|
| 1 | Replacement of roof sheet over 20 No racewaysat trout fish farmPatlikulah,Distt.Kullu(H.P) (SH:- Construction of operator room inside RASat trout fish farmPatlikulah) |
| 2 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 3 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 4 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sidesas per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 6 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. Complete as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 7 | Providing and fixing aluminium casement windowas fastener of required length for aluminium windows with necessary screws etc. Complete Anodized (AC 15 ) aluminium as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 8 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge Anodized (AC 15 ) aluminium as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 9 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required Group-C as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 10 | Supplying and fixing G.I. Modular box 3 Module with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connections etc. as required. as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 11 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:- Finolex, KEI, Anchor, Plaza as approved by Engineer -in -charge . 2x1.5 Sq. mm + 1X1.5 sq.mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 12 | Supplyinganderection of 40/50/63 amps, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of pole Double pole in the existing MCB DB complete with connections etc. as required:-Make L&T, Hager,ABBor its equivalent as approved by Engineer-in -charge. as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 13 | Supplying and fixing bakelite batten/angle holder including connections etc. as required as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 14 | Supplying and Fixing LED Battan 36 watt High quility aluminium extruded with decorative end caps of superior quality ( Wipro Make ) as per item code LL22-511-XXX-65-G1 as required. Complete in all respect and as approved by the Engineer-in -Charge.Make-Wipro,Jaquar,Philips or its equivalent as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
