|
| 1 | Earth work in filling in ordinary soll by carted earth beyond 5.00 Km. extra lead from site (as per analysis) |
| 2 | Excavation in foundation in ordnary soil including lift upto 30M and including filling watering (S.No. 251)) |
| 3 | Cement Concrete with 4 cm. gauge brick ballast, fine sand of 1:25 R.M. anad cement in proportion of 8:4:1 in foundation and under floors Tools & plants etc. required for proper completion of the work.(Sl. 275) |
| 4 | M-150 Brick work in one cement & four coarse sand (1:4) mortar in foundation and plinthincluding supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. SI. No. 305A |
| 5 | R.C.C. work with cement approved coarse sand & 2.0 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding supply of reinforcement and its bending. but including its fixing and binding, the same with 24 B.WG.G.I. binding wire and shuttering etc. andof all material, labour, T&P etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra (S.I.No.288) |
| 6 | R.C.C. work with cement approved coarse sand & 2.0 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending. but including its fixing and binding, the same with 24 B.WG.G.I. binding wire and shuttering etc. andof all material, labour, T&P etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra (S.I.No.289) |
| 7 | M-150 Brick work in one cement & four coarse sand (1:4) mortar in superstructureincluding supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. (SI. No. 305A+310) |
| 8 | R.C.C. work with cement approved coarse sand & 2.0 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending. but including its fixing and binding, the same with 24 B.WG.G.I. binding wire and shuttering etc. andof all material, labour, T&P etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra (S.I.No.284 a) |
| 9 | M.S. (Tor steel or plain) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. (S.I.No.504) |
| 10 | M.S. or Iron work of small size and section such as holding down bolts, haold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastages etc. and their fixing but in M.S. Grills/Stair case/railing/Gates/trusher/racks etc. required for proper completion of the work. (I.S. 502A) |
| 11 | 12 mm thick plaster with cement mortar conststing of 1 part cement and 4 parts of fine sand of 1.25 fineness modulus SI.No. 584 |
| 12 | 2 Cm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work (SI.No. 597) |
| 13 | Cement concrete with 2.0cm gauge approved stone grit coarse sand and cement in the proportion of 4:2:1 on top of wall & floors etc. including supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. SI No. 279a |
| 14 | Screeding over leaky roofs with bitumen paint at 1.70 per Sqm. and without spreading of sand. Including sweeping, cleaning the roof with brushes and heating of the paint including cost ofall materials, labour T & P etc. for completion of the work S.I. No. 548. |
| 15 | P & L brick coba 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and C Sand mixed with @2% water proofing compound by weight spreadind cement slurry etc. including cost ofall materials, labour T & P etc. for completion of the work S.I. No. New Item (Chapter-11). |
| 16 | Distempering (Three coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand.including supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. SI. No. 649+650 |
| 17 | Finishing wall with water proof cement paint of approved made and quality on new work with three coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. S.I. NO. 660 +661. |
| 18 | Painting roofs or other iron work in large areas with one coat priming and two coat of approved (above one sQ, Meter) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. with every coat over previously painted surface. SI No. 644+645 |
| 19 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Including cost of all material labour T&P etc and all other taxes such as Cess, Levi, Toll tax, Royalty etc. (But excluding GST) required for proper completion of work as per direction of Engineer-in-Charge.As per MORT&H Spec. No. 401 |
| 20 | Supply and Laying of 80 mm thick interlocking tiles I shaped mechanically compressed inter loking paver blocks manufactured by high pressure and compressed interloking paver blocks manufactured by high pressure and control vibration machine having plan dimension 200* (160+120mm) with minimum 5 mm thick topping of O.P. cement mixed with 25% marble rowder. The Compressive strength of concrete paver block shall not be less than 40 Mpa and 4.50 kg per No. including cost of all materials labourl T & P etc. Also including leveling and dressing of surface up to required level and stopes filling joints with local sand.SI New Item Chp-20. |
| 21 | Supply and fixing of 10cm. (4\") internal dia PVC down pipe. Approved make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1\" x1/8\") fixed to walls with cement motar (1:2) and including supply of 15 cm (6\") long 6mm. (1/4\") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. SI No. 730a |
| 22 | Supply and fixing 6 mm. (¼\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. SI No. 628 |
| 23 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge SI No. New item 4 Ch. 14 |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan size 580x440mm) Hindware or Equivalent with 100mm sand cast Iron P or Strap, 10 litre low level white P. V.C. flushing cistern with manually controlled device (handle lever) confirming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: |
| 25 | Providing and fixing white vitreous china wash basin Hindware or Equivalent including making all onnections but excluding the cost of fittings completeas per direction Engineer-in-charge. |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per direction of Engineer-in-charge. |
| 27 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. |
| 28 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 |
| 29 | a 15 mm dia. nominal bore |
| 30 | b 20 mm dia. nominal bore |
| 31 | c 25 mm dia. nominal bore |
| 32 | 15 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. |
| 34 | (A) Supply and fixing of110 mm PVC pipe. |
| 35 | (B) Supply and fixing of90 mm PVC pipe. |
| 36 | S/F of Submerseble Pump 105 H.P with 110 mm dia borring with instalation of water strong tank etc all complete |
| 37 | S/F Wiring point for light point fan box, switch, socket, with 1 sqmm copper wire board with labour work complet |
| 38 | Estimate Cost For The Construction Of Dung Wastes Based BIO-GAS PLANT 49 M3 and Digester volume 83 m3 |
| 39 | S/F Sign Board. |
| 40 | Add gst amount |
