Tender For Extention Of Bibipur-Bellauli Bundh On Right Bank Of River Saryu In District Mau Lot 17 - Earth work in fillingby mechanical excavator0.90cum & power transport for a lead of upto 3 km including excavation loading unloading stacking machenical compaction and dressing including all lift etc including all labour, T&P, all taxes but excluding of GST etc. for proper completion of work as per direction of Engineer In charge. 2 Providing and Laying of Mzp stone boulder (25 to 40 kg minimum dimension 200mm) inMechanically Woven Double Twisted Hexagonal Shaped of BIS class 2 as per IS code 16014 : 2024 of required sizes 3.00x1.00x0.45 m (1 no. diaphragm size 3x0.45 m along the gabion length and 2 No. diaphragms size 2x0.30 across the length of Gabion) Mesh Type 10.00x12.00cm polymer (PVC / PA 6) coated, Mesh Wire dia. 2.7/3.7mm (ID/OD), edged/Selvedge dia 3.4/4.4mm (ID/OD) with partitions at every 1m interval and shall have minimum 10 No. of opening per mtr. of mesh perpendicular twist tying with lacing wire of dia 2.2/3.2mm (ID/OD) of construction of slope pitching including all material, labour, T&P, carrage, loading, unloading, Royalty all taxes but excluding GST etc. and tying with lacing wire all complete as per directions of engineer-in-charge. 3 Providing and laying Geo Textile sheet 200 Gsm woven multifilament polypropylene yarn, below pitching with pegs including preparation of surface including all material, labour, T&P and all taxes but excluding of GST etc. for completion of work as per direction of Engineer - in Charge. 4 Providing and Laying of Mzp stone boulder (25 to 40 kg minimum dimension 200 mm) inslope pitching 0.225 m including all material, labour, T&P, carrage, loading, unloading, Royalty all taxes but excluding GST etc. and tying with lacing wire all complete as per directions of engineer-in-charge. 5 Dry brick on edge soling including preparation of sub grade and filling joints with local sand including cost of sand, labour, T&P, Royalty, all taxes, but excluding GST etc. for proper completion of work as per direction Engineer-in-Charge. 6 Supply and Fixing steel Flapper Regulator including cost of all materials, T&P etc required for proper completion of work. 7 Earth work excavation by Hydrolic excavator 0.9 cum bucket capacity including 1.5m lift and all labour, T&P and all taxes but excluding of GST etc. including refilling the trench and proper disposal of excess earth as per direction of Engineer-in-charge. 8 Centering and shuttering for including all cost of materials,T&Plabours and other accessories required for proper completion of work. 9 Reinforcement including carriage, cutting, bending,and placing in position including cost of binding wire,labours,T&P etc. all complete. 10 Providing & Laying P.C.C. work in 1:2:4 ( M15) coarse sandand dala grit (12.5mm to 20 mm.)for RCC Regulator including all cost of materials,T&P and labours and other accessories required for proper completion of work, excluding cost of reinforcement.In the direction of Engineer-in-charge as per drawing and I.D. specification. 11 Providing & Laying R.C.C. work in 1:1.5:3 ( M20) coarse sandand dala grit (12.5mm to 20 mm.)for RCC Regulator including all cost of materials,T&P and labours and other accessories required for proper completion of work, excluding cost of reinforcement.In the direction of Engineer-in-charge as per drawing and I.D. specification. 12 Providing & Laying R.C.C. work in 1:1:2 ( M25) coarse sandand dala grit (12.5mm to 20mm.)for RCC Regulator including all cost of materials,T&P and labours and other accessories required for proper completion of work, excluding cost of reinforcement.In the direction of Engineer-in-charge as per drawing and I.D. specification. 13 Supplying and laying PVC Pipe in abutment and wing wall 75 mm dia including material, labour,T&Petc. complete work directed by Engineer-in-charge. 14 Supply and Fixing of Steel gate includingcost of allmaterial, labour,T&Petc
