|
| 1 | Solar modules using 335/340 Wp, 24 V DC poly- Crystalline modules. Total plant capacity 1 Kwp.UTL/Tata Power Solar/Vikram Solar/Adani Solar or equivalent MNRE approved |
| 2 | 24 V, 1 KVA , solar hybride inverter MPPT/PWM based make UTL/Luminous/Tata Power Solar/Vikram Solar Solar or equivalent MNRE approved |
| 3 | 12 V, 100AH c10 rating battery with 5 years warranty. Make UTL/Exide/Luminous/Microtek |
| 4 | Module Mounting structure made of MS angles and pipe suitable to mount 03 nos panel with foundation. |
| 5 | Supplying of fixing of Array junction box with DC SPD Type-II and string fuses/MCBs. |
| 6 | Supplying and drawing of 2 C x 4 Sqmm Solar DC cable 1.1 KV Grade XLPO insulated copper (Black & Red) make KEI/Polycab/Finolex |
| 7 | Supplying and drawing of 2 C x 6 Sqmm Solar DC cable 1.1 KV Grade XLPO insulated copper (Black & Red) make KEI/Polycab/Finolex |
| 8 | Transportation of equipment to BOP installation & maintenance charges |
| 9 | Supply, Installation, Testing& Commissioning of500 LPD Solar Water Heating System ,Stand frame : Galvanized powder coated with 27 degree, Vacum tube size : 58/1800 mm, Outer tank diameter :550 mm, Inner tank diameter : 450 mm,Tank capacity : 500 Ltr , Temperature : 65 degree C to 85 degree C, Tank insulation : PUF 50 mm (Polyurethane foaming), Inner tank material : stainless steel with ceramic coated, Outer tank material : Galvanized powder coated/ stainless steel, Method of welding : MIG welding technology, Type of grommets : Silicon washer, Type of circulation : Thermo siphon, Electrical back-up: 2 KW, Type of fasteners :Stainless steel/ Galvanized, Collectors should confirm to BIS and approved as per MNRE specifications. (Quoted rates shouldinclude the cost of installation, testing and commissioning of the complete system at site and all taxes including in rates nothing will be paid extra ) |
| 10 | Structural steel work rivated bolted or welded in built up section , trucesse and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, i/c all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fiitings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(i)25 mm nominal outer dia pipes |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, i/c all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fiitings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(ii)20 mm nominal outer dia pipes |
| 13 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(i)25 mm nominal bore |
| 14 | Providing and fixing brass stop cock of approved quality (i)20 mm nominal bore |
| 15 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (500 ltr x 1nos = 500 ltr tank) |