|
| 1 | Supply, Installation, Testing & Commissioning of 7.5M height galvanized polygonal signal pole with dia 350mm A/F, 4mm thickness with 6M cross arm with dia 90mm A/F, thickness 4mm fabricated from HT steel confirming to BS EN 10025, S-355 JO with 520x16mm base plate. |
| 2 | Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross- sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundationbolts. 5 Mtr. |
| 3 | SITC of following color retrofit LED matrices traffic light of modular size 300mm dia. Covered with front clear acrylic sheet and back with aluminum body, InP/InGan based 5mm dia. Colored LEDs of ultra bright, super intensity (visible clearly at day time up to distance 300-600 Meter, viewing angle of 30 degree). The unit shall be suitable for working on A.C supply (160-240V) and life cycle approx 10 yrs with power consumption below 24 Watts, suitable fore fast switching |
| 4 | Red/Amber Round (unit of 200-220 Nos LEDs) |
| 5 | Green Arrow (Unit of 120-130 Nos LEDs) |
| 6 | Add extra for SITC of LED matrices with M.Shousing |
| 7 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR.3.5 core 50 sq m |
| 8 | P/Laying P.V.C./XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS: 1554 P-I/IS: 7098 P – I of Group 1 of approved make in ground as per IS: 1255 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 2.5 sq mm. Armoured 4 core |
| 9 | Supplying and drawing PVC insulated & sheathed solid/ stranded copper conductor multi core control cable ISI marked (IS:1554) of 1.1 kV grade of approved make as per chapter E11,in existing surface or recessed conduit/ casing capping including making connections etc. as required. 1.5 sq mm. Armoured 4 Core |
| 10 | S.I.T.C of programmable three digit digital count down timer with 5mm dia. Red colored LEDs of high intensity (visible clearly at day time) of reputed make with digit size 150mm x 300mm approx and quantity of LEDs be approx 800 Nos. including interconnection with traffic signal controller and housing the LED assembly in sheet metal box of size approx 750mm x 550mm with detachable pole arms clamps etc. as required. |
| 11 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty Copper lugs duly crimped with crimping tool, PVC tape etc. for following size of armoured PVC insulated & PVC sheathed/XLPE aluminum conductor cable of 1100 volt grade asrequired of size. 4 X 2.5 sq.mm |
| 12 | P&F in position frame made out of M.S angle (riveted or welded) finished wit two coats of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. 40mm x 40mm x 5mm |
| 13 | SITC microprocessor based UTCS type automatic electronic controller conforming to IS: 7537 for traffic signals complete with electronic timer, G.P.S based control board, blinker unit for night operation and slip lane, daytime peak hours operation. The controller shall have 32 signal phases, 25 signal plan, 24 Cycle Plan, 32 Signal Split Plan, 32 Cycleswitching/days, 20 selective days/annum, 16 conflicting conditions, 32 signal line, solid state relay switching R.S 485 communication and 4 hurry call inter phase, manual override facility up gradable vehicle actuated system, also have method of traffic control with fixed time isolated intersection andcable less/ cabled interlinking for synchronized operation. The unit shall be totally enclosed in 2.00mm thick metal sheet box size 99 cm x 61.5 cm x 35.3 cm (C-DAC make). |
| 14 | SITC of Cutting back up surface upto 2 Mtr depth by digging by Bogi including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost of bitumen). |
| 15 | P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini orIS:14930 marked make. Complete Rate. |
| 16 | 90 mm |
| 17 | 110 mm |
| 18 | S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required.125 MM |
| 19 | Providing, installation, testing and commissioning of UPS SYSTEM, Single Phase 230 V, 50 Hz with 2 hour backup SMF battery bank as per specification. 3 KVA |
| 20 | Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in-charge. |
