|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | ALL KINDS OF SOIL |
| 3 | CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 40 MM MAXIMUM SIZE OF STONE AGGREGATE |
| 4 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 5 | \"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE.\" |
| 6 | BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN |
| 7 | MOORUM/HARD COPRA |
| 8 | \"FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE |
| 9 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 10 | \"COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS.\" |
| 11 | \"REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES, |
| 12 | \"SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM.\" |
| 13 | THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) |
| 14 | BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN |
| 15 | 1:6 (1 CEMENT: 6 SAND) |
| 16 | 1:6 (1 CEMENT: 6 SAND) |
| 17 | 1:3 (1 CEMENT: 3 FINE SAND) |
| 18 | PROVIDING AND APPLYING PLASTER OF PARIS PUTTY OF 2 MM THICKNESS OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND S |
| 19 | TWO OR MORE COATS ON WALLS APPLIED @ 1.25 LTR/10 SQM. OVER AND INCLUDING ONE COAT OF SPECIAL PRIMER APPLIED |
| 20 | \"PROVIDING AND LAYING VITRIFIED FLOOR TILES MULTI/DOBULE CHARGED (MINIMUM TOP LAYER THICKNESS 2.0MM) NENO POLISHED SELF |
| 21 | 35 MM THICK INCLUDING ISI MARKED STAINLESS STEEL BUTT HINGES WITH NECESSARY SCREWS. |
| 22 | \"30 MM THICK INCLUDING ISI MARKED STAINLESS STEEL BUTT HINGES WITHNECESSARY SCREWS\" |
| 23 | SAL WOOD |
| 24 | WITH FLOAT GLASS PANES OF 4.0 MM THICKNESS |
| 25 | WITH 12 MM MILD STEEL U BEADING. |
| 26 | \"ANODISED ALUMINIUM(ANODISED TRANSPARENT OR DYED TO REQUIRED SHADE ACCORDING TO IS:1868,MINIMUM ANOD |
| 27 | \"PROVIDING AND FIXING IST QUALITY CERAMIC GLAZED WALL TILES CONFORMING TO IS: 15622 (6 TO 7MM THICK) OF APPROVED MAKE I |
| 28 | \"PROVIDING AND LAYING CERAMIC GLAZED FLOOR TILES 300X300MM OR MORE (6 TO 7 MM THICK) OF 1ST QUALITY CONFORMING TO IS : 1 |
| 29 | SANITORY WORK+OTHERS |
| 30 | DEDUCT FOR DISPOSED SOIL NOT LEVELLED AND NEATLY DRESSED (AGAINST ITEM NO. 2.6) |
