Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | (A) Civil Work |
| 2 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :75 to 80 mm dia pipe |
| 3 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stackingof serviceable material with in 50 meters lead as directed by Engineerin- charge. |
| 4 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 6 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings,runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approvalof Engineer-in-charge. |
| 7 | Removal of Damaged concrete: Removal of damaged concrete along with loose damaged and cracked concrete/cover concrete at all specified locations up to beyond the corroded steel reinforcements to a depth of 10mm minimum behind the reinforcement by chipping/hacking with chiesel and hammer or by mechanical means like chiesel hammer.Removal of dust,loose particles,marine growth etc. from concrete surface manually by wire brush,mechanically or any other means to obtain a sound surface over areas other than above. |
| 8 | Zinc rich coating: Supply & Applying inhibition coars/system to exposed reinforcement bars after drying and also new bars after cleaning & removing scales and rust completely as specified.Two component inhibitor Nitozinc Primer or equivalent as approved by engineer shall be used as per manufacturers specification in two coats including all labours,tools and tackles necessary surface preparation and necessary surface preparation and necessary protection after and during work. |
| 9 | Injection Grouting:Supply & Application injection/pressure grouting in cracks in the parent concrete by fixing PVC nipples 1000mm to 1500mm distance or specified distances as decided. Pressure grouting using low viscous epoxy grout Conbextra EP 10 (M) of Fosroc. |
| 10 | Anchoring Additional steel bars as required drilling holes into existing concrete sunstrate for anchoring of new rebars with 10mm dia shear conncetors at 0.5mt c/c and fixing with chemical anchor Lokfix of Fosroc make. |
| 11 | Providing & Fixing GI weld mesh 25X25X14 gauge |
| 12 | Supply & applying epoxy bonding agent over existing surface with Nitobond EP. |
| 13 | Polymer modified Mortar Renderoc SP40:Supply & applying pre-packed fibre reinforced mortar after fixing GI weld mesh. |
| 14 | Polymer modified Plaster over SP40 repaired surface:Applying polymer modified mortar admixed with Nitobond SBR Latex in cement mortar 1:3 over repaired surface with Renderoc SP40. |
| 15 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) .Epoxy injection grout in concrete/RCC work of approved make |
| 16 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick |
| 17 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles ofSize 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlockingmetal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprisingof main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to befixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shallbe carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 18 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre |
| 20 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
| 22 | 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 23 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Up to 10 mm thick |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) |
| 25 | For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 27 | Providing and fixing at any height single socketed ringfit SWR pipe of 13dB / 2 LPS tested to EN 14366 manufactured as per international standard EN-12056 as per direction of Engineer in-charge. 110 mm diameter Similar Specification as of Silencio-Astral, basic cost not less than 462.90 rs/m without GST |
| 28 | Providing & fixing PVC SWR pipe clip for 110 mm dia (Similar Specification as of Silencio-Astral, basic cost not less than 13.26rs/piece without GST) |
| 29 | Providing and fixing at any height single socketed ringfit SWR pipe fittings of 10dB / 2 LPS manufactured as per international standard EN-12056 as per direction of Engineer in-charge.Door Tee. 110 mm diameter.(Similar Specification as of Silencio-Astral, basic cost not less than 639.89rs/piece without GST) |
| 30 | Providing and fixing at any height single socketed ringfit SWR pipe fittings of 10dB / 2 LPS manufactured as per international standard EN-12056 as per direction of Engineer in-charge.Coupler 110 mm diameter.(Similar Specification as of Silencio-Astral, basic cost not less than 220.21rs/piece without GST) |
| 31 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in: Cement mortar 1 :4 (1 cement : 4 coarse sand) |
| 33 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 35 | Extra for providing and mixing water proofing material in cement per bag of concrete work in doses by weight of cement as per manufacturer\"s 50kg cementspecification. |
| 36 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 37 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stackingof serviceable material with in 50 meters lead as directed by Engineerin-charge. |
| 38 | Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weightnot less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebateshall be measured). |
| 39 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebrablack marbleArea of slab upto 0.50 sqm |
| 40 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chanas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-111) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 41 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Cold twisted bars |
| 42 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers andcantilevers |
| 43 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quickset tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to bemade separately). Size of Tile 600x600 mm |
| 44 | \"+\" Shape Workstation (Quadruple Cluster):67mm thick Sliding Tile Base partition of 1350mm height.Single metal wire raceway cover at skirting level in partition. Soft board, frosted glass and White board in partition above table top in partition & Pre-laminated MDF tiles below top, with SWITCH SOCKET as per requirement. |
| 45 | Visitor Chair To Executive Mesh Chair:Cantilever non-tilting Office Chair with Steel tube frame, with MouldedT-armrest fitted with seat bottom, Seat / Backrest Padded type, Seat Material Moulded plywood 12 mm Thickness, Seat/Backrestupholstered with Mesh Fabric of Black colorDimension : (W)600mm X (D)630mm X (H)1030mmSeating Height : 470 mm |
| 46 | Officer\"s Table With Side Unit:L shaped desk made of Engineered Wood with flat linear table top inMaple with dark grey sides, Wire Manager, Computer Tray, Computer Trolley and three drawers of varying proportions with central lockingmechanism and finished in the same maple as the table top.Dimension Desk: (W)1800mm X (D)750mm X (H)750mmDimension Side Unit: (W)1000mm X (D)450mm X (H)750mm |
| 47 | Large Conference Table Rectangular Shape With Curved Edges: Size : 3600L x 1500W x 750Ht Meeting/conference table made of Engineered wood - MediumDensity Fibre Board in Brown Walnut Color in glossy finish, smoothfinished edges, and levelers for stability on uneven surfaces. 36mm thk. Prelam MDF board tabletop with PVC edge banding, withround PVC grommet. Tabletop supported with 36mm thk Prelam MDF side panel & 18mmthk Modesty panel with PVC edge banding.Provision of 6 Module fliptop box (WITHOUT SWITCH-SOCKET )above table & below metal raceway, pole with powder coating finish foe electrical wiring access. |
| 48 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 49 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorV level.Cement mortar 1:3 (1 cement :3 coarse sand) |
| 50 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mmwith single 15 mm C.P. brass pillar tap |
| 51 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing &fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cisternfittings, nuts, bolts and gasket etc complete. |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 53 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 54 | Providing and fixing white vitreous china urinal of approx. size 610 x 390 x 370 mm, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification anddirection of Engineer-in-charge. |
| 55 | Providing and fixing aluminium extruded section body tubular typeuniversal hydraulic door closer (having brand logo with lSi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 56 | Providing and fixing aluminium sliding door bolts, ISI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 57 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 58 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 59 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 60 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 61 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand cast iron S&S asper IS - 3989 |
| 62 | Providing and fixing C P Brass health faucet including connection pipe with brass union and holder of approved brand etc. complete |
| 63 | Providing and fixing toilet paper holder : C.P. brass |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and the cost of cutting chases and making good the sameincluding testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 65 | Engaging for full day (8 hours) a tractor with trolley of minimum capacity 2.83 cum including hiring charges, cost of fuel, lubricant, wages of driver, etc. but excluding the cost of required labor for loading / unloading (which will be paid separately) for disposing of any type of debris / transporting any material within ONGC campus as per directions of EIC. |
| 66 | (B) Electrical Works |
| 67 | Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directedwith medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III |
| 68 | Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III |
| 69 | Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories for 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board ith medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT III |
| 70 | Providing 6/16Amp. Universal socket of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 71 | Providing 6 Amps Bell Push of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 72 | Providing 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 73 | ProvidingIndicating Call Bell of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 74 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size of 1.5sq.mm. 2 core size |
| 75 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size of 2.5 sq.mm. 2 core size |
| 76 | Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC /Metalboard with3 mm thick PC (Polycarbonate) /Acrylic sheet erected as directed 1 no6A/16A universal plug-switch combined. 3 nos.6ASwitch 3 nos. 6A 5 pin Plug For Modular Type Accessories.[Cat-III] |
| 77 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)A) Tube Light with integral driverv) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet |
| 78 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Wattassembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select anywattage capacity between the ranges shown.)LED Panel Light with provision for Planefront frame with translucent cover fixed to housing complete.IP20 36 watts, 24\" x 24\", Surge- 2KV CAT III |
| 79 | Supplying and erectingMirror Light 9 Watts, wall mounted minimum 1 feet long indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)[CAT-III] |
| 80 | Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box confirming to IS 8828/1996 with ISI Mark CAT-III |
| 81 | Providing and erecting Approved make Four pole moulded case circuit breaker havingbreaking capacity ICU of 25 KA at 415 V having normal current rating 100A with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing ICS=100% of ICU only Cat III |
| 82 | Providing and erecting Sheet Steel powder coated MCB distribution board for - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) of sheet steel double door 16-way. CAT-III |
| 83 | Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. |
| 84 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 RPM Cat.II |
| 85 | Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. (Make shall be approved by EIC) CAT-III |
| 86 | Providing and erecting 1.5 ton, premium category Inverter based 5 star of current year rartingapproved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means ofextra supplied proper insulated copper tubing,drain PVC pipes suitable for (cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with necessary core cutting. |
| 87 | Providing and erecting 2.0 ton Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and above of current year) with necessary core cutting. |
| 88 | Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity |
| 89 | Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directedwith medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III |
| 90 | Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III |
| 91 | Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories for 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board ith medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT III |
| 92 | Providing 6 Amps Bell Push of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 93 | ProvidingIndicating Call Bell of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. [CAT-III] |
| 94 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size of 1.5sq.mm. 2 core size |
| 95 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size of 2.5 sq.mm. 2 core size |
| 96 | Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC /Metalboard with3 mm thick PC (Polycarbonate) /Acrylic sheet erected as directed 1 no6A/16A universal plug-switch combined. 3 nos.6ASwitch 3 nos. 6A 5 pin Plug For Modular Type Accessories.[Cat-III] |
| 97 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)A) Tube Light with integral driverv) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet |
| 98 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Wattassembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select anywattage capacity between the ranges shown.)LED Panel Light with provision for Planefront frame with translucent cover fixed to housing complete.IP20 36 watts, 24\" x 24\", Surge- 2KV CAT III |
| 99 | Supplying and erectingMirror Light 9 Watts, wall mounted minimum 1 feet long indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)[CAT-III] |
| 100 | Providing and erecting Approved make Four pole moulded case circuit breaker havingbreaking capacity ICU of 25 KA at 415 V having normal current rating 100A with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing ICS=100% of ICU only Cat III |
| 101 | Providing and erecting Approved make Four pole moulded case circuit breaker havingbreaking capacity ICU of 35 KA at 415 V having Normal current rating 200A with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III |
| 102 | Providing and erecting Approved make Four pole moulded case circuit breaker havingbreaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing, ICS=100% of ICU only Cat III |
| 103 | Supplying and erecting triple pole & neutral 440V/ 500V panel mounting AluminiumBusbars with four equal Nos. of bus having current density not more than 0.8 Amp. /sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections Suitable for 400 Amp. Capacity |
| 104 | Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box confirming to IS 8828/1996 with ISI Mark CAT-III |
| 105 | Providing and erecting Sheet Steel powder coated MCB distribution board for - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) of sheet steel double door 16-way. CAT-III |
| 106 | Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used) brass/cadmium plated nut bolts in an approved manner (12 way outgoing) |
| 107 | Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. (25mm X 6mm iron strip) |
| 108 | Supplying & erecting earth pit of minimum bore dia. 150mm size approved make Earthing Electrode consisting Pipe-in- Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25 mm having 200-250 Micron 1 galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Inchge has to ensure the value of earthing resistance mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound) - Resistivity:- 0.2 ohm / meter testing as per EC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound : - Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C. Plant & Sensitive Computer System (like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe: 3.00 Mtr Back filling Compound :2 Nos Bags of 25 Kg. |
| 109 | Painting the number and words for inventory Identification on erected fittings / equipment’s or Such accessories as may required with good quality of enamelled paint as directed by engineer in charge. (Each of 25mm height) |
| 110 | Providing & erecting weather proof, dust & vermin proof, floor mounted front operatedoutdoor type double door cubical panel board necessary IP-54 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories, supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with locally fabricated panel board manufacturers with following size.with 350 mm depth |
| 111 | Providing & erecting weather proof, dust & vermin proof, floor mounted front operatedoutdoor type double door cubical panel board necessary IP-54 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories, supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with locally fabricated panel board manufacturers with following size.with 550 mm depth |
| 112 | Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. |
| 113 | 3 & 1/2 core 35/50 Sq. mm |
| 114 | 3 & 1/2 core 70 Sq. mm |
| 115 | 3 & 1/2 core 95 Sq. mm |
| 116 | 3 & 1/2 core 120 Sq. mm |
| 117 | 3 & 1/2 core 150 Sq. mm |
| 118 | 3 & 1/2 core 185 Sq. mm |
| 119 | 3 & 1/2 core 240 Sq. mm |
| 120 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. |
| 121 | 16/25 Sq.mm. |
| 122 | 35/50 Sq.mm. |
| 123 | 70 Sq.mm. |
| 124 | 95 Sq.mm. |
| 125 | 120 Sq.mm. |
| 126 | 150 Sq.mm. |
| 127 | 185 Sq.mm. |
| 128 | 240 Sq.mm. |
| 129 | Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. |
| 130 | Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original |
| 131 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 RPM Cat.II |
| 132 | Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. (Make shall be approved by EIC) CAT-III |
| 133 | Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate. |
| 134 | Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter |
| 135 | Supplying & erecting directly operated single phasing preventer complete erected and connected to supply up to 45 Amp. Range. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
