|
| 1 | Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed.Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as spd & directed by Engr-in charge. |
| 2 | M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed. |
| 3 | Providing & fixing false ceilingwith semi perforated 10mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm oflength 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i\"e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shapeleveladjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried outas per specifications, drawing and as per directions of the Engr-in-Charge. |
| 4 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed. |
| 5 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed. |
| 6 | M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 7 | Taking down of chowkats with shutter (without taking of shutter from frame)n exc 1.5 Sqm each complete all as specified and directed. |
| 8 | Taking down of chowkats with shutter (without taking of shutter from frame)exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed. |
| 9 | S&F of 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 10 | S&F plain 2nd class hardwood 35mm thich framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 11 | S&F for 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) completed all as specified and directed. |
| 12 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, & bottom rail, lock rail & bottom rail on either side & as gap insert for top rail & colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 13 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 14 | S&F 100mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 15 | S&F 75mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 16 | S&F 125mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 17 | S&F 100mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 18 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 19 | S&F 100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 20 | S&F 250mm long, Mild steel or stainless steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primercomplete all as specified and directed. |
| 22 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 23 | S&F for SDC Laminated flooring 8mm thick of any coloured manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base complete all as direceted by Engr-in-Charge. |
| 24 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering/wall complete all as specifed and directed. |
| 25 | M&L for 0.50mm thick CGI sheets fixed to wall/roof with two corrogations side lap, fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 26 | M&L 0.50 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 27 | M&L for two coats of synthetic enamel paint over a coat of red oxideon new steel surfaces of any description, not otherwise described over 10cm width or girth incl preparing new zinc or galvanised surfaces to receive painting by coating with mordant solution incl washing and cleaning etc completed all as specified and directed. |
| 28 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all asspecified & directed by the Engr-in-Charge. |
| 29 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, light fitting cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 30 | M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casingand cappingof 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :-(Note :The cost of MS sunken box with 3 mm thickbakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.) |
| 31 | One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch. |
| 32 | One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch. |
| 33 | One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch. |
| 34 | Description all as per Srl item No. 30.00 here-in-before but with 2.5 sq mmFRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. |
| 35 | S&F Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. |
| 36 | S&F in repalcement, of Switch Socket combination, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. |
| 37 | S&F Switch Socket Combination, 6 pin, 5/15Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. |
| 38 | S&F in replacement of Bell push, flush type 5 amps, 230 volts complete all as specified and directed. |
| 39 | S&Felectric call bell ding dong AC 230 volts Single Pole complete all as specified and directed. |
| 40 | S&F in repalcement, of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. |
| 41 | S&F LED lamp 9/10W complete all as specified and directed by the Engineer-in-Charge. |
| 42 | S&F Ceiling rose, two to three terminals, bakelite body, 230 volts complete all as specified and directed. |
| 43 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 44 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 45 | S&F wall mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 10W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. |
| 46 | Supply and fixingLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 47 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light 6500 K complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 48 | S&FLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 49 | Supply and fix in replacement exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 50 | M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC casingand cappingof 25 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates.2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit. |
| 51 | Description all as per Srl item No. 47.00 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire. |
| 52 | Description all as per Srl item No. 47.00 here-in-before but with 2 run of 10.0 sq mm FRLS copper wire with 10.0 Sqmm FRLS copper cable as earth wire. |
| 53 | S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. |
| 54 | Description all as per Srl item No. 50.00 here-in-before but SPN 12 way Distibution Board |
| 55 | Description all as per Srl item No. 50.00 here-in-before but SPN 8 way Distibution Board |
| 56 | Description all as per Srl item No. 50.00 here-in-before but SPN 4 way Distibution Board |
| 57 | S&F in replacement of MCB, C Curve type, 10 kA, 63 Amp, TPN with over load and short circuit protection complete all as directed. |
| 58 | S&F in replacement of MCB, C Curve type, 10 kA, 20 to 40 Amp, SPN with over load and short circuit protection complete all as directed. |
| 59 | S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed. |
| 60 | S&F in replacement of MCB,B Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 61 | S&F in replacement of Blanking plate of plastic, suitable for distribution board complete all as directed. |
| 62 | M&L in replacement earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed. |
| 63 | Supply and fix in replacement20W LED fittting 3000 K (warm white) decorative slim round profile LED lightning with extruded polycarbonate, environment friendly energy efficient ready to use complete all as specified and directed. |
| 64 | Supply and fix in replacement10WLED fitting 3000 K (warm white) decorative slim round profile LED lightning with extruded polycarbonate, environment friendly energy efficient ready to use complete all as specified and directed. |
| 65 | Supply and fix in replacementInverter LED fitting 20 W LED 3000 K (warm white) with square profile and polycarbonate channel withLithium Ion battery with charging time8hours-10 hours and back up time upto 4 hourscomplete all as specified and directed. |
| 66 | Supply and fix in replacementinvertor Led Bulb 9W 3000 K (warm white) of 04 hrs backupsuitable for holder all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fix in replacement LED Bulb 9W 3000 K (warm white)ofsuitable for holder including taking out old US Bulb complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply and fix in replacement LED Bulb 15 W 3000 K (warm white) ofsuitable for holder all as specified and directed by Engr-in-Charge. |
| 69 | Supply and fix in replacement12/15 w 3000 K (warm white) LED Panel Square slim LED 1 x 1,compact, aluminium die cast lit panel, recess mounted square fixing with opal diffuser with electronic drivercomplete all as specified and directed. |
| 70 | Supply and fix in replacement30/35 watt 3000 K (warm white) LED 2\" x 2\" Recessedled edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and fix in replacement LED Adore Lamp 0.5 W B22 White, green, red in color complete all as specified and directed. |
| 72 | S & F in replacement 16 Amp PVC Plug top complete all as specified and directed. |
| 73 | S & F in replacement 6 Amp PVC Plug top complete all as specified and directed. |
