Rates For Construction Of Collector Office In Premises Of Collectorate With Electrification At Chandrapur, Tah. And Dist. Chadrapur , Providing And Applying On Wall/ R.C.C Structure Of Stone Look For Vertical Stamping Textues On Plastered Vertical Faces Of Walls Of Brick, Concrete Surface As Per The Required Specification For Required Priemer, Making Grooves For Patterns, Filling The Joints/ Grooves With Approved Quality Adhesive Of Required Varying Thickness As Per The Site Conditions, Cleaning The Finished Surface Of Any Surplus Glue Or Dirt, Properly The Item Includes All Material, Tools, Machineries, Skilled/ Semiskilled Labour, Scaffoldings And Artist Loading Unloading, Levelling, Curing, Rectofication As Per Suggestions, Cleaning The Site Material Of Etc. Complete , Flooring In Granite - Providing And Fixing Machine Cut Stone (Leather Finished Telephone Black Granite Or Any Other As Per Selection) Out Of 450 X 1800 X 30 Mm Size, For Flooring On Cm (14) Bed With Curing, Including All Wastage, Breakage Etc.Complete , Designing, Manufacturing As Per Drawing, Supplying And Installing In Position, Gfrc Jali (Wj) (Height As Per Drawing) Specifications: Gfrc- Compressive Strength 80 Mpa, Flexural Strength (Mor) - 18 Mpa, Flexural Lop - 8 Mpa, Wherever Required Gfrc With Stud Frame And Flex Anchors To Be Adopted For Cornices Or Similar Components. Mild Steel If Used Should Be Passivated And With A Epoxy Primer And Pu Coating Exposed Steel Brackets/Cleats/Hardware Should Be Hot Dipgalvanized (Hdg). Fasteners-Plated Fromhilti/Klimas/Fischer Or Equivalent. The Price Shall Includepreparation Of Shop Drawings, Manufacturing, Transport, Unloading And Installation Completed In All Respects Including Scaffolding Upto 3 Storeys Or 12 M Height If Required. As Directedby Engineer-In-Charge. Dimension - 0.05M Thick. , Providing & Fixing In Position Collectors Main Table Of- Size3 0M X1 0M X 0.75M& Side Table Of Size 1 2 X 0.60M Top Is Made Out Of 19Mm Thk Ply Finished With 4Mm Thk Veneer With Pu Coating, Table Edges Made Out Of Premium Quality Teak Wood 1Mm Thk External Grade Laminate Is Used For Combination Drawers/Shutters Made Out Of19mm Thk Marine Ply & Internal Sides Of Drawers & Shelvesmade Out Of 12Mm Thk Marine Ply All Internal Surfaces Finishedwith 1Mm Thk White Laminate All Tw & Veneer Surfaced Finishedwith Melamine Polish. T W Leaping, Heavy Duty Telescopic Drawer Channels, Hinges For Shutters, 100 Mm Ss Finishhandles, S.S Finish Drawer Locks, Adhesive, Nails At All Levelslead Lift Etc Complete With Approved Make Necessary Screws Accessories As Per Detail Drawings Woodtech Emporio Pupolish- Providing And Applying For (Solid Wood And Veneersurfaces-For Table Tops) For Prepare The Surface Sand The Surface Using Sand Paper No. 180 Followed By Sand Paper No. 320 Or 400 And Wipe Clean Then Mix Asian Paints Emporiosealer Base And Hardener In The Ratio 2:1 By Volume And Thin With Asian Paints Pu Thinner 30-50% Use The Mix Within 3Hours. Spray 2-3 Coats Of Sealer With Intercoat Interval Of 2-3Hours. Apply Additional Coats If Required Allow Overnight Drying Then Sand With Sand Paper No 320/400 Between Coats. Mixasian Paints Emporio Topcoat Base And Hardener In Theappropriate Ratio And Thin With Asian Paints Pu Thinner 30-50% Use The Mix Within 3 Hours. Recommended Base Hardener Ratiofor Topcoat., Emporio Matt (Clear, White & Black) = 2 1,Emporioglossy (Clear, White & Black) = 11, Spray 2 Coats Of Topcoatwith Intercoat Interval Of 3-4 Hours Sand With Sand Paper No320/400 Between Coats Etc. Complete. As Per Detailed Drawings And As Directed By Consultant / Engineer-In-Charge , Providing & Fixing In Position Collectors Back Side Table Size 4 M X0.40 M For Made Out Of 19Mm Thk Ply Finished With 4Mm Thk Veneer With Pu Polish, Table Edges Made Out Of Premium Quality Teak Wood 1Mm Thk External Grade Laminate Is Used For Combination Drawers/Shutters Made Out Of 19Mm Thk Marine Ply & Internal Sides Of Drawers & Shelves Made Out Of 12Mm Thk Marine Ply. All Internal Surfaces Finished With 1Mm Thk White Laminate. All Tw & Veneer Surfaced Finished With Melamine Polish All Tw & Veneer Surfaced Finished With Melamine Polish. T. W Leaping, Heavy Duty Telescopic Drawer Channels, Hinges For Shutters. 100 Mm Ss. Finish Handles, S. S Finish Drawer Locks. Adhesive, Nails At All Levels Lead Lift Etc. Complete With Approved Ake Necessary Screws Accessories As Per Detailed Drawingsnd As Directed By Consultant / Engineer-In-Charge , Providing & Fixing In Position Side Table For Collector Made Out 19 Mm Marine Ply And Drawers/ Shelves Made Out Of 12 Mm Ply. T W Leaping 25 Mm X12 Mm, 4.0 Mm Thick Decowood Coral Wood Species Sample Veneer For Exposed Surfaces, Melamine Polish(3 Coats Of Sealer And 2 Coats Of Melamine Sanding Filling To Give Smooth Finish Upto Satisfaction Of Architect)For Veneer Surfaces And Leaping. 10 Mm Greenlam 261 Hdg)Dark Grey Laminate Externally 1.0 Mm White Laminate Internally, 100 Mm Ss Finish Handles S S Finish Drawer Locks S.S Finish Duck Hinges, Heavy Duty Telescopic Drawer Channels 60 Mm Thick Plain Glass For Drawers Adhesive Nails At Alllevels Lead Lift Etc. Complete With Approved Make Necessarysheet Metal Screws Accessories As Per Detailed Drawings Andas Directed By Consultant / Engineer-In-Charge , Providing & Fixing Conference Table Size 9. 15M X 3.5M X.75M Ht For Conference Room Top Is Made Out Of 19Mm Thky Finished With 4Mm Thk Veneer With Pu Polish, Table Edges Made Of Premium Qualityteak Wood (3 Coats Of Sealer And 2 Coats Of Melamine, Sanding Filling To Give Smooth Finish Upto Satisfaction Of Architect) & Footrest Is Made Out Of 19Mm Thk Ply With French Polish Finish Adhesive Nails At All Levels Lead Lift Etc. Complete With Approvedmake Necessary Screws Accessories As Per Detailed Drawingsand As Directed By Consultant/Engineer-In-Charge.
