|
| 1 | Excavation in foundation trenches etc. earth work in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., according to the HP.PWD. specification 1990 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) in foundation and plinth including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 3 | Providing and laying up to floor two level cement concrete 1:2:4 (1cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) in string courses coping bed plates, anchor blocks plainwindow sills and the likeincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 4 | Half brick masonry in 2nd (second) class common brunt clay building bricks in cement mortar 1:4 (1cement:4sand) in superstructureUp to floor all levels including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 5 | Providing woodwork in frames ofdoors, windows, clerestory , windows and otherframes wrought, framed and fixed in position.2nd class deodar wood including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 6 | Providing and fixing 19mm thick termite resistant water proof commercial board box including shelves and shutters, the back side of cup board/cabinet of 8mm thick ply and cut portions of shelves shall be finished with 6mm hard board edging. The cut portion of shutters from all the sides shall be finished with 12mm thick hard wood edging. The shutters from outside shall be finished with 1mm thick laminated of approved shade including piano hinges and magnetic catcher with all accessories complete. and as per direction of Engineer-in-Charge. |
| 7 | Providing and fixing 1.00mm (one point zero millimeter) thick colored or plain lamination sheet (sun mica) on boards/ply wood sheets with approved adhesive and nails etc. completeincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 8 | Providing and fixing aluminum tower bolts (barrel type) anodized trans parent or dyed to required shade and color with screws etc. complete. 150x10mm (one hundred fifty into ten millimeter) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 9 | Providing and fixing aluminum handles anodized transparent or dyed to required color & shade with necessary screws 100 mm (one hundred millimeter) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing bright finished brass ball catcher 10 mm (ten millimeter) dia including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 11 | Providing and laying rectified Glazed Ceramic floor tiles (AGL, NITCO, Kazaria of approved shade and sample or it\"s equivalent) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colors, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any sizeas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.and as per direction of Engineer-in-Charge. |
| 13 | Providing and laying Mirror polished Kota stone slab flooring of size 55x55 cm (fifty five into fifty five centimeter). 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete 25 mm (twenty five millimeter) thick including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 14 | Providing and laying Kota stone slab (mirror polished) 25 mm (twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 15 | Providing and laying 60mm (Sixty millimeter) thick heavy duty precast cement concrete inter locking paver blocks vibrio compacted up to M-30 grade laid over compacted sand layer having thickness of 50mm of required grading complete (including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 16 | Providing and fixing on wall face 100mm (one hundred fifty millimeter) dia pipesPVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/Sqm including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 17 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. PVC Plain bend 110mm (one hundred fifty millimeter) dia including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 18 | PVCshoe 110mm (one hundred fifty millimeter) dia including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 19 | Providing and fixing150mm (one hundred fifty millimeter) dia m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10 x10x10 cm (ten into ten into ten centimeter) of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing M.S. BP Sheet2mm (two millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 21 | Providing and fixing 30 cm. wide 30cm boxtype with GI Sheet. gutter with iron brackets 40x3mm (forty into three millimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design.including carriage of materialthrough all mode of transpiration within all leads and lifts and as per HP.PWD., specification of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 22 | Applying priming coat With ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chrome. Over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 23 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops,dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge |
| 24 | Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equalized on undecorated wall surfaces(two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 25 | 6mm (Six millimeter) thick cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) up to all floor level including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in- charge. |
| 26 | 15mm (fifteen millimeter) cementthick plaster in singlecoat on fair side of brickmasonry/stone masonry/concrete walls for interior plastering up to floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge |
| 27 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to givean even shade :Old work (one or more coats) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 28 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 29 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes (KITEC or it\"s equivalent conforming to IS - 1545004), U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.1216 (16 mm OD) pipe |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 31 | Providing and fixing white vitreous China pedestal type water closet (European type W.C.No. 92047(ELBA)(S-30),69x37x71 of approved shade of HINDWARE or it\"s equivalent) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 33 | Providing and fixing white vitreous China pedestal(Pedestal No. 11003, Size 55x40x82 cm of approved shade of HINDWARE or it\"s equivalent) for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 35 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 36 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 37 | Providing and fixing toilet paper holder : C.P. brass including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 38 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and color, weighing not less than 105 gms including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 39 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 40 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 41 | Providing and fixing wash basin( Wash No. 10087(MARIO)of approved shade of HINDWARE or it\"s equivalent) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 42 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 43 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 44 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 45 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 46 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.flexiblepipe32 mm dia including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 48 | Providing and fixing vitreous China Flat back type of size 430mm x260mm x 350mm (four hundred thirty into two hundred sixty into three hundred fifty millimeter) bowl pattern Urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately. Including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 49 | Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous China flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 50 | Providing and fixing32mm(Thirty two millimeter)nominal bore C.P. Brass flush pipe /spreaders for urinal with fittings such as unions ,clamps etc. (all in C.P. Brass) including cutting holes and making good the same. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge |
| 51 | Providing and fixing PVCConnection with Brass unions 300/450mm (three hundred/four hundred fifty millimeter) length(ii) 20mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 52 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 54 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
