|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed |
| 2 | S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed |
| 3 | S&F Machine cut kota stone slab 10-15mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing as in skirting/steps complete all as specifed and directed. |
| 4 | M&L forglazed ceramic tiles coloured size (600x300x7 / 450 x 300 x 7) mm thickas on vertical surfaces, of walls as in skirting, dado etcset and jointed in neat cement slurry & pointed with colouredcement to match complete all as specified and directed (Note: sample/size will be approved by GE) |
| 5 | M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed |
| 6 | M&L for rendering 10mm thick in CM 1:4as in backing coat plasteron surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed |
| 7 | Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) orinsulation boards any thickness including cover fillets and framework complete all as specified & directed. |
| 8 | S&F interlocking GI powder coatedsnap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm .Aluminium alloy extruded section shall be ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737,and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement pre-painted building board 4mm thick of make E board classic of M/s Everest/ Vishakha industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”(Note: Ceiling board texture will be diamond shape or directed by Engineer-in- Charge). |
| 9 | Taking down and refixing of old GI false ceiling framework with including refixing of old ceiling boards and providing and fixing with Hangers of new4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made complete all as specified and directed. |
| 10 | S&F in repair non asbestos cement pre-painted building board600x600x4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”complete all as specified and directed. |
| 11 | M&L for complete removal of existing wall surfacesand applying two coats of Acrylic weather proofexterior paint over water based primer including prepare of surface complete all as specified and directed |
| 12 | Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqmbut n exc 4 sqm each. |
| 13 | Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site |
| 14 | S&F aluminium anodised powder coated (min thickness 50 microns)frame for doors, windows, ventilators, complete all as specifed and directed |
| 15 | S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including suitable prelaminated particle board fix in half portion of door shuttercomplete all as specifed and directed. |
| 16 | S&F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubberpacking, anodised aluminium snap beading, screws etccomplete all as specifed and directed. |
| 17 | S&F Sheet glass ordinary quality 4.00 mm thickexc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed. |
| 18 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixedin aluminium windows, wooden doors etc complete all as specified. |
| 19 | S&F aluminium extruded section body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed. |
| 20 | Supply & Fixingstainless steelcurtain railsof 25mm dia metre stops, rollers etc all as specified and directed. |
| 21 | Supply & Fixingstainless steelbrackets for curtain rod of 25mm dia metre with fancy knob stops, hooks etc all as specified and directed. |
| 22 | M&L for granite (of any type) work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite. |
| 23 | Supplying and Fixing ‘APHONY FIBRETTE ‘ tiles made of Wood Fibre 1mm width cement composites 15mm thick(Non Magnesite bonded) with two coat of oil bound distemper with primer colours as per the choice of the Engr in charge of size 595x1195 mm . Has excellent noise absorption of 1 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTMD-876 and Fire Class -1 as per BS 476 part 5 and 6,Class P-not easily ignitable as per BS-476-Part 5 (Ignitability for material).This is applicable for core and class 1 as per BS 476-Part 7 (Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal Conditivity result 45 w/m2/K as per IS:3346-1980with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint. Can be installed on T24 grid system of 0.6mm thick Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and for wall panelling long life with a backing of HIMALYAN ACOUSTICS 50mm 1000 GSM thick absorb wool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 thermal conductivity test , W/mk , as per ASTM C 518 test result ( SC-6490) -0.03312 for excellent results.NOTE:Work Executed by OEM under the Provision of MOUMake : Himalyan Acoustic,Kanuf, Baux. |
| 24 | M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed |
| 25 | M&L for preparation of old painted surfaces of any descriptionby complete removal of existing treatment and applying three coats of white wash on undecorated surfaces of stone walls complete all as specified and directed. |
| 26 | M&L for preparation of new wall surfaces of any descriptionand applying three coats of white wash on undecorated surfaces of stone walls complete all as specified and directed. |
| 27 | M&L for Complete removal of existing treatment and applying 3 mm thick wall care putty incl primer coat as prepratory to distemper and applying two coatsof oil bound emulsion white or tinted on walls. |
| 28 | M&L for complete removal of existing wall surfacesand applying two coats of Acrylic weather proofexterior paint over water based primer including prepare of surface complete all as specified and directed. |
| 29 | Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets, main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed. |
| 30 | M&L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way switch.Note:-Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 31 | All as per ser item No. 30.00 herein before but with One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 32 | All as per ser item No. 30.00 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes. |
| 33 | All as per ser item No. 30.00 herein before but on independent board. |
| 34 | Supply and fixing in replacement of switch modular type 6 Amps one way, 1 module,AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed. |
| 35 | Supply and fixing in replacement of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. |
| 36 | Supply and fixing in replacement of switch modular type 16 Amps one way, 1 module,AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed. |
| 37 | Supply and fixing in replacement of modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. |
| 38 | Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 39 | Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. |
| 40 | Supply and fixing in replacement of modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2module, laser marking complete all as specified and directed. . |
| 41 | Supply and fixing in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 42 | M&L for safely disconnecting of existing LED panel light fittings and kept aside for re-fixing after completion of B/R nature ceiling work complete all as specified and directed by Engineer in Charge. |
| 43 | Supply and fixing in replacement of 30 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of PDC housing with IP 66 and inbuilt battery back-up for 4-6 hours complete includingfixing arrangement in existing pipe and connecting up with 2/3 core flexible coppper conductor cable and all as specified by Engr-in-Charge. |
| 44 | Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. |
| 45 | Supply and fixing in replacement of LED round shape 15 watt 220 volts AC recessed/ surface mounted type with high efficacy PMMA diffuser soft glare free light complete with drivers, battery backup, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 46 | Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP)complete all as specified. |
| 47 | Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty concealed conduit including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. |
| 48 | Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty conduit including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. |
| 49 | Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed. |
| 50 | Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed. |
| 51 | Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. Make - Hager CP No VYS08D or Legrand/ ABB/ Indo Asian. |
| 52 | Supply and fixing in replacement 4 Pole MCCB 63 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 15 KA. |
| 53 | Supply and fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA. |
| 54 | Supply and fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA. |
| 55 | M&L for replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. |
| 56 | NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 17,857.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. |
