|
| 1 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shadecomplete. |
| 5 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10mm to 25mm. |
| 7 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 8 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood |
| 9 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 10 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type Fastener with threaded dia 6 mm |
| 11 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : stainless steel butt hinges 125x64x1.90 mm |
| 12 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm |
| 13 | Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type. |
| 14 | Providing and fixing wall mounted / ceiling mounted industrial Chimneyhaving following specification including testing commssioning and testingcharges at site as per direction of engineer in charge.1.S.S Exhaust hoodmake canopy type Both Side Fresher and oil Collector Box Double Sidei. Size= 96x40x16 inchii. Size= 84x40x16 inch(Material of Chimney Stainless Steel 202 &0.80 mm gauge ) Qty= 15 Rft.2. Providing oil filter: buffle type SS 25 gauge. Qty=250 Sqft3.Made: Jindal,kitchen to machine inlet to out let ducting(0.72 Gauge) Total= 250.00 Sqft 4. Exhaust blower machine 1.5 HP for Roti Tawa.Qty=01 Nos 5.Exhaust blower machine 1HP for Kadhae Range. Qty= 01 Nos.6. Fresh air system 0.75 HP cabinet type machine.Qty=01 Nos. 7. Fresh air ducting 0.70. Qty= 200 Sqft. 8. Fresh air grill aluminium 6x8. Qty= 05 Nos. 9. Installation charges and fitting charges with auto mobile nut bolt asbustos packing outlet safety jali etc |
| 15 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
| 16 | Supply, Installation, Testing and Commissioningof Heavy duty exhaust fan of 300 mm sweep 900 RPM suitable for opration on 230V single phase 50Hz AC supply in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
