Tender For Repair And Renovation For Mpcb Office At Udyog Bhavan, Sangli, Mumbai-Maharashtra

TDR : 48204506

Tender Notice
BOQ

Expired

Mumbai , Maharashtra

Tender Brief : Tender For Repair And Renovation For Mpcb Office At Udyog Bhavan, Sangli

Document Fees
₹ 1180 /-

EMD
₹ 104846.0 /-

Tender Value
Refer document

Submission Date
02-04-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Sub Estimate No.1 - Demolition & Civil works
2	Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.
3	Removing wooden or A.C. partition including frame work and stacking the materials as with all leads, lifts etc. complete.
4	Removing planking from roof or ceiling and stacking them sa directed with all leads and lifts etc. complete
5	Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
6	Removing cement tiles, or marble or polished shahabad or any other material floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
7	Dismalting old existing electrical works including swith, socket, wire etc with all lift & leads etc. complete as per directed.
8	Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.Toilet urinal wall
9	Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
10	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
11	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
12	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
13	Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
14	Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. complete. (Considering avg. depth of 200 mm)
15	Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.
16	Chipping the R.C.C. surface and cleaning the rusted reinforcement and exposed surface by wire brush mechanical device or any other established method and applying rust removing solution of approved make and quality with cotton waste swab to reinforcement and allowing to dry the same for 24 hours, brushing of loose particle and applying 1st coat of rust preventive coating of polymer and cement slurry in 1:1.5 proportion with soft brush without adding water including applying another coat of rust preventing after 4 hours allowing Air Curing for 48 hours etc. including scaffolding etc. complete. For Beams in toilet
17	Providing and applying priming cum bonding coat of polymer of approved make and quality as approved by Engineer-in-charge and cement slurry in 1:1 proportionate by weight to concrete area by brush or any other established method etc. complete.
18	Providing and applying 15 mm thick polymer mortar to load carrying R.C.C member in two layers in proportion of 1:5:15 by weight Polymer of approved quality and make, cement and wash quartz sand with required W.C. ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufactures specification etc. complete.
19	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
20	Providing and laying vitrified matt/rustic/stone fininsh tiles having size 590 mm to 605 mm x to 1200 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring
21	Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float,filling joints, curing and clearing etc. complete. a) Flooring - Antiskid
22	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting
23	Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown or as per Architec selection granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.
24	Providing pantry platform in granite with all necessary cuddapah supports etc complete
25	Sub Estimate No. 2 - Plumbing Work A)SANITARY & C.P. FITTINGS
26	Providing and fixing European type wallhung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size ofincluding soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting& making good walls, floors etc. complete.
27	Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.
28	C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 )
29	Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
30	Providing and fixing chromium plated towel rod 16 mm dia and 75 cm.in length including all accessories complete.
31	C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 )
32	Providing andfixing 450mm x550mm size superiortype Belgium mirrorwith16mmdia. nickel plated towel rod etc. complete..as directed by Engineer in charge
33	Providing and fixing wall hung white wash basin of size 550 x 400 x 195 mm with pillar cock having flow rate up to 6.0 Litr/Minute,C.P.Angular stop cock long thread of Jaquar/Cera/Hindware /Perryware or equivalent make, including SS bottal trap of approved make etc complete as directed by Engineer in charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.)
34	Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
35	Providing and fixing C.P. sink cock with raised J\" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete.\"
36	Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.
37	Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
38	Providing and fixing 25mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].
39	Sub Estimate No. 2 - Plumbing Work(B) SOIL & WASTE( Internal )
40	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
41	Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
42	Providing, laying and fixing P.V.C. pipe of50mm dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
43	Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
44	Providing, laying and fixing P.V.C. pipe of 32mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
45	Sub Estimate No. 2Plumbing Work(C) INTERNAL COLD WATER
46	Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
47	Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
48	Sub Estimate No. 2Plumbing WorkD) EXTERNAL COLD WATER
49	Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
50	Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
51	Providing and fixing Ball cock for 32mm dia.
52	Providing and fixing Ball cock for 40mm dia.
53	Providing andfixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.as directed by Engineer in charge
54	Strainer for 40mm
55	Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres
56	Sub Estimate No. 2Plumbing WorkE) RAIN WATER HARVESTING
57	Providing and fixing P.V.C. Rain water pipes of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall usingapproved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality andnumber,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
58	Sub Estimate No. 2Plumbing WorkF) EXTERNAL DRAINAGE
59	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
60	Providing , laying & fixing ,jointing Eco drain 160 mm SN 4 Nu Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees tees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete.
61	Providing , constructing and fixing 450 mm dia. Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 mm and height of 388 mm with 160 or 200 mm main inlet (s) outlet and 110 and / or 160 mm branch inlets, with 450 mm dia. Ultra shaft pipe of HDPE material having height of 460 mm, having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete.
62	Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
63	Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester.Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33%Percentage of polyester resin: - 66.67%Water absorption (as per ASTM):-0.30%Flammability as per ASTMTensile strength:-115 MPASpecific Gravity at 25 degree centigrade 1.45Izod impact strength:-65KJ/M2Heat defection/distort temperature:-65deg CCorrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mmOutlet pipe size rigid PVC:-80mmGas outlet rigid PVC with Valve: 20mmBacteria immobilization PVC mattes (on all partition)With DRDO TOT licensee and latest batch certificate(month & year of supply) andcapacity as below b) Up to 15 user size (1.0mx1.0mx1.0m), Capacity of biodgester:-1000 liters, Area of top, bottom and side walls: - 6 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - 54Kilogram, Bacteria inoculums quantity: - 400 liters, Minimum thickness of side walls / top and bottom: 4mm, One Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm
64	Sub Estimate No. 3 -Painting workA) POP Wall Punning
65	Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material of Ambuja / Mor Chap or equivalent make ) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc complete
66	Providing and applying TEXTURED paint of approved colour & shade to old and new surface including scaffolding preparingthe surface to finishing with 2 coats etc complete as per direction of Engineer - in charge.
67	Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.
68	Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)
69	Sub Estimate No. 4 - Carpentry Works
70	1) Aluminium FrameProviding and fixingin position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect. Size 50 x 50 x 1.62 mm for corner & Size 50 x 25 x 1.62 mm for Middle
71	Sub Estimate No. 4 - Carpentry Works2)Skinning / Paneling / Boxing Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge.
72	a) 6mm thk Marine Ply
73	b) 9mm thk Marine Ply
74	c) 12mm thk Marine Ply
75	d) 19mm thk Marine Ply
76	Sub Estimate No. 4 - Carpentry Works3)Composite Panal (Interior Wooden Finish)3mm thk
77	Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)
78	4) Providing and fixing 1.5 MM thick Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.)
79	Sub Estimate No. 4 - Carpentry Works(5)Storages Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels3) Shutters made out of 19 mm thick block board &6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside &out side as per below mention. 5) hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment
80	Low height storage with laminate finish (LST)
81	Over head storage laminate finish
82	Full height storage with laminate finish (FST)
83	Low height storage with Veneer finish (LST)
84	Sub Estimate No. 4 - Carpentry Works 6)Wadrobe finish in veneer
85	Sub Estimate No. 4 - Carpentry Works (7) Glazed PartitionProviding & Fixing of OTIC Particion make SL40 i.e. Single glazed modular system consists of Aluminium section of 25402.5 mm thick. All sections duly anodised up to 20-25 microns with 6063-T6 grade and required accessories i.e. glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 40 mm wide with 10mm toughen glass & insertion of Thermoplastic gasket to adhere the glass firm & airtight. The sound reduction Value is from 32 to 35 Db.
86	Sub Estimate No. 4 - Carpentry Works 8) 8mm thk Fix Glazed PartitionProviding and fixing glazed partition made out of 8 mm thk clear glass with designs pattern as shown in drawing. Glass should fixed with required size of wooden beading which finished with 3 coats of melamine polish. Rate including cost of glass edge maching.
87	Sub Estimate No. 5 -Doors Works
88	1) 35mm thk Partly Glazed Partly Solid Door both sideLaminate -Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring / door closer, hinges etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge.
89	2)35mm thk Flush Door one side Composite & one side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
90	3) 35mm thk Flush Door both side Laminate -Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
91	4) 35mm thk Flush Door both side Composite Panal - Providing & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4mm thk. Veneer on both sides as per approved pattern finish with polish. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
92	5) Providing & Fixing of OTIC Particion make Stile Door System width 45 X 75 mm with 6063-T6 /20-25 Microns Anodized Aluminium Sections having door profile sizes of 100 x 30mm, with 10 mm Toughened Glass including Geze make Open Door Closure, 4 Nos of Hinges, SS Lever Handle with Mortice Lock Set and Door Seal
93	6) Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
94	7) Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
95	8) Providing and fixing mild steel grill work for windows, ventilators etc 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
96	9) Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
97	Sub Estimate No. 6 - False Ceiling
98	1) Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
99	2) Acooustical CeilingProviding and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.
100	3) 12.5 mm thk moisture resistance boardM/F Suspended MR Ceiling includes Gypserra™ Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Gypserra™ Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid.Gypserra™ Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Gypserra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}
101	The Gypserra™ Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gyproc® MR (conforming to IS 2095 Part 1:2011/ EN 520:2004, Type-A & H1/ASTM C1396) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape.Serrated section has effective thickness of 2T ( 2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section. All Gypserra™ metal components are patent applied for
102	4) Providing and fixing Wooden rafter at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge
103	5) Providing and fixing Wooden rafter or ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge
104	Sub Estimate No. 7 - Loose Furniture 1) RO Cabin Table Finished with Veneer in table size 2400 mm x 1200 mm x 750 mm) side table (size 1700 mm x 450 mm x 700 mm)
105	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be veneer with melaminepolish. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching veneer all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
106	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved veneer.
107	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
108	Sub Estimate No. 7 - Loose Furniture 2) SRO Cabin Table Finished with Laminate in table size 2100 mm x 900 mm x 750 mm) side table (size 1650 mm x 450 mm x 700 mm)
109	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
110	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
111	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
112	Sub Estimate No. 7 - Loose Furniture 3) Conference table (Size 2400 x 1200 x 750mm)
113	Providing and fixing in position Conference Room Table of approved shape shown in drawing. Table top made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved laminate. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved laminate. Edge of Table finished with 50 X 50 mm T.W. moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved laminate. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50 x 50 mm wooden connecting members.
114	Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved laminate. Sides finished with approved laminate, complete as per detail drawing, as specified and as directed by Architect.
115	Sub Estimate No. 7 - Loose Furniture4) Workstations
116	Modular workstations consist of low ht. partition screen, work tops, Pedastal unit,filing stoarges( only in few cases), key board tray & CPU trolleyas per specifications mentioned below.The profiles of the Aluminium partition frame should be as per the
117	Work top - 25 mm hk. Board with Laminate cut to size & shape as per design & drawings. Edges to be fixed with Teak Wood Lipping & polish matching to laminate
118	Key boardtray & CPU Trolley - Each work station shallhave PVC moulded key board tray & M. S. powder coated CPU Trolley with castors.
119	Pedastal unit - 3 drawer pedastal unit of overall size450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus& 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extens
120	Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,eachworkstation with one tackable board and white board.Screen in front of the table to have frosted glass panel above
121	Work stations - L shape - type -1 of size (1500 x 500 X 750) & (900 x 450 x 750mm)
122	Sub Estimate No. 7 - Loose Furniture 5)FO Cabin Table Finished with Laminate in table size 1500 mm x 750 mm x 750 mm) side table (size 900 mm x 450 mm x 700 mm)
123	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock etc.
124	drawings & also shall include CPU unit as shown in the drawings approved by Engineer-in-charge/Architect. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with an approved laminate.
125	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
126	6) Modular workstations consist of low ht. partition screen, work tops, Pedastal unit,filing stoarges( only in few cases), key board tray & CPU trolleyas per specifications mentioned below.The profiles of the Aluminium partition frame should be as per the
127	Work top - 25 mm hk. Board with Laminate cut to size & shape as per design & drawings. Edges to be fixed with Teak Wood Lipping & polish matching to laminate
128	Key boardtray & CPU Trolley - Each work station shallhave PVC moulded key board tray & M. S. powder coated CPU Trolley with castors.
129	Pedastal unit - 3 drawer pedastal unit of overall size450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus& 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extens
130	Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,eachworkstation with one tackable board and white board.Screen in front of the table to have frosted glass panel above
131	Work stations - L shape - type -1 of size (2650 / 2700 x 500 X 750) & (1000 x 450 x 750mm)
132	Sub Estimate No. 7 - Loose Furniture7) Square / Circular Corner or Side table Providing & arranging in position corner table out of 2\"x2\"T W members with proper joinery & hardware as per approved drawings. The top to be finished with 12mm thk. tinted glass top with bevelled edges. Item to be completed in all respects as per drawings & instructions from EIC/ Architect.Size of table:(450 X 450 X 450 mm) or (450 mm dia)
133	8) Providing & arranging in position centre tables made out of TW members 40 X 75 mm with proper joinert & hardware as per drawing. The top finished with 12mm thk tinted glass with bevelled edges. Item tobe completed in all respect as per drawing & instruction (750 X 750 X 450 mm)
134	9) Security Table Finished with Laminate in table size 1350 mm x 500 mm x 750 mm) side table (size 900 mm x 450 mm x 700 mm)
135	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock etc.
136	drawings & also shall include CPU unit as shown in the drawings approved by Engineer-in-charge/Architect. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with an approved laminate.
137	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
138	Sub Estimate No. 8- Chairs Works
139	1)Executive Chair - Providing and placing in requireed position of Very High Back Chair of approved equiivalant make, chair of size (49.0cm. (W) X 48.0cm. (D) with 75.o cm (D) including necessary approved type and colour fabric complete as per manufacturer specifications and as per instruction of Engineer in charge.
140	2) Executive Chairs - Providing and placing in requireed position Mid Back Chair of approved equiivalant make, chair of size size 50.0cm W X 49.5cm (H) with 75.o cm (D) including necessary approved type and colour fabric complete as per manufacturer specifications and as per instruction of Engineer in charge.
141	3) Conference room chair - Providing and placing in requireed position Mid Back Chair of approved equiivalant make, chair of size 50.0cm W X 49.5cmH with 75.o cm D including necessary approved type and rcolour fabric. complete as per manufacturer specifications and as per instruction of Engineer in charge.
142	4) Staff Chair - Providing and placing in requireed position Mid Back chair of approved equiivalant make the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.BACK SIZE:47.5 cm. x 58.0cmHSEAT SIZE:47.0 cm. W x 48.0 cm. D
143	5) Staff visitor chairProviding and placing in requireed positionVisitor Backor equivalnet approved make the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H)SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.complete as per manufacturer specifications and as per instruction of Engineer in charge.
144	6) Lounge Chair
145	7) Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring /rubberised coir/32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet(fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge.
146	a) Single Seater Sofa
147	b) Three Seater Sofa
148	c) Two Seater Sofa
149	Sub Estimate No. 9-Miscellaneous Works1) L-shape Pelment / Jamblining : (upto 300 mm wide) Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect.
150	a) 1.5 mm thk Laminate Finish
151	b) Veneer Finish
152	2) Soffit Providing and fixing in position 19mm thk. Marineplywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect.
153	a) Laminate Finish
154	b) Veneer Finish
155	3) Soft Board Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect.
156	4) Dust BinProviding & arranging in position dust bins out of perforated(min Size 350 mm dia x 400 mm Height). Item to completed in all respect as per drg & directions
157	5) Wall PaperProviding, fixing, applying by Company Trained Technicians, premium Wall Covering (WallFabric), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge.
158	6)Providing & fixing Artificate like Picture Frame etc. as per shown in drawing & manufacturers specificationPicture Frame
159	7) Providing & fixing Artificate like Artifical Plant, etc. as per shown in drawing & manufacturers specification Plants
160	8) Roller blindsProviding and fixing composite material of High Tenacity Polyester Yarn Fabric with PVC Coating, Aluminium Backing, & Fungistatic Treatment of Hunter Douglas,Serge Ferrari,MAP,Softlite Impex,Mado approved makemanual Roller blinds with end brackets, components, bottom bar & fabric with manual operation and warranty of minimum 5 years and Greenguard Certificate – UL 2818 Gold Certification as per specifications. Fabric to be as per approved sample. manual system to include chain ball operation. Composition: 39% Polyester / 61% PVC with Aluminium Backing,Weight: 290 g/m2 (+/-5%) as per Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A)Fire Retardancy:B-s2,d0/EN 13501-1, CLASS A/ASTM E84., Color: as per selected color Openness factor: 3%, Reflection solar radiation: 9% TO 65%, Light transmission: 2%-4%,Solar Absorption : 22% - 88%,Solar Transmission-3% -13%,Tensile Strength (Wrap/Weft)-160/170 daN / 5cm.All complete as per approval of designer & instruction of Engineer-in-charge.
161	9) Providing, Suppying & Installing of Mobile Storage System consisting of -:1) 4 Nos. of Mobile Unit Double face each of size Length 1830mm x Width 800mm x Height 2150mm.2) 1 Nos. of Mobile Units Single face each of size Length 1830mm x Width 457mm x Height 2150mm.3) 1 Nos. ofFixed Units Single face of size Length 1830mm x Width 457mm x Height 2150mm.The system will be of Knock Down System, Unit will have 5 Nos. adjustable shelves. The unit to have mechanical assisted drive. The whole system should be made of various component each of them should be treated by antirust treatment before applying the approved coloured powder coating. The whole system should be as per the approved drawing and detailed specification mention in the tender document with 12 months Guarantee. The rates coated should be inclusive of all taxes, freifgt and transportation etc complete as per direction of Engineer - in - charge.
162	10)T.W MOULDINGProviding and fixing in position mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. complete as per detail drawing, as specified and as directed by Architect / Engineer
163	a) SIZE 15 X 15 MM
164	b) SIZE 25 X 50 MM
165	c) SIZE 50 X 50 MM
166	11) Wooden Facia Providing & fixing Wooden facia made out of 19mm thk marine plywood and finished with decorative veneer and melamine polish wtc complete as per drawing and direction of Engineer – in - charge.
167	a) 100mm x 75 rmt
168	b) 150 mm x 25 rmt
169	Sub Estimate No. 10 -Electrical work
170	Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
171	Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
172	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
173	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
174	Supplying and erecting Green colour earthwith 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (with Note 3)
175	Supplying and erecting Green colour earthwith 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
176	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
177	Supplying and erectingGreen colour earth with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(with note 3)
178	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
179	Supplying and erecting Green colour earth with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (with note 3)
180	Supplying and erecting Green colour earth with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (with note 3)
181	Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (with note 1)
182	Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
183	Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.
184	Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.
185	Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete.
186	Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
187	Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.
188	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
189	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
190	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
191	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
192	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
193	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
194	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
195	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16/18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
196	Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW
197	Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW (With Note 3) (2 Way Control)
198	Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW
199	Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
200	Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW
201	Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
202	Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
203	Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
204	Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty
205	Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.
206	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.
207	Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
208	Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
209	Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
210	Supplying and erecting storage type water heater 15 litres capacity having standing loss <0.419 kWh / 24 hour / 45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, multi function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH
211	Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.
212	Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of 0.30 Min. PWM & IGBT based, with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS
213	Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, dulycharged with 24 months warranty complete
214	Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
215	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
216	Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
217	Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
218	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
219	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
220	Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
221	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
222	Providing & erecting 4 Pole MCCB, 415V, 100 A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB (with note1)
223	Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as perpecification no. SW-RCCB/RCCB
224	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
225	Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware
226	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP
227	Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
228	Supplying and erecting Aluminum / PVC ROHS complied Non flame propagating under floor ducts/raceways of 200mm Width x 35 mm depth including the connectors and the clamps at required intervals. The ducts shall be in trapezoidal shape tested for 750 N point load suitable for in screed application ,etc.
229	Supplying and erecting under floor junction box of size 250mm x 250mm x 55 mmwith flush finish powder coated appearance complete ,etc
230	Total Work Portion of Sub work 1
231	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
232	Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
233	Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
234	Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.
235	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
236	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
237	Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed,G.S.Tape armoured polythene jacketed having laid in provided trench as perspecification No. WG-TW
238	Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW
239	Supplying, erecting & commissioning MDF Box 50x50 pairs made from min.1.5mm thick MS sheet as per specification no. WG-TW
240	Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW
241	Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete.
242	Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.
243	Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete
244	Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC (For Telephone & Networking)
245	Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
246	Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS
247	Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL
248	Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
249	Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
250	Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
251	Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635mm) as per specification No. WG-NAS/RAK
252	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
253	Total Work Portion of Sub work 2
254	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
255	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
256	Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected
257	Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete
258	Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.
259	Supplying & erecting HDMI Extender Over RJ45 Ethernet Cable Cat 6, 60m/200ft complete
260	Supplying and installing cat-6 LSZH cable suitable for networking as per specification no. WG-COC/NC
261	Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS
262	Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
263	Supply installation commisioning of 3 MP full HD IP Bullet Camera VIDEO COMPRESSION H.264 + VIDEO Resolution 1280 x 720 or above , Frame Rate - above 25-30fps in all resolution, Image Sensor - 1/4\" MP progressive scan CCD/CMOS imager, Lens type - Fixed local or Verifocal , Zoom lens - 2.7-8mm & 4X Digital Zoom, F2.0, Minimum Illumination Colour: 1 lux, B/W: 0.5 lux (at 30 IRE, Image Setting - Compression , color, Brightnrss, sharpness, contrast, white balance, exposure control,blacklight, Audio - Built in Microphone, compressation protocol - IPv4/v6, TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, SSL, FTP, SMTP, DHCP,PPPoE, UPnP, SNMP v2/v3, Bonjour, DNS, DDNS, IEEE 802 1X , Qos, NTP, Security - User accountand password protection, HTTPS, IP address Filtering, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed FTPDisable Operation Conditions - 0 ºCto 50 ºC Casing/ Housing - outdoor camera (in open sky) INGRESS PROTECTION, IP 66, IMPACT RESISTANCE- IK 10 Box orDome. Three Year Warranty
264	Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8\" Progressive Scan CMOS,Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream,Frame rate : minimum 25 fps at all resolutions,WDR : minimum 120 dB Wide Dynamic Range,ONVIF profile conformant,minimum IR distance : 50m,Lens Type : 2.8/4/6 mm Lens, fixed focal,Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m.Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°.Power Supply : Support 12VDC & PoE,IP67, IK10 - Vandal Resistant.Built in micro SD/SDHC/SDXC card slot of minimum 128 GB,Built in microphone.minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out× 1.Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance.Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection.Operating temperature ( -30 to 60° C ) .Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,
265	Supply installation commisioning of 4K Embedded Network Video Recorder 16 Channels - MAIN PROCESSOR - Quad -core embedded processor, OPERATION SYSTEM - Embedded LINUX, AUDIO INPUT -1 Channel, OUTPUT -1 Channel output RCA, INTERFACE - 2 HDMI , 1 VGA, RESOLUTION -3840 X 2160, OSD - Camera title , Time:Video Loss; Camera lock ; Motion detectionRecording, COMPRESSION- H.265/ H.264/MJPEG/MPEG4, RECORD BIT RATE- 320 Mbps RECORDING MODE Schedule Regular/ Continous, Motion detection, Alarm , Manual , Stop, TRIGGER EVENTS - RecordingPTZ Tour alarm; Video Push: Email FTP Snapshot; Buzzer, VIDEO DETECTION - Motion Detection ALARM INPUT, ETHERNET - 1 RJ -45 PORT (10/100/1000Mbps),MAXIMUM NUMBER OF USERS -128 users NETWORKTHROUGHOUT- Input 320 Mbps; Output 320 Mbps , SMART PHONE COMPATIBILITY - iPhone ;iPad; Android, INTERNAL HDD 4 SATA Ports, EXTERNAL HDD -1 eSATA Port , USB PORTS - 3, EMISSIONS - FCC, SAFETY EU EN 60950-1, UL Listed to UL/CSA 60950-1, ROHS Compliant ( Three Year Warranty)
266	Supplying Installing configuring and commissioning of 32 LED full HD smart television set with all accessories and wall mount stand HDMI cable of required length etc Complete 3 year warranty) (NON CSR rate approved by SE PREC Pune vide letter 787 dated 09/03/2021)
267	Supply Erecting testing and commisioning of 4TB HDD Survillance ciard disk oduct Dimensions 10.2 x 2.5 x 15.2cmitem mode numbersST4000VX007 Memory Storage Capacity 4TB Flash memory installed size 4 TB Digital Storage Capacity 4TB Hard Drive Rotation Speed 5900RPM Survillance, DVRs, Hardware Interface SATA 6.0 gB/S, Graphics Card Interface PCI-E, Compatible Devies Desktop Buffer size 64 MB
268	Total Work Portion of Sub work 3
269	Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
270	Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
271	Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.
272	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
273	Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system
274	Sub Estimate No. 11 -Fire Fighting work
275	Supplying, erecting testing and commissioning heat detector with combination \"ROR and Fixed Temp.\" complete as per specification no. FF-FAS/HD
276	Supplying, erecting testing and commissioning optical type smoke detector onsuitable back box with necessary connections complete as per specification no. FF-FAS/SD
277	Supplying, erecting, testing and commissioning manual call point (Pill box) withbreak glass push button and flip abort switch or agent release switch in metal enclosure complete as per specification no. FF-FAAS/MCP
278	Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR
279	Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI
280	Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (Note increase rate by 2% for FRLS)
281	Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS/FACP
282	Supplying and erecting ABC powder type fire extinguisher as per IS 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.
283	Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.
284	Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark on provided stand/ wall hook.
285	Supplying & installation auto glow (Viewing upto 15 mtr length) fire signages viz fir hydrant Fir Extinguishers Fire Exit Fire door Fire house box ect. Size of 600x200 mm

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Electrical Industry Tenders

Electrical Product Tenders

Electrical Products Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Renovation For Mpcb Office At Udyog Bhavan, Sangli, Mumbai-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair And Renovation For Mpcb Office At Udyog Bhavan, Sangli, Mumbai-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us