Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-04-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-05-2025 |
| 2 | 17-04-2025 | Corrigend | Date | 24-04-2025 |
| 3 | 09-04-2025 | Corrigendum3 | BOQ | 18-04-2025 |
| 4 | 07-04-2025 | Corrigendum2 | Date | 18-04-2025 |
| 5 | 28-03-2025 | Corrigendum | Date | 15-04-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed. |
| 3 | Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed. |
| 4 | All as per item No 3 here in before but 20 mm bore complete all as specified and directed. |
| 5 | Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition)of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge. |
| 6 | Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete as specified and directed. |
| 7 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etccomplete all as specified and as directed. |
| 8 | Demolition of concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specially provided foretc complete all as specified and directed. |
| 10 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required (Internal dia of pipe in 100mm) complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work andprecast concrete articles, complete all as specified and directed. |
| 12 | S & F Rotational moulded polyethylene 500 ltrs water storage tanks (cylindrical vertical with closed top ) triple layer ISI marked including dismantling andhoisted and fixed in position etc completeall as per specified and directed. |
| 13 | M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors ISI marked complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | All as per serial item 13 here in before above but 20 mm bore complete all as specified and as directed. |
| 15 | Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified(i) Cleaning of pipe is included in ser No 3 & 4 here in before(ii) Rates quoted by the contractor deemed to be included S & F new fittings as required |
| 16 | All as per serial item 15 here in before but 20 mmbore complete all as specified and as directed. |
| 17 | S & Fin repair 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut ISI marked complete screwed to iron pipe or brass ferrule complete all as specified. |
| 18 | S & F in repair 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwedboth ends for iron pipe ISI marked complete all as specified and as directed. |
| 19 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminate PVC sheet, reinforced with MS square tube fixed in opening with smooth finish complete as per manufacturer\"s specifications and as directed by Engineer-in-Charge. |
| 20 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | S&F, butt hinges, 100 mm long extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and as directed. |
| 22 | S&F aluminium handles,150 mm size cast type anodised and fixed complete all as specified and as directed. |
| 23 | S&Faluminum, anodised, 150 mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 24 | S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc including make good complete all as specified and directed. |
| 25 | S & F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc including make good complete all as specified and directed. |
| 26 | M & L for providing cement concrete 1:2:4 Type B-1 (using 20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | M & L for PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in filling back side of pressed steel door frames complete all as specified and directed. |
| 28 | S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | S & F 200 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | S & F 100 mm size mildsteel butt hinges medium weight cold rolled and fixed with screws or welding where required complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | S & Fmild steel presssed handle 150 mm long oval types stove enamelled black complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | S&F floor door stopper of alluminium alloy body and tongue anodised with hard drawn steel spring over all length 140mmcomplete all as specified and as directed. |
| 35 | S&F Aluminium Anodized powder coated aluminium frame for doors , windows, ventilators, partion wallwith one or more rebates including joining cleat for fixing etc completet all as specified. (thikness of powder coating is 50 micron) complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for glass pan without sashbar, aluminium sections weighing 0.55kg/m including necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No, handle - 1 Nos in each window, hinges, aluminium snap beading screws complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for wire mesh without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No, handles - 2 Nos in each window, hinges, aluminium snap beading screws complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Supply and fixing7mm thick aluminium grill of make \" Deco grillDG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | S&F 4.0 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified and directed. |
| 40 | S&F4.0 mm thick Figured glass, pin head typeand glazing with aluminium beadding screws or oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified and directed. |
| 41 | S & F Stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staplesand fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed. |
| 42 | M&L for gunniting to RCC works in column,beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC(loose concrete) including plasterand cutting of steel barincluding plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka.Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcmand applying 25mm to 100 mm thick (avg thickness )gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) with plastering(1:4) using ordinary port land cement of 43 grade over wherever required at any height, complete all as specified and directed by Engineer-in-Charge. Note:-(i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with.(ii) Additional reinforced TMT barswhere incorporated in work and including 20mm thick cement plaster in 1:4 to be included in quoted rate (iii)Work to be carried out as in patches as directed by Engr-in-charge.(iv)Rate for steel scaffolding as directed to be included in quoted rate.(v) All demolished material removed from MOD land completely. |
| 43 | M&L for 10 mm thick cement plaster with readymix plaster (as per manufaturer\"s instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:-1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE)2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill. |
| 44 | M&L for 15 mm thick cement plaster with readymix plaster (as per manufaturer\"s instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:-1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE)2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill. |
| 45 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for treatment of sunken portion of slab in bathroom/toilet complete as mentioned below all as spfd and directed:-(i) Taking down carefully existing sunken portion in bathroom/toilet by taking out plaster, concrete/brick bat filling/tiling including plubming from the sunken floor and wall upto RCC slab. Roughing the surface with wire bursing cleaning and washing with water etc and removing the rubbish to a distance exceeding 5mm but not exc 1 km and deposited where directed.(i) Cleaning the concrete surface of sunken portion of slab as obtained alter demolition/taking down of existing sunken portion of slab thoroughly with wire bruses, washed and dried.(iii) checking the sunken slab by ponding test with water till total elimination of leakage/seepage/dampness all as spfd in SSR part-l (after ascertaining location of leakage/dampness carrying out treatment pressure grouting shall be operated at the required locations. (iv) Provide 50mm thick (average) PCC 1:2:4 mixed with water proofing compound as per manufacture instructions shall be provided at the bottom of sunken portion with proper coving on sides and 15mm thick cement plaster 1:4 with water proofing compound on sides. PCC and plaster shall be carried out at same time over two coats of polyurethane based chemical treatment as per manufactures instructions complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F 100 mm bore `spun pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | All as per item No 47 here in before above but fixed to walls complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | S&F in repair of 75 mm bore cast iron drain drain/waste/vent pipes fixed to wall, floor jointed with lead joints including dismantling of old cast iron drain,waste, vent pipe of any description , jointed with any material complete all as specified and as directed by the Engineer-in-Charge. . |
| 50 | S & F cast iron floor trap with granting of 75 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed. |
| 51 | S & F cast iron floor trap with graating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed. |
| 52 | S & F 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) fitted with access door complete all as specified and directed. |
| 53 | S&F in repair ofCast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 54 | S&F in repairvitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed. |
| 55 | S&Fin repair 15mmdia bore cast copper alloy fancy type mixer pillartape for cold and hot water complete all as specified and directed. |
| 56 | M & L for 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | S & F32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 58 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm etccomplete all as specified and directed. |
| 59 | S&F bib tapof CPfancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and directed. |
| 60 | S&F angle valves CP screwed down high pressureof fancy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs complete all as specified nad directed. |
| 61 | S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed. |
| 62 | S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed. |
| 63 | S&F for Brass CP mixer for mixing hot and cold water for 15mm bore dia pipes, screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | S&F in repair kitchen sink with drainage board made outof 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarfwall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed. |
| 65 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. |
| 66 | S&F in repair of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and as directed. |
| 67 | S&F in repair of (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 68 | S&F in repairs stainless steel curtain rod of dia 25 mm complete as approved complete all as specified and directed. |
| 69 | S&F Stainless steel bracket with finels for holding curtain rodes of dia 25 mm as approved complete all as specified and directed. |
| 70 | S&F for stain less steel kitchen plate rackSize 24 inchx 30 inch size complete as directed by Engr -in-Charge. |
| 71 | S&F in repair vitreous china wash down watercloset pal (pedestal pattern) white (excluding fixing bolts flushing cister and slush pipe) with seat cover with CP screw complete all as specified and directed. |
| 72 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe includingcement concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed. |
| 73 | S & F in repair PVC low level cistern of 10 litre capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle etc complete all as specified and directed. |
| 74 | S&Fin repair CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed. |
| 75 | S & F 110 mm bore of pipe PVC (SWR) pipes double socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and as directed. |
| 76 | S & F 110 mm bore of pipe PVC (SWR) bends with access door of any radius / shoefixed to PVC pipes complete all as specified and as directed. |
| 77 | S&F in repair of glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete complete all as specified and as directed. |
| 78 | M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsover 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 79 | All as per Srl item No 78 here-in-above but skirting over 10 mm thick cement mortar 1:4 complete all as specified and directed. |
| 80 | S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed. |
| 81 | S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 32 mm bore ISI marked (Spout pipe for sunken portion) complete all as specified and as directed. |
| 82 | M & L for brickwork with subclass `B’ bricks, in straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 83 | M & L for mild steel round bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming relevant IS complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner) complete all as specified and directed.Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:-(i)Adequate lap length shall be provided as per IS-456-2000.(ii) Reinforced TMT bars where incorporated in work will be paid under item no 4&5.(iii) The work shall be carried out upto four storied building with scaffolding. |
| 85 | M&L for providing and applying corrosion resistance non-shrink free flow, cementitious one component Micro-concrete with average thickness 75mm having compressive strength (BS 4551-80-60) 50 MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm2 @ 28 days, Flexural strength (ASTM C 348)-9 epoxy bonding agent TM bond EP thermax having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)- 11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C pouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate etc including all tools and tackles as per accepting office, complete all as specified and directed by Engineer-in-Charge.Make : BS-66 Musi\"c of Thermax/Webac Chemicals/Chemco System or as approved by Accepting Officer. Note: Shuttering and Scafolding rate deemed to included in same item. Height of building from 15 mtr to 20 mtr. No extra claim by contractor for same. |
| 86 | M&L for 20mm thick granite (of any type)work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like over 15mm thick screed bed in CM 1:6including pointing in white cement 1:2using marble dust with admixture of pigment to match with shade of graniteetccomplete all as specified and directed. |
| 87 | Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed. |
| 88 | Dismantling boarding, any description,any description,fixed in any position with nails etc complete all as specified and directed. |
| 89 | S&F factory made solid PVC door frame/chowkhat size 50mmx47mmfixed in opening for cupboard with smooth finish complete as per manufacturer\"s specifications and as directed by Engineer-in-Charge. |
| 90 | Supply and fixing 6mm thick pvc ply with suitable fully threaded steel screws etc on the backing of rack, drawer, cupboard, kitchen cabinet under kitchen counter etc all complete as per direction of Engineer-in-charge. |
| 91 | S& F 18 mm solid PVC ply of 1st quality of approved colour one side and white another side fixed with \"L\" SS button fixed with screw as a shelfcomplete all as specified and directed by Engineer-in-charge. |
| 92 | S& F 18 mm solid PVC ply of 1st quality of both side prelaminated colour fixed as a shutter with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge. |
| 93 | S & F Brass 4 lever locks, cupboard, grade I, size 50 mm complete all as specified and directed. |
| 94 | S&F Magnetic catcher for Wardrobe, Cub-boards etc complete all as specified and directed.. |
| 95 | Supply and fixing stainless steel fancyGrade 304 handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 96 | Supply and fixing heavy type telescopic drawer channels HETTICH or equivalent 500 mm long with necessary screws etc. complete as per approved and directions of Engineer-in- charge. |
| 97 | S&Faluminum, anodised,100 mm long barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 98 | S&F,butt hinges, 100 mm long extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed. |
| 99 | Dismantling of wrought iron orMild Steelwork of any description complete all as specified and directed by Engineer-in-Charge. |
| 100 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge. |
| 101 | S & F hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kgISI markedcomplete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F in repair Aluminiumn door seal width of 1.50 inch with nylon brush fitted with screw complete all as specified and as directed. |
| 103 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed. |
| 104 | M&L brushing neat cement slurry with 3.0 Kg of cement per sqm and complete all as specified and as directed. |
| 105 | M&L for machine cutkota stone slab flooring 20-22 mm thick over 20mm thick cement screed base in CM 1:6 laid and mirror polish to give high gloss finish, jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and as directed |
| 106 | M&L for Kota stone slab 18-20 mm thick in riser of step and skirting, dadoo pillar laid over10mm thick rendering in CM 1:6 complete all as specified and directed. |
| 107 | M&L for surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard soil and getting out , all as specified and directed. |
| 108 | M&L for hardcore (broken stone of guage n exc. 63 mm depositing spreed and levelled in layers n .exc 15 cm thick) watering and ramming to a truecomplete all as specified and directed. |
| 109 | M&L for 100mm thick PCC typeD-2(1:4:8) (using 40 mm graded aggregate) as in sub base to paver block complete all as specified and directed |
| 110 | M&L forpre-cast concrete rubber moulded glossy finished interlocking paver Blockof 80 mm thick M-40 grade any colour (as approved) and design over sand cushioning complete includingwith using grey cement and pigment any shape and size confirming to IS-15658-2006 complete all as specified and directed. |
| 111 | Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed. |
| 112 | M & L for Rolled Steel section(Fe -410, Grade E-250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 113 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, complete all as specified and directed. |
| 114 | Complete taking down/demolition carefully any type of existing roof treatment i.e. mud puska, brick coba, brick tiles, any type of tiles, PCC, plastering, leeping etc. of any type and thickness varying from 20mm to 125mm in roofs including cleaning the surface after removal (removing the rubbish) complete all as specified and as directed.Note:- Rate ofremoval of debris out side from MoD land deemed to be included in the same item. |
| 115 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and slurry 1:3complete all as specified and as directed. |
| 116 | M&L for min 25 mm thick cement concrete (1:2:4) type B-O (using 12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 117 | M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note - WPC shall be measured and paid separately. |
| 118 | Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge. |
| 119 | Material and labour for roof top surface for roof treatment using application of water proofing treatment by authorised applicator complete all as specified and as directed and comprising of the followings:-(a) Preparation of roof top surfaces and cleaning all the dust and loose material by brush/blower/grinder including removing of vegetation/plantation from the surface andproviding and applying single component elastic cold applied polyurethane modified acrylic roofing system, co-elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having sun reflectivity index (SR) of 109 on top of concrete roof surfaces. (b) All cracks up to 3 mm at corner joints, channel and parapets shall be treated with crack seal. (c) Applying three coats including one coat of primer of polyurathane membrane having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats of polyurathane membrane @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. |
| 120 | (d) The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge (Note : 6 Hrs interval between two coat shall be maintained). (e) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Notes :- (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) Checking the roof slab by any method as per standard engineering practice till total elimination of leakage /seepage / dampness shall be removed by the method as per manufacturers instructions. (iii) Necessary scaffolding, props, support wherever required deemed to be included in quoted rates as the work shall be executed at height varrying from 10-20 mtrs |
| 121 | M & L for rendering 5 mm thick on ceiling on fair faces ofbrick or concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 122 | M & L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall, complete all as specified and directed. |
| 123 | M&L for preparation of new plastered surface of walls and applying two coat of exterior weather proof water base emulsion paint (APEX) of any color complete all as specified and directed.Note:- Quoted rate shall be deemed to be included for work in buildings/structure upto 15mtr height complete all as specified and directed. |
| 124 | M&L for complete removal of old existing treatmentof walls surfaces and applying a coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paperand applying two coat of exterior weather proof water base emulsion paint (APEX) of any color all as specified & directed.Note:- Quoted rate shall be deemed to be included for work in buildings/structure upto 15 mtr height. |
| 125 | M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed. |
| 126 | M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall, complete all as specified and directed. |
| 127 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying twocoat of synthetic enamel paint over a coat ofpink primer etccomplete all as specified and as directed. |
| 128 | M & L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 129 | M&L for preparation of old paintedwooden surfaces over 10 cm width or girth and applying onecoat of synthetic enamel paint etccomplete all as specified and as directed. |
| 130 | M & L preparation of old painted surface of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed. |
| 131 | Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed. |
| 132 | Material & Labour for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat pvc conduit), medium duty not less than 20 mm dia concealed in wall/fixed with all fittings including tees , junction boxes, modular GI gang box & provision for modular box and modular cover of suitable size for mounting modular switches , sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 sqmmcomplete all as specified & directed by Engineer -In-Charge.Note: 1) Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate.2) Rates are deemed to be inclusive of Modular GI gang box and cover plates of any module & Qty as required on site. |
| 133 | All as per Srl item No 132 here-in-before above but one light point/call bell controlled by one single pole switch and socket. |
| 134 | All as per Srl item No 134 here-in-before above but one fan/exhaust fan point controlled by one single pole switch. |
| 135 | All as per Srl item No 134 here-in-before above but one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm. |
| 136 | All as per Srl item No 134 here-in-before above but 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size. |
| 137 | All as per Srl item No 134 here-in-before above but one 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size. |
| 138 | Supply and Fixing in replacement of modular switches 1 way, 6 Amp 1 module complete all as specified and directed by Engineer -In-Charge. |
| 139 | Supply and Fixing in replacement of modular switches 2 way, 6 Amp 1 module complete all as specified & directed by Engineer -In-Charge. |
| 140 | Supply and Fixingin replacement of modular Socket, 6A - 2/3 pin combined 2 module with shutter, complete all as specified and directed by Engineer-in-Charge. |
| 141 | Supply and Fixing in replacement of modular switches 1 way, 16 Amp 1 module complete all as specified & directed by Engineer - In-Charge. |
| 142 | Supply and Fixingin replacement of modular Socket 6A/16A - 2/3 pin combined 2 module with shutter, complete all as specified & directed by EIC. |
| 143 | S&F in replacement of Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps,complete all as specified and directed. |
| 144 | S&F Fan in replacement of modular fan regulator 4 step, 2 module, complete all as specified and directed by Engineer-in-Charge. |
| 145 | S&F in replacement of Modular Bell push 6A 1 module,complete all as specified and directed by Engineer -in-Charge. |
| 146 | S&F in replacement of Ding Dong AC. 230 volts, single pole,complete all as specified and directed by Engineer - In-Charge. |
| 147 | Supply & Fixing in replacement of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified & directed by Engineer - in-Charge. |
| 148 | M&L for Taking out the unserviceable wall mountedPanel boardincluding all connection and supply,installation, commissioning and testing of LT panel, indoor type, double door, IP 54 Protection, CPRI Approvedbase frame mounted dust proof and vermin proof with bus bar of 400 Amps current capacity to accommodate 3 Phase, 415Volt with suitable aluminium busbar designed as per relevant IS connectedto busbar by aluminium strip of suitable Size, fabricated out of 3.15 mm thick CRCA sheet for outer chamber and 2 mm thick for partition and doors and painting with seven tank process with twin shutter closing, locking arrangements and with 2 nos earthing sprout connectors complete and fixed in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation 40 cm above ground levelincluding provision for fixing of MCCB 250A, 25 KA, 4Pole -1 Nos (Incomer), Digital VAF Meter, LED Indication Lamps, CT\"s etc and outgoing MCCB 200A, 25KA, 3 Pole-2 Nos, outgoing MCB 40 A, 10 KA, 4 pole - 2 nos, along with spare space for fixing of 01 Nos MCCB complete control wiring for the above accessoriesall as specified and as directed. |
| 149 | Supply and fix in replacement of factory made epoxy polyster powder coated VTPN distribution board8 waywith incomer MCCB of 200Amps, 4 pole, 36KA, fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-54 protection) fixed on wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incomingand 6 outgoings complete all as specified and confirming to IS: 8623 complete all as specified and directed. Note: (i) Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. |
| 150 | Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incomingand 6 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. |
| 151 | S&F in repalcement of MCB SP 6 to 32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge . |
| 152 | S&F in repalcement of MCB SPN 40 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge . |
| 153 | S&F in repalcement of MCB SP 63 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge. |
| 154 | S& F in replacement of MCCB 200Amps, 36 KA, 4 Pole, with thermal and megnetic release setting, including spreader, complete all as specified and directed by Engr-in-charge. |
| 155 | S&F in replacement of submain wiring withunsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and as directed.Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 156 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated complete all as specified and directed. |
| 157 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised iron wire 4sqmm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated complete all as specified and directed. |
| 158 | S&F in replacement of LED retrofit tubelight, 4 ft longof 20 watt, complete all as specified and directed by Engineer-in-Charge. |
| 159 | S&F in replacement of LED2 ft retrofit tubelight of 10 watt, complete all as specified and directed by Engineer-in-Charge. |
| 160 | S&F in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge. |
| 161 | S&F LED Bulb 12 watt E-pin,complete all as specified and directed by Engineer-in-Charge. |
| 162 | S&F in replacement Powder coated pressure die cast aluminium compact LED building light/ street light of 45watt confirming to IP 65, complete all as specified and as directed by Engineer -in-charge. Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates |
| 163 | S&F in replacement of Street light bracket of size 40mm dia light grade GI pipe, including nut, bolts, Fastner etc, complete all as specified and directed. |
| 164 | M&L in replacement of invertor wiring with one single core PVC insulated of size 1.5 Sqmm unsheathed copper conductor FRLS 1100 Volt grade multistandard complete all as specified and directed by Engr-in-charge. |
| 165 | Dismantling and refixing ceiling Fan after complete cleaning of dust ,applying a coat of painting on ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler,writing MES on Ceiling Fan and connecting up including provn of cable from ceiling rose to connecter of fan complete all as specified and directed. |
| 166 | Diismantling and refixing Exhaust Fan after complete cleaning of dust ,applying a coat of painting on ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler,writing MES on Ceiling Fan and connecting up including provn of cable from ceiling rose to connecter of fan complete all as specified and directed. |
| 167 | Dismantling and refixing Water Storage type 25 Ltrs complete with help of anchor fasteners ,nuts ,boltsmaking necessary electrical connection and water connection with new PVC Connection of 15 mm size heavy duty inetrnally coated stell coated ISI marked of length 600 mm complete all as specified and directed. |
| 168 | Dismantling and refixing LED Tube Light any type and size with clamp making necessary electrical connections complete all as specified and directed by Engr-in-Charge. |
| 169 | Supply and laying in replacement of galvanised steel water tubing medium grade in trenches / wall /floor with all fittings , connections as required at site of size 20 mm bore, ISI marked complete all as specified and directed. Note: Cost for fixing of GI pipe on wall upto 5 storey building /21mtrs height with heavy duty fastner & clamp, T&P & labour required for same is deemed to included in quoted rates. |
| 170 | All as per Item No 169 here-in-before above butBore of pipe 25 mm, ISI marked complete all as specified and directed. |
| 171 | All as per Item No169 here-in-before above but Bore of pipe 50mm, ISI marked complete all as specified and directed. |
| 172 | S&F in replacement of Stop valve gun metal valve with iron handle screwed both ends for iron pipe and fixed of size 20 mm bore, ISI marked complete all as specified and directed. |
| 173 | All as per Item No 172 here-in-before above butBore of pipe 25mm, ISI marked complete all as specified and directed. |
| 174 | All as per Item No172 here-in-before above but Bore of pipe 50mm, ISI marked complete all as specified and directed. |
| 175 | S&F in replacement of GI union of 20 mm ISI marked complete all as specified and directed by Engr-in-charge. Make- Unik/Tata/Jindal |
| 176 | All as per Item No.175 here-in-before above butBore of pipe 25mm, complete all as specified and directed. |
| 177 | All as per Item No 175 here-in-before above but Bore of pipe 50 mm, complete all as specified and directed. |
| 178 | Supply and fixing in replacement of PVC float valve, high pressure (ball cock bady with epoxy coated aluminium rod & HD ball) of size 50 mm dia.including all fittings, complete all as specified and directed. |
| 179 | S&F in replacement of PPR gate valve (brass insert) of size 63 mm dia including connection and testing complete all as specified and directed including taking out old unserviceable gun metal gate valve 50mm dia Complete all as specified and directed |
| 180 | Supply and fixing in replacement of triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part I. of size 5000 Ltrs. |
| 181 | S&F in replacement of GI tank Nipple of 50mm dia, complete all as specified and directed. |
| 182 | Supply & laying/fixing in replacement of 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size (a) PN-16, 63mm OD (SDR– 7.4).Note: (1) Contractor has to provide heater & other T&P for jointing of PPR pipes & fittings, rate are deemed to be inculede in quoted rate.(2) Note: Cost for fixing of PPR pipe on wall upto 5 storey building /21mtrs height with heavy duty fastner & clamp, T&P & labour required for same is deemed to included in quoted rates. |
| 183 | S&F in replacement of PPR union of size 63 mm dia including connection and testing complete all as specified and directed. |
| 184 | S&F in replacement of PPR socket of size 63 mm dia including connection and testing complete all as specified and directed. |
| 185 | S&F in replacement of PPR MTA of size 63 mm dia including connection and testing complete all as specified and directed. |
| 186 | S&F in replacement of PPR elbow of size 63 mm dia including connection and testing complete all as specified and directed. |
| 187 | S&F in replacement of PPR Teeof size 63 mm dia including connection and testing complete all as specified and directed. |
| 188 | S&F in replacement of PPR Tee reducerof size 63x32X63 mm dia including connection and testing complete all as specified and directed. |
| 189 | S&F in replacement single phase Direct on line starter of capacity 2 HP overload relay range 9-14 Amp.Make- L&T Cart part No: CS90319KOAO /Havell\"s/ Seimens/ Schineder or equivalent ISI marked. |
| 190 | S&F of centrifugal Monoblock pump set with motor, Single Phase, 230V, 5.3-2.25 LPS at 8-26 Mtr head system having capacity 2 HP, suction/delivery size 50x 40mm dia with all connected accessories all as specified and directed.Make:- Crompton/ Kirloskar/ KSB/ JyotiNote: 1) Contractor has to deposite old pump set to MES store in custody of concerned JE.2) Necessary fittings required for connection/header, foundation & shed for pumps is deemed to be included in quoted rates. |
| 191 | M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil, complete all as specified & directed. |
| 192 | M&L for demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) for HDPE tank foundations, complete all as specified & directed. |
| 193 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 194 | M&L for Cement concrete in foundations, filling and mass concrete of Type C2 (1:3:6), (using 40 mm graded aggregate) complete all as specified and directed. |
| 195 | M&L for Taking up or down steel tubing/PPR pipeand connections, including cleaning for refixing or removal to store for pipe of 40/50mm (63mm for PPR) from wall upto 5 storey building /21mtrs height, complete all as specified & directed. |
| 196 | M&L for Taking up or down steel tubing/PPR pipeand connections, including cleaning for refixing or removal to store for pipe of 25mm (32mm for PPR) from roof of 5 storey building/21mtrs height, complete all as specified and directed. |
| 197 | All as above item no: 200 here-in-before above but for pipe of 20mm dia. |
| 198 | M&L for Cutting existing steel tubing/PPR tubing for alterations or additions for 40/50mm dia pipe. |
| 199 | M&L for Cutting existing steel tubing/PPR tubing for alterations or additions for 25mm dia pipe. |
| 200 | M&L for Cutting existing steel tubing/PPR tubing for alterations or additions for 20mm dia pipe. |
| 201 | M&L for Refixing old steel tubing/PPR pipe and connections in new or old position (Walls, ceiling, floors, etc.) of size 40/50mm dia. |
| 202 | M&L for Refixing old steel tubing/PPR pipe and connections in new or old position (Walls, ceiling, floors, etc.) of size 25mm dia. |
| 203 | M&L for Disconnecting of existing pumpset of 2HP, HDPE tank of 5000Ltrs along with connected valve & pipe of different size from site safely and depositing inMES store for reuse by deploying Plumber, electrician and labour and after completion of civil work same serviceable items has to be collected from MES store and is to installed at site, complete all as specified & directed.Note: contractor has to arrange for sufficient no of labours and transport vehicle for loading & unloading of items from site to MES Yard, quoted price is deemed to inclusive of all work menstioned. |
| 204 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. For tank of cap 5000Ltrs, complete all as specified & directed. |
| 205 | M&Lcable XLPE insulated screened PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 5o sqmm 3.5 core ISI marked complete all as specified and directed by the Engineer-in-Charge |
| 206 | Excavation in trenches soft/loosesoil not exceeding 1.5 mtr wide in not exceeding 1.5mtr in depthfor foundation etc or for shaft well, cesspits, manholes, fire hole etc n.exc 10sqmm on plan and not exceeding 1.5mtr in depth and getting out complete all as specified and as directed by the Engineer-In-Charge |
| 207 | Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by the Engineer-In-Charge |
| 208 | Removing excavated material not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and as directed by the Engineer-In-Charge |
| 209 | M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed. |
| 210 | Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete all as specified. |
| 211 | Schedule of Credit |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
