Replacement Of Acsr Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Kashipur Industrial Feeder Emanating From 33/11 Kv S/S Danpur Under Edd-Ii, Rudrapur On Turnkey Basis Under The Head Of Capital (S.I.). ( Rates Should Be Quoted Without Gst), Danpur-Uttarakhand

TDR : 48157750

Tender Notice
BOQ

Expired

Danpur , Uttarakhand

Tender Brief : Replacement Of Acsr Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Kashipur Industrial Feeder Emanating From 33/11 Kv S/S Danpur Under Edd-Ii, Rudrapur On Turnkey Basis Under The Head Of Capital (S.I.). ( Rates Should Be Quoted Without Gst)

Document Fees
₹ 11800 /-

EMD
₹ 412000.0 /-

Tender Value
Refer document

Submission Date
26-03-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Annexure-A (LABOUR CHARGES)
2	Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.
3	Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approced drawing.
4	Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line
5	Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement :4 graded stone 20mm nominal size: 8 coarse sand) block including cost of Cement, sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.
6	Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.
7	Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps a s per RESPO manual.
8	Grouting of pole in size 0.45x4.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO construction manual
9	Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.
10	Dismantling of existing HT line including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR weasel)
11	Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.
12	Guarding of LT/11 KV Line over (Telephone / Road / L.T. line crossing with 6/8 SWG G.I. wire including fixing of guarding channel/angle as per RESSPO manual.
13	T-off Connection Complete 11 KV line
14	Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km)
15	Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km)
16	Headload cartage of SP-55 Pole from road to site (distance 1-3 Km)
17	Headload cartage of small material(distance 0-1 Km)
18	Straightning of tilted existing Poles of STP SP 55
19	Fixing of IPC with AL. Bail for Earthing.
20	Fixing of 11 KV 90KN Tension Clamp B&IPC
21	Fixing of 11 KV Suspension Ties.
22	Fixing of 11 KV IPC for CC to CC Conductor.
23	Fixing of 11 KV IPC for CC to Bare Conductor.
24	Opening of 11 KV Jumper & making again of section pole.
25	Fixing, tightening and nozzeling of stay with pole and stay set on required tension
26	Laying Spreading, Stringing AAAC Conductor.
27	Back Carriage of scrap material
28	Route cleareance by cutting of tree branches / proning, lopping and chopping of trees for L.T., 11 KV & 33 KV line.
29	Annexure-B (SUPPLY ITEMS)
30	Supply of Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980(Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
31	Supply of MS Channel 100x50 mm
32	Supply of 11 KV Polymer Disc Insulator (B&S) Type
33	Supply of 11KV Polymer Pin Insulator with PIN.
34	Supply of Disc Fit. B&S Type Dog/Racoon 70KN
35	Supply of X-Arm Angle 65x65x6 mm V Type 11 KV
36	Supply of Earthing Rod MS 25x2500 mm
37	Supply of GI Wire 5 mm/6 SWG
38	Supply of Stay Set GI 16x1800 mm
39	Supply of Stay Wire GI 7/4.0 mm 7/8 SWG
40	Supply of Holding Clamp for SP-55 with N/B
41	Supply of X-arm Clamp for ST Pole SP-55 with N/B
42	Supply of Stay Clamp for SP-55 with Nutt & Bolt
43	Supply of Bolt & Nuts off size
44	Supply of 11 KV IPC for Covered to CoveredConductor.
45	Supply of 11 KV IPC for Covered to Bare Conductor.
46	Supply of 11 KV mid span Jointing Kit
47	Supply of IPC with Al. BAIL for Earthing 11 KV
48	Supply of 11 KV Sus. Ties/Cable Ties on Pin Insulator
49	Supply of 11 KV AAAC Covered Conductor AL-59, 99 Sq.mm.
50	Supply of 11 KV Tension Clamp with BAIL & IPC

Also Visit

Tenders

Uttarakhand Tenders

Electrical Industry Tenders

Electrical Product Tenders

Conductor Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Replacement Of Acsr Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Kashipur Industrial Feeder Emanating From 33/11 Kv S/S Danpur Under Edd-Ii, Rudrapur On Turnkey Basis Under The Head Of Capital (S.I.). ( Rates Should Be Quoted Without Gst), Danpur-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Annexure-A (LABOUR CHARGES)
2	Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.
3	Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approced drawing.
4	Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line
5	Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement :4 graded stone 20mm nominal size: 8 coarse sand) block including cost of Cement, sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.
6	Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.
7	Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps a s per RESPO manual.
8	Grouting of pole in size 0.45x4.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO construction manual
9	Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.
10	Dismantling of existing HT line including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR weasel)
11	Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.
12	Guarding of LT/11 KV Line over (Telephone / Road / L.T. line crossing with 6/8 SWG G.I. wire including fixing of guarding channel/angle as per RESSPO manual.
13	T-off Connection Complete 11 KV line
14	Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km)
15	Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km)
16	Headload cartage of SP-55 Pole from road to site (distance 1-3 Km)
17	Headload cartage of small material(distance 0-1 Km)
18	Straightning of tilted existing Poles of STP SP 55
19	Fixing of IPC with AL. Bail for Earthing.
20	Fixing of 11 KV 90KN Tension Clamp B&IPC
21	Fixing of 11 KV Suspension Ties.
22	Fixing of 11 KV IPC for CC to CC Conductor.
23	Fixing of 11 KV IPC for CC to Bare Conductor.
24	Opening of 11 KV Jumper & making again of section pole.
25	Fixing, tightening and nozzeling of stay with pole and stay set on required tension
26	Laying Spreading, Stringing AAAC Conductor.
27	Back Carriage of scrap material
28	Route cleareance by cutting of tree branches / proning, lopping and chopping of trees for L.T., 11 KV & 33 KV line.
29	Annexure-B (SUPPLY ITEMS)
30	Supply of Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980(Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
31	Supply of MS Channel 100x50 mm
32	Supply of 11 KV Polymer Disc Insulator (B&S) Type
33	Supply of 11KV Polymer Pin Insulator with PIN.
34	Supply of Disc Fit. B&S Type Dog/Racoon 70KN
35	Supply of X-Arm Angle 65x65x6 mm V Type 11 KV
36	Supply of Earthing Rod MS 25x2500 mm
37	Supply of GI Wire 5 mm/6 SWG
38	Supply of Stay Set GI 16x1800 mm
39	Supply of Stay Wire GI 7/4.0 mm 7/8 SWG
40	Supply of Holding Clamp for SP-55 with N/B
41	Supply of X-arm Clamp for ST Pole SP-55 with N/B
42	Supply of Stay Clamp for SP-55 with Nutt & Bolt
43	Supply of Bolt & Nuts off size
44	Supply of 11 KV IPC for Covered to CoveredConductor.
45	Supply of 11 KV IPC for Covered to Bare Conductor.
46	Supply of 11 KV mid span Jointing Kit
47	Supply of IPC with Al. BAIL for Earthing 11 KV
48	Supply of 11 KV Sus. Ties/Cable Ties on Pin Insulator
49	Supply of 11 KV AAAC Covered Conductor AL-59, 99 Sq.mm.
50	Supply of 11 KV Tension Clamp with BAIL & IPC

Replacement Of Acsr Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Kashipur Industrial Feeder Emanating From 33/11 Kv S/S Danpur Under Edd-Ii, Rudrapur On Turnkey Basis Under The Head Of Capital (S.I.). ( Rates Should Be Quoted Without Gst), Danpur-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us