|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not hacking), removing serviceable tiles away from site and rubbish off the premises complete all as specified and as directed. |
| 2 | M & L for screed bed or bedding layer of mortar 15mm thick in cement plaster 1:4 for laying floor finishes complete all as specified and as directed. |
| 3 | M & L for Non - skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 4 | M & L for non skid ceramic tiles 7 to 8mm thick (square/rectangular) area each tiles exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 5 | M & L for rendering 10mm thick cement plastered as bedding layer / screed bed on fair surfaces of brick in cement mortar (1:3) to receive wall tiles complete all as specified and as directed. |
| 6 | M & L for non skid ceramic tiles 7 to 8mm thick (square/rectangular) area each tiles exc 0.11 Sqm but n.exc 0.18 Sqm, in vertical surface/ skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 7 | M & L for glazed ceramic tiles 300mm x 200mm x 6 to 7mm thick in vertical surfaces., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 9 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 10 | Demolition of cement concrete (un-reinforced) in ground floors and pavingsexceeding15 cm thickness above ground floors complete all as specified and directed. |
| 11 | M & L forproviding 100mm thickcement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 12 | M & L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in cement mortar (1:6) complete as specified and directed. |
| 13 | M & L for cement concrete (1:2:4) type B-0 (using 12.5mm graded aggregate) as in flooring and rounded or chamfered on edges complete all as specified and as directed. |
| 14 | M & L for providing cement concrete type C-2(1:3:6) (using 40mm graded aggregate) as in plinth protection complete all as specified and as directed. |
| 15 | M & L for providing cement concrete type C-1, (1:3:6) (using 20mm graded stone aggregate) as in coping, benching, bed plate, including necessary form work complete all as specified and as directed. |
| 16 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 17 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 18 | S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | S & F Rolled sections Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 21 | S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 22 | S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and as directed. |
| 23 | M & L for preparation of new surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | M & L for preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 26 | M & L for precast cement concrete block masonry with solid blocks, type C-1 (1:3:6) (using 20mm graded stone aggregate) exc 10cm in width and set in cement mortar (1:4) complete all as specified and as directed. |
| 27 | Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to receive new plaster complete all as specified and as directed. |
| 28 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM (1:4) complete all as specified and as directed. |
| 29 | M & L for rendering 15mm thick in cement mortar(1:6) on fair faces of solid block or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M & L for preparing new plastered surfaces of wall and applying two coats of OBD over primer on decorated wall surfaces of any description, complete all as specified and as directed. |
| 31 | M & L for preparing old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and as directed. |
| 32 | M & L for preparing old plastered surfaces of wall and applying one coat of cement based paint complete all as specified and as directed. |
| 33 | M & L for one coat of antifungal exterior acrylic emulsion on wall surfaces of any description complete all as specified and as directed. |
| 34 | M & L for applying wall care putty, in two coats over wall surfaces & smoothening the surfaces with sand papers etc (Preparatory to OBD/plastic emulsion/interior/exterior emulsion paints)complete all as specified and as directed. |
| 35 | M & L for preparation of old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 36 | Taking down chowkats or frame with shutters (without taking off shutters from the frame), n.exc 1.5 Sqm each complete all as specified and as directed. |
| 37 | Taking down chowkats or frame with shutters(without taking off shutters from the frame),exc 1.5 Sqm but n.exc 4.0 Sqm eachcomplete all as specified and as directed. |
| 38 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. |
| 39 | S & F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. |
| 40 | S & F Stainless Steel butt hinges 100mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and directed. |
| 41 | M & L extruded aluminium alloy handles 100mm, fabricated type, anodized complete all as specified and directed. |
| 42 | M & L aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and directed. |
| 43 | M & L for aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedcomplete all as specified and as directed. |
| 44 | S & F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples all as specified and directed. |
| 45 | Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed. |
| 46 | S & F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 47 | S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 48 | S & F in repairs 12mm dia stainless steel curtain rail 12 mm dia fixing with all types of bracket to required length complete all as specified and directed. Note : Quoted rate included for side bracket for fixing complete |
| 49 | S & F 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 50 | S & F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or errecting stand complete all as specified and directed. |
| 51 | S & F in repairs, vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush type) with and including connection to trap, set in and including concrete but connection to flushing pipe, anti syphonage pipe etc., complete inlcuding making good to floor, connection to drain (or out going pipe) etc., complete all as specified and as directed by Engineer-in-Charge (Make : Cera/Johnson/Parry Ware). |
| 52 | S & F in repairs European type WC (Pedestal Pattern) complete inlcuding pedestal pan and trap inlcuding connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as spefcified and directed. |
| 53 | S & F in repairs PVC valve less, syponic action type flushing cistern, 10 litres, low level, white with inlet ball valve, float and handle inlcuding brackets complete all as specified and directed. |
| 54 | Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed. |
| 55 | S & F steeltubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 56 | S & F 32mm bore low density polythylene pipes (LDPE) of pressure rating 6 Kgf/cm2 laid in trenches complete all as specified and directed. |
| 57 | S & F in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed. |
| 58 | S & F in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and directed. |
| 59 | S &F in repairs pillar taps fancy type, cast copper alloy,with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and ply nuts screwed for iron pipes and fixed complete all as specified and directed. |
| 60 | S & F in repairs 32mm size waste couplings of PTMT (half or full threaded) (minimum weight 32mm- 45gms) complete all as specified and directed. |
| 61 | S & F in repairs towel rail 450mm long of Stainless Steelfixed with and inlcuding chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed. |
| 62 | S & Fin repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed. |
| 63 | S & F in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed. |
| 64 | S & F in repairs PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed. |
| 65 | M & L for cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using splited bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed. |
| 66 | Dismantling of wall panelling/ceilling (fibre, pulp, insulation etc) of any description of any thickness including cover fillets complete all as specified and as directed. |
| 67 | S & F aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 x 600 mm consisting of Tee/Angle section, size 40 x 40 x 2 mm thick as approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass/stainless shunk screws, aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6 mm dia GI wire hook in Tee members at 1.5 m Centre to Centre fixed to steel truss orroof complete all as specified and directed. |
| 68 | M & L for fixing in position 4 mm thick Non Asbestos designer ceiling board of size 595 x 595 mm as per manufacturer\"s specification complete all as specified and as directed. |
