|
| 1 | Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed. |
| 2 | Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Taking down shutters of any descriptionexc 1.00 sqm but n.exc 2.00 sqm each. |
| 4 | M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed |
| 5 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement complete as specified & directed. |
| 6 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed. |
| 7 | S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified & as directed. |
| 8 | S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 9 | S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete. |
| 11 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile n.exceeding 0.18 Sqmin floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 12 | Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed. |
| 13 | Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed. |
| 14 | S&F 20 mm outer dia ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittingssuch as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents laying in wall/ceiling or laying in floors complete all as specified. |
| 15 | S&F 25 mm outer dia ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittingssuch as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents laying in wall/ceiling or laying in floors complete all as specified. |
| 16 | S&F in repairs, fancy type15mm dia long body Bib taps cast copper alloy,chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed. |
| 17 | S&Fin repair 15mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 18 | S&F vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe and to flushing pipe antisyphonage pipe etc with plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete fixed in repair all as specified & directed. |
| 19 | S&F in repairs PVC High/Low level flushing cistern dual flush 6/9 litres capacity including all fittings i.e float valve, syphon,flush pipe, brackets all as specified and directed. |
| 20 | S&F in repairPVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed. |
| 21 | S&F in repair PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 22 | S&F in repair PVC (SWR) bends 110mm dia any radiusall as specified and directed. |
| 23 | S&F in repair PVC (SWR) junction 110 mm dia single, (Single T) equal or unequalall as specified and directed. |
| 24 | M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified & directed. |
| 25 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed. |
| 26 | M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 27 | Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge. |
| 28 | M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions |
| 29 | S&F 6 mm thick Plywood, grade BWR, type BB, fixed with screws to steel frame work complete all as specified and directed |
| 30 | M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 31 | Dismantling wrought cast iron or mild steel work of any description not otherwise provided for |
| 32 | S&F rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails fixed with angle cleat or other connecting plates complete all as specified and as directed. |
| 33 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 34 | S&F framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed. |
| 36 | S&F4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each panecomplete all as specified and as directed. |
| 37 | M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 38 | M&L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 39 | Material & Labour forPCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling, sub base etccomplete all as specified and as directed. |
| 40 | M & L for Chequered cement conc tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor over and incl layer over 15mm thick bedding of cement mortar (1:6) complete all as specified and as directed |
| 41 | M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded aggregatein roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified and directed. |
| 42 | S&F in repair brass chromium plated shower roses 125 mm sizewirh arm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 43 | M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed. |
| 44 | S&F in repair PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 45 | Excavating in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation etc or for shafts, wells, casspits, manholes, pierholes etc n. exc 10 sqm on plan & n. exc 1.5m in depth and getting out in soft and loose soil complete all as specified and directed by Engr-in-Charge. |
| 46 | Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stoneaggregates)in foundations, filling, mass concrete etccomplete all as specified and directed. |
| 47 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directd by engr-in-Charge |
| 48 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as directed. |
| 49 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 50 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finished fair and even complete all as specified and asdirected. |
| 51 | M&L for RCC type B-1, 1:1 1/2:3 B-1 (using 20mm graded aggregate) as in as cover slab for manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form workcomplete all as specified and directed |
| 52 | M&L TMTbars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips. |
| 53 | Surface excavation30cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 54 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft / loose soil complete allasspecified and directed |
| 55 | Material & Labour for plain cement concrete (1:2:4), type B-2, (using 40mm graded stoneaggregate)in foundations, filling, mass concrete etccomplete all as specified and directed. |
| 56 | Supply & Fixing mild Steel work in tubular/hollow square/rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009)grade Yst-310 complete all as specified and directed. |
| 57 | Supply & Fixing mild Steel work in tubulartrusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009) grade Yst-310 complete all as specified and directed. |
| 58 | S&F forrolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachmentconforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed. |
| 59 | M&L for hardcore of gauge63mm of broken stone or boulders deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surfaces complete all as specified and as directed. |
| 60 | Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size /shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compected bed of course sand, compacting and proper embedding/ laying of interlocking paver blocks over and incld the sand bedding layers through vibratory compaction by using palte vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete. |
| 61 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directd by engr-in-Charge |
| 62 | M&L for brick work with sub class old size \"B\" bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed. |
| 63 | M&L for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying two coat of cement base paint over a coat of primer complete all as specified & directed. |
| 64 | M& L for 40 mm thick PCC type B-1 using 20 mmgraded stone aggregate as inflooring finished even and smooth without using extra cement as in floor complete all as specified & as directed. |
| 65 | Material & Labour forPCC 1:4:8 type D2 using 40mm graded aggregate as in floor subbasecomplete all as specified and as directed. |
| 66 | M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified & directed. |
| 67 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge. |
| 68 | Material and labour for point wiring (surface type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified as directed. |
| 69 | All as per Ser item No. 68.00 but for One socket outlet 3 or 5 Pin, 6 Amp on same board complete all as directed. |
| 70 | All as per Ser item No. 68.00 but for One socket outlet 3 or 5 Pin, 6 Amp on independent board complete all as directed. |
| 71 | Supply and fix modular switch 1 way, 6 A, 1 module all as specified and as directed. |
| 72 | Supply & fix ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed. |
| 73 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete withall accessories and fixing the light fitting to walls / roof including taking down old U/S fitting complete all as specified & directed |
| 74 | S&F LED building security light fitting 35W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection and impact resistance of IK07 incl mounting bracket with clamp of suitable size and connection complete incl taking down old unsv one, all as specified and directed. |
| 75 | S&F in repair single pole and neutral DB wall mounting type,240 Volts,4 Way with 200 Amps rated bus bar,double door suitable for fixing MCB\"s including connecting etc complete all as specified and directed. |
| 76 | Supply andfix in repair MCB single pole & neutral32 amps, 240 volts, 10 KA, \"C\" series with all incoming / outgoing connections with proper size of aluminium lugs completeall as specified as directed |
| 77 | Supply andfix in repair MCB single pole6 to 32 amps, 240 volts, 10 KA, \"C\" series with all incoming / outgoing connections with proper size of lugs completeall as specified as directed. |
| 78 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways completeall as specified & directed by Engineer-in-Charge. |
| 79 | Supply and fix modular socket 6A 2/3 pin combined 2 module all as specified and as directed. |
| 80 | Supply and fix modular switch socket combination outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch complete all as specified and as directed. |
| 81 | Suplly and fix modular type fan step regulator, 120W - 2 module as fixed in repair complete all as specified and directed. |
| 82 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete withall accessories and fixing the light fitting to walls / roof including taking down old u/s light fittings complete all as specified & directed |
| 83 | S&F in repair single pole and neutral DB wall mounting type,240 Volts, 8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB\"s including connecting etc complete all as specified and directed. |
| 84 | Supply, installation,testing & commissioning of Metal Top Deep Freezer of 405/425 Ltr capacity rating single phase, 240 volt, 50 Hz complete all as specified and as directed. |
| 85 | Supply, installation,testing & commissioning of voltage stabilizer suitable for 405/425 Ltr Deep-freezer with working voltage range from 130V to 290V single phase AC supply 50 Hz frequency complete all as specified and as directed. |
| 86 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 87 | Material and labour for point wiring (surface type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. |
| 88 | Supply, installation,teting & commissioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 Ltr, 230V , 50Hz AC supply complete all as specified and as directed. |
| 89 | Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified. |
| 90 | Material and labour for brick protection using old size sub class ‘B’new bricks, laid flat dry but jointed, laid length wiseperpendicular to theaxis of cable all as specified and directed. |
| 91 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade after taking down old unserviceable cable with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and as directed. |
| 92 | Supply and laying 40 mm bore GI tubing light grade laid in trenches/wallfor cable protection complete all as directed. |
