|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)Bd.A.1 Page No. 259 |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area & stacking and spreading as directed dewatering preparing the bed for the foundation and necessary back filling ramming watering including shoring and strutting etc complete (Lift upto 1.50 m) By Mechanical Means[ PWD S.S.R. It. No 21.06/ P.No.152 ] |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincludingbailing out water formworklaying/ pumpingcompactingrougheningthem if special finish is to be providedfinishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand( PWD S.S.R. It.No.24.01 P.No.175) |
| 4 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite / quartzite/ gneissmetal for RCC workin foundations like raft strip foundations grillage andfootings of RCC columns and steel stanchions etc including bailing out waterformwork laying/ pumpingcover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etccompleteWith natural sand/V.S.I. quality Artificial Sand ( PWD SSR It.No 25.11 P No 178 ) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for RCC columns as per detailed designs and drawing or as directed including centering formwork cover blocks laying/ pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete With natural sand/V.S.I. quality Artificial Sand ( PWD S.S.R. It.No.25.31 P.No.179) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for RCCbeams and lintels as per detailed designs and drawings or as directed including centering formwork cover blocks laying/pumping compaction and roughening the surface if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/ VSI quality Artificial Sand ( PWD S.S.R. It.No.25.50P.No 181) |
| 7 | Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces raking out joints on exposed faces and watering etc Complete ( PWD SSR It.No.27.01 P.No.197 ) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet moulded or chamfered as per drawing or as directed including steel centering plywood/ steel formwork compacting, roughening them if special finish is to be provided finishing uneven and honeycombed surface and curing etc complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag plastic tarpaulin etc (Wooden centering will not be allowed) [ PWD S.S.R. It. No-24.16 / P.No.177 ] |
| 9 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. ( PWD S.S.R. It.No.21.36 P.No.157 ) |
| 10 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. ( PWD S.S.R. It.No.21.37 P.No.157 ) |
| 11 | Providing soling using 80 mm size trap metal in 15 cm layer including filling voids with Crushed sand/grit ramming watering etc complete ( PWD S.S.R. It.No.21.40 P.No.157 ) |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for RCC chajja as per detailed design & drawings including centering formwork cover blocks compacting curing finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/VSI quality Artificial Sand [ PWD SSR It.No 26.05 / P.No.184] |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering formwork cover blocks laying/ pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth & even surface or roughening if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand[ PWD S.S.R. It. No 25.70/ P.NO.182 ] |
| 14 | Providing and fixing in position TMT-FE-500 bar reinforce ment of various diameters for RCC pile caps footings foundations slabs beams columns canopies staircase newels chajjas lintels pardis copings fins arches etc as per detailed designs drawings and schedules including cutting bending hooking the bars binding with wires or tack welding and supporting as required complete[ PWD S.S.R. It. No- 26.33/ P.NO.188 ] |
| 15 | Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface[ PWD S.S.R. It. No- 26.68/ P.NO.196 ] |
| 16 | Finishingtheterrace slab integrally mixed with waterproofingcompound in C.M.1:3 with12mm. Thick layer including curing , finishing, usingwaterproofcompound, asapprovedbyengineerincharge atthe rate of 1Kg.per bagof cement etc comp. (Amravati Div DSR 2019-20 Dt 1/07/2019. It.No.01/ P.N.) |
| 17 | Providing second class Burnt Brick masonry with conventional / IS type bricks in cm 1:6 in superstructure including striking joints raking out joints watering and scaffolding etc Complete. ( PWD S.S.R. It.No.27.05 P.No.197 ) |
| 18 | Providing second class Burnt Brick masonry with conventional / IS type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.( PWD S.S.R. It.No.27.06 P.No. 197 ) |
| 19 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete [ PWD S.S.R. It. No-39.02 / P.NO. 245] |
| 20 | Providing & fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to IS 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm[ PWD S.S.R. It. No-39.56/ P.No. 257] |
| 21 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete [ PWD S.S.R. It. No-39.08 / P.NO. 246 ] |
| 22 | Providing and fixing fiber glass reinforced polyster door shutter 30mm thick as per IS14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixture sand fastening with chromium plated handles on both sides, etccomplete[ PWD S.S.R. It. No- 39.58/ P.NO. 257 ] |
| 23 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. [ PWD SSR. It No 39.09 / P.No 246] |
| 24 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting withone coat of anticorrosive paint and two coats of oil painting complete. [ PWD S.S.R. It. No 40.02 / P.NO.263 ] |
| 25 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.. [ PWD S.S.R. It. No- 39.29/ P.NO.249 ] |
| 26 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete[ PWD S.S.R. It. No- 32.02 / P.NO.209 ] |
| 27 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.[ PWD S.S.R. It. No- 32.04/ P.NO.209 ] |
| 28 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 29 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box [ PWD S.S.R. It. No-39.40 / P.NO.252] |
| 30 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cementmortar and araldite curing polished and cleaning etc. complete. [ PWD S.S.R. It. No- 33.38 / P.NO.217] |
| 31 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float filling joints curing and clearingetc completea) Flooring[ PWD S.S.R It No 33.40 /P.No 217] |
| 32 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS 15622-2006 ( group Bla) of approved make shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float filling joints curing and clearingetc completeb) Skirting [ PWD S.S.R. It No 33.41 /P.No.217] |
| 33 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.. [ PWD S.S.R. It. No- 33.24 / P.No. 215 ] |
| 34 | Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. [ PWD S.S.R. It. No- 33.25 / P.No. 215] |
| 35 | Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. [ PWD S.S.R. It. No- 33.66/ P.NO.220 ] |
| 36 | Providing & applying washable oilbound distemper of approved colour & shade to new surfaces in two coats including scaffol dingpreparing the surfaces (excluding the primer coat.) etc. complete.[ PWD S.S.R. It. No-36.11 / P.No.227] |
| 37 | Providing and applying three coats of water proof cement paint of approved manufacture & of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. [ PWD S.S.R. It. No-35.15 / P.NO 224 ] |
| 38 | Providing & fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approvedmake Slim wall hung cistern with installation kitincluding S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete beddingwithout flushingtank and its accessories etc.complete[ PWD S.S.R. It. No. 48.42 / P.NO.228 ] |
| 39 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe & with necessary fixtures and fitting such as bends tees single junctions slotted vent clamps etc complete[SSR It No 42.51 / P.No. 279] |
| 40 | Providing and fixing 100 mm dia stabiliser pipe/ PVC soil vent/ waste pipe & with necessary fixtures and fitting such as bends tees single junctions slotted vent clamps etc complete[SSR It No 42.52 / P.No. 279 ] |
| 41 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters [ PWD S.S.R. It. No- 42.53 / P.NO. 280 ] |
| 42 | Providing and fixing white glazed earthenware WashHand Basin of 45cm x30cm size including cold waterpillar tap/ cold and hot water pillartap brackets,rubber plugs and brass chain,stop tap and necessary pipe connection including P.V.C. waste pipe and trap upto the outside face of the wall. Making good the damaged surface, testing etc. complete. [ PWD S.S.R. It. No- 41.64 / P.NO. 252 ] |
| 43 | Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [ PWD S.S.R. It. No- 42.62/ P.NO. 281 ] |
| 44 | Providing and fixing on walls/ ceiling/ floor 15 mm dia.CPVC pipe with necessary fittings remaking good the demolished portionetc complete Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [ PWD S.S.R. It. No- 42.55 /P.NO. 280 ] |
| 45 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.[ PWD S.S.R. It. No- 41.40 / P.No 270] |
| 46 | Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) [ PWD S.S.R. It. No- 43.17 / P.No. 288] |
| 47 | Providing and fixingInformation sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. [ PWD S.S.R. It.No 6.47/P.No.64] |
