Name of Work : Addition and Alteration work at B.No. 8 CM House, Jaipur. (Civil work)
Sl. No.
Item Description
1
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)
2
Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes.
3
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar.
4
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand)
5
Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. : Applying Epoxy primer on the exposed steel bars. : Applying Epoxy hardener and resin mix (as per manufectured\"s specification) on concrete and steel bars with brush. : Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. : Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. : Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect.
6
Coloured Araish work 1 : 2(1-lime putty : 2-Zikki ) over lime plaster or plain back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The kara plaster of not more than 6 mm thick is to be left for maximum of 3 months to appear the shrinkage & temperature cracks over the kara plaster 2 mm layer of grinded lime putty is to be done and is to be rubbed gently by Akik stone then inserting the design of colour border/ flowers/pictures etc including desired colour stone pigment to match the existing design/pattern after this, applying Khopra paste & rubbing with cloth to give a uniform picture. The work to be executed strict as per direction of Engineer Incharge
7
Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
