Construction Of Circuit House At Sawa Co Hqr., East Kameng District., Kameng-Arunachal Pradesh

TDR : 48245849

Tender Notice
BOQ

Expired

Kameng , Arunachal Pradesh

Tender Brief : Construction Of Circuit House At Sawa Co Hqr., East Kameng District.

Document Fees
₹ 5000 /-

EMD
₹ 374320.0 /-

Tender Value
₹ 3.74 Crore /-

Submission Date
19-03-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	( SH : GROUND FLOOR)
2	Land development at site
3	Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth on the Barren Valley side.
4	Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of excavated earth on the barren valley side.
5	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
6	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
7	Filling in plinth with sand under floors including watering, ramming,consolidating and dressing complete.
8	SH :-CONCRETE WORKS.
9	Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
10	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
11	a) Foundation and Plinth
12	SH: - RCC WORKS.
13	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :
14	a) M-20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
15	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M 20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
16	Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M 20 ( 1 cement:1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
17	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
18	a) M 20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
19	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
20	b) M 20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
21	Centring and shuttering including strutting, propping etc and removal of form work for :
22	a) Foundation, footings, bases of columns etc. and mass concrete.
23	c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
24	d) Lintels, beams, girders, bressumers and cantilevers etc.
25	e) Column, pillars, posts and struts etc.
26	f) Stairs (excluding landings) except spiral stair cases.
27	Reinforcement of RCC work including bending, binding and placing in position complete.
28	a) Tar/ TMT Steel
29	SH: BRICK WORKS.
30	Brick work with best available local bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
31	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
32	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
33	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
34	SH: WOOD WORKS.
35	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
36	Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
37	a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
38	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
39	a) 38mm thick best available local wood class - B I
40	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
41	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
42	b) Ornamental grill.
43	Providing and fixing M.S. sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
44	a) 300 x 16 mm
45	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.
46	a) 300 x 10 mm
47	c) 150 x 10 mm
48	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
49	a) 125 mm
50	b) 100 mm
51	Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
52	a) Timber class - A IV
53	SH : STEEL WORK
54	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
55	SH : FLOORING
56	Providing and fixing vitrified floor tiles of approved make with water absorption less than 0.08% and conforming to IS:15622 in all shades, colours laid on 20 mm thick cement mortar1:4 i/c grouting the joints with white and matching pigment complete.[Flooring and Skirting](c) Size of Tile -1000x1000
57	White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
58	Chequered Terrazzo Tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: (a) Light shade using white cement.
59	SH : FINISHING
60	15 mm cement plaster 1 : 4 (1 cement : 3 fine sand) on the rough side of single or half brick wall.
61	12 mm cement plaster 1 : 4 (1 cement : 3 fine sand).
62	6 mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).
63	Applying one coat of distemper primer of approved brand and manufacture on wall surface.
64	Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
65	Applying one coat of cement primer of approved brand and manufacture on wall surface.
66	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
67	Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
68	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
69	Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
70	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
71	SH : MISCELLANEOUS.
72	Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
73	Providing and fixing approved local wood (Class - B I) railing 91 cm high with 38 mm x 38 mm wooden bars at 10 cm centre to centre complete with top and bottom rails 89 mm x 51 mm complete.
74	SH : DRAINAGE.
75	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
76	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
77	a) 150 mm dia SW pipes
78	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
79	a) 150 mm dia SW pipes
80	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
81	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
82	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
83	SH : WATER SUPPLY.
84	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
85	a) 15 mm nominal bore
86	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
87	a) 25 mm nominal bore
88	b) 20 mm nominal bore
89	Providing and fixing brass bib cock of approved quality.
90	a)15 mm nominal bore
91	Providing and fixing brass stop cock of approved quality.
92	a) 15 mm nominal bore
93	Providing and fixing PVC connection pipe with brass union.
94	a) 15 mm nominal bore
95	Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work.
96	a) 15 mm dia pipe
97	b) 20 mm dia pipe
98	SH :SANITARY.
99	Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
100	a) orissa patten WC Pan
101	Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.
102	a) WC pan with white plastic seat and lid.
103	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
104	b) Range of two urinals with 10 Litre CI automatic flushing cistern
105	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
106	a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
107	Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.
108	a) 250 x 130 x 30 mm
109	Providing and fixing kitchen sink including making all connection excluding cost of fittings.
110	a) White glazed fire clay sink size 600x450x150 mm
111	Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins.
112	Providing and fixing CP brass waste for wash basins and sinks.
113	b) 40 mm dia
114	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
115	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
116	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
117	Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
118	a) 750 x 20 mm size
119	Providing and fixing toilet paper holder.
120	a) CP Brass
121	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
122	a) 100 mm dia
123	b) 75 mm dia
124	Providing and fixing sand cast iron heel rest sanitary bend.
125	a) 100 mm dia
126	b) 75 mm dia
127	Providing and fixing sand cast iron single equal plain junction of required degree.
128	a) 100 x 100 x 100 mm
129	b) 80 x 80 x 80 mm
130	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
131	a) 100 mm inlet and 100 mm outlet
132	Add Carriage of Materials
133	i) Cement
134	ii) Steel
135	iii) CGI/GP Sheet
136	iv) Bricks
137	v)Miscellenious items like MS Grill, Hooks & Eyes, Door & Windows fitting, Angle, Floor Tiles,Hard Board Ceilling etc.
138	vi) Sand
139	vii) Machine crushedAggregate
140	SEPTIC TANK
141	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
142	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
143	a) Foundations and plinth
144	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
145	Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
146	a) Foundations and plinth
147	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement withM20(1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
148	Reinforcement of RCC work including bending, binding and placing in position complete.
149	a)Tar/TMT Steel
150	12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
151	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
152	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
153	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg), cement concrete 1 : 4 : 8.
154	(SH : FIRST FLOOR)
155	SH: - RCC WORKS.
156	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
157	Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement:2 coarse sand : 4 stone aggregate 20 mm nominal size).
158	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
159	a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
160	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
161	b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
162	Centring and shuttering including strutting, propping etc and removal of form work for :
163	c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
164	d) Lintels, beams, girders, bressumers and cantilevers etc.
165	e) Column, pillars, posts and struts etc.
166	Reinforcement of RCC work including bending, binding and placing in position complete.
167	a) Tar/ TMT Steel
168	SH: BRICK WORKS.
169	Brick work with best available local bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
170	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
171	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
172	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
173	SH: WOOD WORKS.
174	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
175	Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
176	a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
177	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
178	a) 38mm thick best available local wood class - B I
179	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
180	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
181	b) Ornamental grill.
182	Providing and fixing M.S. sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
183	a) 300 x 16 mm
184	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.
185	a) 300 x 10 mm
186	c) 150 x 10 mm
187	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
188	a) 125 mm
189	b) 100 mm
190	Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
191	a) Timber class - A IV
192	SH : STEEL WORK
193	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
194	Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
195	Providing and fixing MS round holding down bolts with nuts and washer plates etc complete.
196	SH : FLOORING
197	Providing and fixing vitrified floor tiles of approved make with water absorption less than 0.08% and conforming to IS:15622 in all shades, colours laid on 20 mm thick cement mortar1:4 i/c grouting the joints with white and matching pigment complete.[Flooring and Skirting] (c) Size of Tile -1000x1000
198	White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
199	SH : ROOFING
200	Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
201	b) 0.63 mm thick GI sheet
202	Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
203	b) 0.63 mm thick GI sheet
204	Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately)
205	Providing & fixing suspended false ceilling which consist of metal frame work with GI bottom pre coated main tee and cross tee making grid of size 600 X 600 mm with support of J Butterfly hookes with GI 10 space SWG/5MM thick wire including laying of Perforated Gypsum (acoustically good)ceilling tile made of M/S India Gipsam Ltd 6 X 4 X 12.5 mm thick the work including 2 coats of top coat (MR- ULTRA)
206	Gypsum Board finishing corner 4 \"
207	SH : FINISHING
208	15 mm cement plaster 1 : 4 (1 cement : 3 fine sand) on the rough side of single or half brick wall.
209	12 mm cement plaster 1 : 4 (1 cement : 3 fine sand).
210	Applying one coat of distemper primer of approved brand and manufacture on wall surface.
211	Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
212	Applying one coat of cement primer of approved brand and manufacture on wall surface.
213	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
214	Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
215	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
216	Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
217	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
218	SH : MISCELLANEOUS.
219	Providing and fixing approved local wood (Class - B I) railing 91 cm high with 38 mm x 38 mm wooden bars at 10 cm centre to centre complete with top and bottom rails 89 mm x 51 mm complete.
220	SH : DRAINAGE.
221	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
222	a) 150 mm dia SW pipes
223	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
224	a) 150 mm dia SW pipes
225	SH : WATER SUPPLY.
226	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
227	a) 15 mm nominal bore
228	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
229	a) 15 mm nominal bore
230	b) 20 mm nominal bore
231	Providing and fixing brass bib cock of approved quality.
232	a)15 mm nominal bore
233	Providing and fixing brass stop cock of approved quality.
234	a) 15 mm nominal bore
235	Providing and fixing PVC connection pipe with brass union.
236	a) 15 mm nominal bore
237	Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work.
238	a) 15 mm dia pipe
239	b) 20 mm dia pipe
240	SH :SANITARY INSTALLATION
241	Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
242	a) Long Pan patten WC Pan
243	Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.
244	a) WC pan with white plastic seat and lid.
245	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
246	b) Range of two urinals with 10 Litre CI automatic flushing cistern
247	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
248	a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
249	Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.
250	a) 250 x 130 x 30 mm
251	Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins.
252	Providing and fixing CP brass waste for wash basins and sinks.
253	b) 40 mm dia
254	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
255	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
256	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
257	Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
258	a) 750 x 20 mm size
259	Providing and fixing toilet paper holder.
260	a) CP Brass
261	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
262	a) 100 mm dia
263	b) 75 mm dia
264	Providing and fixing sand cast iron heel rest sanitary bend.
265	a) 100 mm dia
266	b) 75 mm dia
267	Providing and fixing sand cast iron single equal plain junction of required degree.
268	a) 100 x 100 x 100 mm
269	b) 80 x 80 x 80 mm
270	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
271	a) 100 mm inlet and 100 mm outlet
272	Add Carriage of Materials
273	i) Cement
274	ii) Steel
275	iii) CGI/GP Sheet
276	iv) Bricks
277	v)Miscellenious items like MS Grill, Hooks & Eyes, Door & Windows fitting, Angle, Floor Tiles,Hard Board Ceilling etc.
278	i) Sand
279	ii) Machine crushedAggregate
280	FURNITURE
281	Alna
282	Generator -500 Watt
283	Mirror
284	Quilt ( single) of size 4\"6\" x 7\" made from best quality printed popline cloth having 3.50 kg best quality desi cotton including making ,tailoring,threading complete.
285	Quilt ( single) of size6\"6\" x 7\" made from best quality printed popline cloth having 5.00 kg best quality desi cotton including making ,tailoring,threading complete.
286	Quilt cover ( Single) of size 4\"6\" x 7\" made from best quality plain popline cloth including tailoring complete.
287	Quilt cover ( Single) of size 6\"6\" x 7\" made from best quality plain popline cloth including tailoring complete.
288	Curlon Mattress ( medium) of size brand name SONA
289	Curlon Mattress ( Double) of size 78\" x 72\" x 4\"brand name CHAMPION
290	Curlon Pillow brand Name Sleepzz for general rooms
291	Curlon Pillow brand NameChimerafor Suits
292	Bed Sheet Best Quality ( medium Size)
293	Pillow cover best Quality of size 27\" x 17\"
294	Bed Cover best Quality ( medium size) Mayuri Brand
295	Bed Sheet (Double) Bombay Dying of standred size with 2 nos standred size pillow cover .
296	Bed Cover ( Double Size) of santro brand
297	Woolen Blanket Single Size brand name K. Tiger of Shital brand
298	Woolem n Blanket ( Double size) of best Quality
299	Towel( Big) Bombay Dying Standred Size for suits
300	Towel (Small )Bombay DyingStandred Size for suits
301	Towl (Big) Good quality of standred Size
302	Towl (Small) Good quality of standred Size
303	Window curtain with Rings ( Best Quatity ) Branded full size
304	Door curtain with Rings ( Best Quatity ) Branded full size
305	Decorative type Steel curtain rod with necessary clamps & Screws
306	Decorative type curtain rod knob with necessary screws
307	White Cotton Handkerchief ( Standred Size)
308	Door Mat Duro- tuff ( Small ) size 1\" x 2\"6\"
309	Grass Door mat ( Small ) size 1\" x 2\"
310	Door Mat Duro tuff ( Big ) size 1\"6\" x 3\"
311	Door Mat Duro tuff ( Big ) size 1\"6\" x 10 for main entrence door\"
312	DiningTableCloth best quatily ( Bombay Dying product) of size( 3.40 mx 2.250 mtr )
313	CentreTableCloth best quatily ( Bombay Dying product) of size( 1.50mx 1.20 mtr )
314	Writing TableCloth best quatily ( Bombay Dying product) of size( 1.50mx 1.35 mtr )
315	Providing & Supplying of 5 seatersofa set make by K7 Redefining home style with fixed coushion ( Triple seated -1 nos& Single Seated -2Nos) with velvet cloth covering
316	Providing and Supplying of 5 seater decorative sofa set designed & Manufactured with imported Malasian teak wood in combination with Malasian cane work with coushion and coushion cover by designer M/S cane craft NumaligarhAssam for VIP Roomi/c transportation and delivery at Wanghoo village..
317	Providing and supplying & Supplying of Decorative double size cot designed and manufactured with malasian cane with 2 nos bed side table of matching design, designed and manufactured byM/S cane craft NumaligarhAssam for VIP Normal Rooms i/c transportation and delivery at Sawa CO Hqr.
318	Providing and supplying of wooden writing table with sunmica top and one no Drawer with brass knob of dimension size 3\" x 2\" x 2\"6\" with varnish complete.
319	Sofa set Cover ( 5 ) Seater
320	Providing & supplying Ornate chair make by Supremewith fixec coushion
321	Providing & suplying of Dressing Table Make by Zuari Furniture Code -013
322	Providing & Supplying of Stool for dressing Table with fixed coushion covering Velvet cloth
323	Providing & Supplying of Dining Table Made with Local Chhap wood with Mat sunmica top Finish with varnish & Touch wood complete.
324	Milton Plastic Bucket( 25 L Cap )
325	Plastic Mug
326	Dustbin Big for Kitchen
327	Dustbin Small for Rooms
328	Ash Tray for room
329	Hot Case( 10 L Cap ) Steel
330	Hot Case ( 5 L Cap ) steel
331	Borocil Water Jug
332	Jug Plastic ( 2 L Cap )
333	Quarter Plate Bon China
334	Full Plate Bon China
335	Tea Set Bon China
336	Tea Cup & Plate
337	Dinner Set cum Tea Set of 52 pcs
338	Service Spoon
339	Desert Spoon
340	Desert Fork
341	Rice Spoon
342	Tea Spoon cum Sweet Spoon
343	Glass Bowl ( Small)
344	Ordinary Water Glass
345	Milton Steel Flask( 1 L Cap )
346	Plastic Tray ( Medium)
347	Alluminium Sauce Pan with Lid ( 20 kg Cap) best Quality branded product.
348	Alluminium Sauce Pan with Lid ( 10 kg Cap) best Quality branded product.
349	Alluminium Sauce Pan with Lid ( 5 kg Cap) best Quality branded product.
350	Alluminium Sauce Pan with Lid ( 4 kg Cap) best Quality branded product.
351	Alluminium Sauce Pan with Lid ( 3 kg Cap) best Quality branded product.
352	Alluminium Sauce Pan with Lid ( 2 kg Cap) best Quality branded product.
353	Iron Kadahi Big ( Best Quality )
354	Iron Kadahi Small( Best Quality)
355	Hawkins Pressure Cooker ( 12 Ltr Cap )
356	Hawkins Pressure Cooker ( 22 Ltr Cap )
357	Iron Tawa
358	Plastic Tray Small
359	Stainless Steel Water Filter ( Double Candle System ) 18 L Cap )
360	PVC Pirah
361	Gas Stove Double Burner ( Bajaj)
362	Providing & supplying of centre table Made with Local Chhap wood and top with 6 mm glass
363	Providing & Supplyinh of Dining Chair Make by Supreme with fixed coushion ( R/Super)
364	Providing & Supplying of Tea Poy
365	COMPOUND WALL (for 357.00 mtr)
366	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
367	Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
368	Reinforcement of RCC work including bending, binding and placing in position complete.
369	b) Cold twisted bars.
370	Centring and shuttering including strutting, propping etc and removal of form work for :
371	a) Foundation, footings, bases of columns etc. and mass concrete.
372	b) Column, pillars, posts and struts etc.
373	c) Lintels, beams, girders, bressumers & cantilevers etc.
374	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :
375	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
376	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
377	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
378	Reinforced cement concrete work in lintels, beams & bressumers upto floor two level i/c finishing & plastering the exposed surface with cement mortar 1:3 (1 cement : 3 Fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering , shuttering & reinforcement.
379	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
380	Brick work with best available local bricks in foundation and plinth in cement mortar1:4 ( 1 cement : 4 fine sand).
381	Half brick masonry (with best available local bricks) in cement mortar 1:3 (1cement : coarse sand) in foundation and plinth.
382	Extra for halfbrick masonry in superstructure above plinth level up to floor two level.
383	Providing and supply of MS Angle Iron Post of size 50x50x6mm
384	Providing and supply of G.I. Barbed wire .
385	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
386	Applying one coat of cement primer of approved brand and manufacture on wall surface.
387	Finishing wall with water proofing cement paint of approved brand and manufacture and required shade on new work (Three or more coats) to give an even shade.
388	Carriage of Engineering materials such as cement, steel, Boulder, sand, aggregate etc. by mechanical transport including loading, unloading and stacking in measurable stacks.
389	Cement
390	Steel
391	Angle iron Post+Barbed wire
392	Bricks
393	Aggregate
394	Sand
395	MS Gate -2 nos
396	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
397	Dry rubble flooring
398	Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
399	Reinforcement of RCC work including bending, binding and placing in position complete.
400	b) Tor/TMT Steel
401	Centring and shuttering including strutting, propping etc and removal of form work for :
402	a) Foundation, footings, bases of columns etc. and mass concrete.
403	b) Column, pillars, posts and struts etc.
404	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :
405	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
406	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
407	c) 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
408	Applying one coat of cement primer of approved brand and manufacture on wall surface.
409	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
410	Providing and Supply of MS Gate...
411	Carriage of Engineeringmaterials such as Cement, Steel, Bitumen Bitumen emulsion, CGI Sheet & Bricks etc. by mechanical transport including loading, unloading and stacking at site as per direction of Engineer - in - charge from Bhalukpong to site of work (Hill road).
412	Cement
413	Steel
414	Bricks
415	Boulder
416	Aggregate
417	Sand
418	CC Parking Lot (for 816.00 Sq.m)
419	Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m.)
420	Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade.
421	PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.)
422	Cost of carriage of engineering materials
423	Sand
424	Aggregate
425	Cement
426	CC Pavement Approach Road (for 720.00 mtr)
427	Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m.)
428	Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade.
429	Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)
430	By Manual Means
431	Grading- I(Using Screening Crushable type such as Moorum or Gravel)
432	Cement Concrete Pavement( Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transport to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primmer,joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing)
433	Cost of carriage of engineering materials
434	Sand
435	Aggregate
436	Cement

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Arunachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Circuit House At Sawa Co Hqr., East Kameng District., Kameng-Arunachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Circuit House At Sawa Co Hqr., East Kameng District., Kameng-Arunachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us