Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | M&Lfor 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete all as specified and directed by Engr-in-Charge. |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engr-in-Charge. |
| 4 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 5 | M&L for 75mm thick PCC as in sub base 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)including demolition of old concrete complete all as specified and directed |
| 6 | Chequerred precast cement concrete tiles Light shade pigment using white cement 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified and directed by Engr-in-Charge. |
| 7 | Dismantling old plaster or skirting including raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engr-in-Charge. |
| 8 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 9 | M&L for Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) as directed by Engineer-in-charge. |
| 10 | M&L for 15 mm cement plaster:1:6 (1 cement : 6 fine sand) on the rough side of single or half brick wall of mix complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc for avearge 25mm thickness. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 12 | M&L for preparing old concrete surfaces and applying a coat of NITO bond EP of M/S Forsroc chemicals or equivalent approved bonding agent as per manufacturer\"s instructions complete all as directed. |
| 13 | M&L providing pressure guniting averaging 20mm thick in cement mortar 1:3 for soffits of slab, chajjas, columns, beams, cantilevers, and parapets etc.,including providing double scaffolding as required complete all as specified and directed |
| 14 | M & L rendering 12 mm thick in CM 1:4 on fair faces of brick work or concrete on ceiling , finished even and smooth without using extra cement complete all as specified. |
| 15 | M&L for 6 mm cement plaster (1 cement:3 fine sand) finished with a floating coat of neat cement complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for Distempering with 1st quality acrylic distemper (ready mixed)Two coats on new work having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete including water thinnable primer over 1mm putty, as per manufacturer\"s specification complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete two coats of Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for White washing with lime to give an even shadefor new work (three or more coats) complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L preparing old plastered surfacesand applying two coats of white wash on ceiling/walls complete all as specified and directed. |
| 20 | M&L for Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives new work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 01 mm thick putty to make surfaces smooth all as required and as directed by Engineer in Charge. |
| 21 | M&L for complete removal of existing treatment wall & ceiling and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as recommended by the manufacturer over01 mm thickputty to make surfaces smooth all as required and as directed by Engineer in Charge. |
| 22 | M&L for coloured non skid ceramictiles 9 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on & including15 mm thick screed bed in cement mortar 1:6complete all as specified and directed. |
| 23 | All as per item No 22above but on vertical surfaces such as skirting and 10mm thick rendering in CM 1:4 on fair faces of brick / concrete surfaces as backing coat for tiles complete all as directed by Engr -in- Charge. |
| 24 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead( For thickness of tiles 10 mm to 25 mm) complete all as specified and directed by Engr-in-Charge. |
| 25 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed by Engr-in-Charge. |
| 26 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of 300 x 450 x7 mm size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed by Engr-in-Charge. |
| 27 | Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead off, complete all as specified and directed by Engr-in-Charge. |
| 28 | Dismantling wood work Of sectional area 40 square centimetres and above in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead and of sectional area 40 square centimetres and above complete all as specified and directed by Engr-in-Charge. |
| 29 | Dismantling wood work Of sectional area below 40 square centimetresin frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead of sectional area 40 square centimetres and above complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/wall cladding etc, fixed with self tapping screws including taking down old sheeting of any description complete all as specified |
| 31 | S&F Plain, galvanised, mild steel sheeting 0.50mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating including taking down old sheeting of any description complete all as specified. |
| 32 | M&L for MS work Hot finished welded type tubes in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. including dismantalling old complete all as specified and directed by Engr-in-Charge. |
| 33 | Material and Labour for roof treatment as follows:- (a) M&L chip out the existing loosed bitumen/bitumen membrane completely reach up mother slab, clean the surface throughly to make it smooth and free of any foreign material, repairs the concrete wherever damaged using PMM HS repair, repairing of construction joints/cracks by chasing with cutting machine and fill the same with polymerized mortar in HS repair, coping of 75 x 75mm should be made at the junction of wall and raft slab using polymerized cement mortar 1:4 admixture with advanced latex plus.(b) Applying one coat of 50% diluted self priming PU roof coat. Allow to dry priming coat for 4-6 hours before applying PU coat and surface to be cleaned before applying PU coat.(c) Applying two coats of single component, cold applied, polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the roof with HS PU Roofkoat of Berger, Asian or Equivalent at 0.6 Kg/Sqm for each coat without dilution confirming to ASTM D 6083-97a (Standard Specification for Liquid Applied Acrylic Coating Used in Roofing). Each Coat should allow to dry 4-6 hours. The component shall have a density of 1.25 to 1.3kg/per litre, having tensile strength of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 2 coats. SRI value should be more than 100. The Quoted rate shall include surface preparation, repair the crack in mother slab by chasing withcutting machine and fill the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacture, making coving at junction, bore packing, treament of construction joints completely as per manufacturer\"s specification and direction of the Engineer-in-Charge.Make: Berger, Asian, STP or EquivalentNote:- The above treatment shall be got carried out by the authorised applicator of the manufacturer approved by the GE. |
| 34 | M&L 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) including dismantalling complete all as specified. |
| 35 | M&L for rendering 12mm in CM 1:3(1 cement;3 Fine cement)overconcrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule. |
| 36 | Supply onlyintegral water proofingcompoundMake :- SCOTT /AQUA PROF/RAILIA |
| 37 | Providing and fixing ISI marked 30 mm thick flush door shutterswith necessary screwsconforming to IS :2202 (Part I) decorative type, core of block boardonstruction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including taking down old shutter as specified and directed by Engr-In- Charge. |
| 38 | S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed. |
| 39 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 40 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer in-Charge |
| 41 | Providing and fixing factory made panel 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufactureM.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beadingon inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete as specified and directed by Engr-In- Charge. |
| 42 | Providing and fixing ISI marked M.S. pressed butt hinges 100x58x1.90 mm sizebright finished with necessary screws etc. complete all as specified and directed by Engr-In- Charge. |
| 43 | Providing and fixing 150x10 mm size aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete as specified and directed by Engr-In- Charge. |
| 44 | Providing and fixing125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 45 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed by Engr-In- Charge. |
| 46 | Providing and fixing aluminium hanging floor door stopper,Twin rubber stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed by Engr-In- Charge. |
| 47 | M&L French spirit polishingTwo or more coats including a coat of wood filler complete all as specified and directed by Engr-In- Charge. |
| 48 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete all as specified and directed by Engr-In- Charge. |
| 49 | M&L for MS work welded in built up sections/ framed work,In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as specified and directed by Engr-In- Charge. |
| 50 | M&Lpainting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified. |
| 51 | Providing and fixing white Vitreous China Flat backwash basin size 550x400 mm with single 15 mm C.P. brass pillar tapwith C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls complete all as specified and directed by Engr-In- Charge. |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass stop cockof standard design and of approved make conforming to IS:8931 complete all as specified and directed by Engr-In- Charge. |
| 53 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed by Engr-In- Charge. |
| 54 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed by Engr-In- Charge. |
| 55 | Providing and fixing:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restswith 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed by Engr-In- Charge. |
| 56 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 57 | S&F in repairs Vitreous China Half stall urinal White of size 430 x 260 x 350mm or 340 x 410 x 265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 40 mm dia CP waste coupling, CP brass urinal spreader, PTMT Urinal Cock, Urinal trap , CP connection of suitable length and fixing with 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Cat Part No 96010 of Hindware orParryware, or equivalent. |
| 58 | Providing and fixing 32 mm dia P.V.C. waste pipe Semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed by Engr-In- Charge. |
| 59 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge. Internal Work- Exposed on wall Providing and fixing G.I. pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall complete all as specified and directed by Engr-In- Charge. |
| 60 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge. Internal Work- Exposed on wallProviding and fixing G.I. pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall complete all as specified and directed by Engr-In- Charge. |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 Ltrs white colour, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed by Engr-In- Charge. |
| 62 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball with 15 mm nominal bore, 105 mm long, weighing not less than 138 gms complete all as specified and directed by Engr-In- Charge. |
| 63 | Providing and fixing gun metal gate valve 20 mm nominal bore with C.I. wheel of approved quality (screwed end)complete all as specified and directed by Engr-In- Charge. |
| 64 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms complete all as specified and directed by Engr-In- Charge. |
| 65 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete all as as specified and directed by Engr-In- Charge. |
| 66 | Providing and fixing PTMT, push cock of approved quality and colour15 mm nominal bore, 98 mm long, weighing not less than 75 gms complete all as as specified and directed by Engr-In- Charge. |
| 67 | Providing and fixing unplasticised P.V.C. connection pipe with PTMTNuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length complete all as specified and directed by Engr-In- Charge. |
| 68 | Providing and fixing square-mouth S.W. gully trap150 x 100 mm size P type With sewer bricks conforming to IS : 4885class SP-1 complete with C.I. grating brick masonry hamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 69 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729 and as directed. |
| 70 | S&Fin repair Bib taps, two way cast copper alloy chromium plated, fancy type with capastan heads, screwed down, screwed for iron pipe or for brass ferrule 15mm borefixed complete all as specified. |
| 71 | Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole complete all as as specified and directed by Engr-In- Charge. |
| 72 | Dismantling old 100 mm diameter C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre complete all as specified and directed by Engr-In- Charge. |
| 73 | Dismantling old 80 mm diameter C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre complete all as specified and directed by Engr-In- Charge. |
| 74 | S&F for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as spcified. |
| 75 | Providing and fixing 75mm dia soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729 laid on floor or on walls complete all as directed. |
| 76 | Providing and fixing 100 mm dia soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729 laid on floors or on walls |
| 77 | Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 1729 vent cowl |
| 78 | Providing and fixing75 mm dia Sand cast iron S&S as per IS- 3989bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete. |
| 79 | Providing and fixing 75 mm dia plain bend Sand cast iron S&S as per IS -IS -1729 of required degree. |
| 80 | Providing and fixing 100 mm dia plain bend Sand cast iron S&S as per IS - 1729 of required degree. |
| 81 | Providing and fixing factory made uPVC glazed/wire mesh windows/doorscomprising of uPVC multi-chambered frame ,sash and million/coupler(where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R! and R2 profiles and 2.10mm for seried R3 and R4 profiles confirming to EN: 12608 in any shape , colour and designduly reinforced with galvanized mild steel section madeof required shape & size as per CPWD specification, uPVCextruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension), EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14,plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame , sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof dilicon sealant over backer rod of aprroved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile nylon rollers with SS 304 body , Using R2 series with frame (70 mm & above) x (40mm & above) x (50mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.2m). |
| 82 | Providing and fixing factory made uPVC glazed/wire mesh windows/doorscomprising of uPVC multi-chambered frame ,sash and million/coupler(where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R! and R2 profiles and 2.10mm for seried R3 and R4 profiles confirming to EN: 12608 in any shape , colour and designduly reinforced with galvanized mild steel section madeof required shape & size as per CPWD specification, uPVCextruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension), EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14,plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame , sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof dilicon sealant over backer rod of aprroved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Fixed window / ventilator with mullion / transom. Using R1 series with frame (33mm & above) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 metre) . |
| 83 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed. |
| 84 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 85 | S&Fstain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixedwith tinned tacks or galvanised wire staples etc as in panels ofwire gauzed shutter complete all as specified and directed. |
| 86 | S&F venetian zebra blinds roller type multicolorfiber water resistant,UV protection,transparent,black out suitable for window etc fixed incl taking down old blinds complete all as specified and directed. |
| 87 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 88 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealedthe face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit n the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 89 | Providing and fixing powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 90 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources complete all as specified and directed by Engr-in-Charge. |
| 91 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 92 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 93 | One light point controlled by one 5 Amps one way switch. |
| 94 | One ceiling fan /exhaust fan point controlled by one 6 Amps one way switch |
| 95 | One 3 pin socket outlet 6 Amps on the same board with other switches. |
| 96 | One3 pin 6 Amps switch socket outlet point on independent board |
| 97 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire .Each point 10 mtrs |
| 98 | S&Fmodular type 06Amps, 05 pin mulitipurposeswitch, socket outlet 03 Nos and16 Amp multipurpose switch, socket outlet 01 Nos on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with2.5 Sqmm point wiring copper conductor. |
| 99 | S&Fmodular type 06Amps, 05 pin mulitipurposeswitch, socket outlet 04 Noson one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with2.5 Sqmm point wiring copper conductor. |
| 100 | S&F Modular Switch 1 way, 6 Amps 1 Module |
| 101 | S & F modular switch 1 way, 16 amps, 1 module |
| 102 | S & F Modular sockets, 6 amps 2/3 pins combined 2 module |
| 103 | S & F Modular sockets,16 amps 5 pins combined 2 module |
| 104 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 105 | Supplying and fixing following rating, four pole, 415 V, isolatorin the existing TPN 100 A 10 KAcomplete with connections, testing and commissioning etc. as required. |
| 106 | S&F6 amps. to 32 amps. ratings , SPN MCB, “C” curve, 10 KA breaking capacity |
| 107 | S&F6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity |
| 108 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door |
| 109 | S&F 8 way, SPN, double door, MCB DB |
| 110 | S&F 6 way, SPN, double door, MCB DB |
| 111 | Supply and fixing LED lights fitting 1x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 112 | Supply and fixing LED Building security Lightfitting 25 Watt 5700K230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 113 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. |
| 114 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size10 sq mm 4 core. |
| 115 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size06 sq mm 2 core. |
| 116 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 117 | Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. |
| 118 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 119 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Upto 35 sq. mm. |
| 120 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 121 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 122 | S&F LED 2\"x2\" type recess mounted lumniaire 35/36W Watt, with Drive, connector block, etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting and connecting testing complete fixed on false ceiling complete. |
| 123 | Pipes galvanized, “Medium class”, supplied And laid complete including fittings 40 mm (1.5”) dia. |
| 124 | Pipes galvanized, “Medium class”, supplied And laid complete including fittings 25 mm (1.0”) dia. |
| 125 | Pipes galvanized, “Medium class”, supplied And laid complete including fittings 15 mm (1/2”) dia. |
| 126 | S&F Cast copper alloy Stop Valve,50 mm size screwed down, high pressure, with butterfly handle screwed both end for iorn pipe. |
| 127 | S&F Cast copper alloy Stop Valve,25 mm size screwed down, high pressure, with butterfly handle screwed both end for iorn pipe. |
| 128 | S&F Cast copper alloy Stop Valve,15 mm size screwed down, high pressure, with butterfly handle screwed both end for iorn pipe. |
| 129 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
