient fan (two module) |
| 79 | Bell push Switch 6A, 250V. |
| 80 | Supply,installation,testing & commissioning of Door Bells. |
| 81 | Power outlets/Switch Boards :Supply,Installation,testing and commissioning of following modular type switch, socket, RJ-11/RJ-45 sockets with plate and box etc. Including all acceessories and interconnection of them. |
| 82 | 6ASPT modular Switch. |
| 83 | 16/20ASPT modularSwitch. |
| 84 | 6ASPT modularSocket. |
| 85 | 16A5 pin modular Socket. |
| 86 | RJ-11 telephone sockets. |
| 87 | RJ-45 network (CAT-6) sockets. |
| 88 | Supply and installation of ISI mark Hylem sheet including cutting of switches/sockete/fan regulators as directed. |
| 89 | Luminaire: Supply, Installation, testing and commissioning/Replacement of following LED luminaires and complete with elctronic ballasts,lamps and all accessories with required fixing material or down rod or reinforced PVC pipe (if required). |
| 90 | LED bulk head 10W luminaire, having Lumen out put ≥ 600 Lumens, Colour temperature- Cool white, IP- 66, Housing- High pressure die cast aluminium, IK - 09, Cover- UV stablized polycarbonate front diffuser, THD- ≤ 10%at full load and Power factor- ≥ 0.90 and as per detail specifications. Removal of existing luminaire with all accessories and storing within RRCAT campus is in the scope of item. |
| 91 | Surface mounted 10 to 13 watt LED integral luminairewith driver in one compact housing. Luminaire should have nominal efficacy ≥ 120 lm/watt, nominal output as 1500 lumen, Colour temperature : 5700K, CRI ≥ 80, IP:65, THDi: < 10% at full load,2.5 kV surge protection minimum, Optics: exposed lens optics policarbonate, Life Class: L70 @ 50K hrs. & complete with all accessories and driver etc. Removal of existing luminaire with all accessories. and stored in within RRCAT campus. |
| 92 | 30 watt, 2X2feet LED integral recess mounted with driver in one compact housing. Luminaire should have nominal efficacy ≥ 100 lm/watt, nominal output as 3000 lumen, Colour temperature : 6500K, CRI ≥ 80, THDi: < 10% at full load,2.5 kV surge protection minimum, Optics: exposed lens optics policarbonate, Life Class: L70B50 @ 40K hrs. & complete with all accessories and driver etc. Removal of existing luminair with all accessories and storing within RRCAT campus is also in the scope of this item. |
| 93 | Recess mounted LED type downlighter meeting the following specifications:Luminous flux : 1500 lm +/- 10% , Efficacy(min) : 100 lm/W, Colour tempreture: 6500K,pf: 0.9(min) , THD : less than 10%,CRI: >80 , Optics: High quality diffuser. Removal of existing luminair with all accessories and storing within RRCAT campus is in the scope of item. |
| 94 | Supply and replacement of36 watt conventional fluorencent lamp with LED tube lightincluding modification in wiring. Lumen output ≥ 2100, CRI ≥80, Efficacy ≥100 lumen/wattminimum, CCT- 6500K and as per detail specifications. Removal of existing lamp andaccessories shall be stored within RRCAT campus. |
| 95 | Supply and installationof GI strip/ bare wire of required size under ground at a depth of 600mm from FGL including excavation, black bitumin painting, backfilling and consolidation og soil. Installation of GI strip along cable tray/wall using GI clamps at interval of 500mm as per site requirement including required hardware as per tender specifications. |
| 96 | G.I Cable Trays:- Supply and installation of 300mm wide,75mm side channel.ladder type GI cable tray, made out of 2mm MS sheet with rungs 35X15X15 mm with CC spacing of 250mm with coupler plates, prefabricated GI cover on tray, including other required hardware on existing MS support. |
| 97 | Preventive maintenance of LT Panels at RRCAT, Indore. |
| 98 | Details of LT Panel: Incomer: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No.Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/EE (Mpact) /ABB. Outgoing- a) TP/FP MCCBs up to 800A - 10 NosMake of MCCBs: Schneider Electric/ABB/Legrand/GE/L&T |
| 99 | Details of LT Panel: Incomer-I: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No. Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/ EE(Mpact)/ABB.Incomer-II: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01NoPole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/ EE(Mpact)/ABB.Buscoupler: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact)/L&T/EE(Mpact)/ABB.Outgoing- a) TP/FP MCCBs upto 800A - 10 NosMake of MCCBs: Schneider Electric/ABB/Legrand/GE/L&T |
| 100 | Details of LT Panel: Incomer: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No.Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/EE (Mpact) /ABB. Outgoing- a) TP/FP MCCBs up to 800A - 20 NosMake of MCCBs: Schneider Electric/ABB/Legrand/GE/L&T |
| 101 | Details of LT Panel: Incomer: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No.Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/EE (Mpact) /ABB. Outgoing- a) TP/FP MCCBs up to 800A - 30 NosMake of MCCBs: Schneider Electric/ABB/Legrand/GE/L&T |
| 102 | Details of LT Panel: Incomer: Current rating of Air Circuit Breaker (ACB) up to 2000A, - 01No.Pole- 3/4, 415 Voltage, Ics≥ 50kA, fitted with electronic release, Make- Schneider Electric (Masterpact) /L&T/EE (Mpact) /ABB. Outgoing- a) TP/FP MCCBs up to 800A - 40 NosMake of MCCBs: Schneider Electric/ABB/Legrand/GE/L&T |
