|
| 1 | Anganwadi no.44 ,Kumbalathamon - ward no.IX ROOFING OF TOP FLOOR |
| 2 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 3 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 4 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 5 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 6 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 7 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 8 | OD440614/2024-2025:Plain G I ridge capping 225 mm flaps with 0.46 mm thick /nearest available size SS screwsincluding plain washers plain washers and bitumen washers etc. complete. |
| 9 | OD440615/2024-2025:Roofing with GI powder coated trafford sheet straight/curved size 0.46 mm thick nearestavailable thickness with overlaps of 150 mm at ends and G I hooks or crank CI bolts and nutsincluding plain washers and bitumen washers etc, complete |
| 10 | OD440713/2024-2025:providing and fixing 40*40*2mm square tubeand fixing the weld mesh allround the work. Area of weld mesh 1*2.6=2.6m2 Square tube40*40*2mm vertical 2*2.6=5.2, horizontal3*1.00=3.00metre, total8.2mtr. add 5% waistage=0.41mtr Grand total8.61mtr *2.31kg/mtr=19.88kg. weld mesh1.00*2.6=2.6m2 |
| 11 | 54 No Anganvadi Areekkakavu ROOFING OF TOP FLOOR-ward VIII |
| 12 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 13 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 14 | OD428499/2024-2025:Plain G I ridge capping 225 mm flaps with 0.46 mm thick /nearest available size SS screwsincluding plain washers plain washers and bitumen washers etc. complete. |
| 15 | OD428500/2024-2025:Roofing with GI powder coated trafford sheet straight/curved size 0.46 mm thick nearestavailable thickness with overlaps of 150 mm at ends and G I hooks or crank CI bolts and nutsincluding plain washers and bitumen washers etc, complete |
| 16 | OD440723/2024-2025:providing and fixing 40*40*2mm square tubeand fixing the weld mesh allround the work. Area of weld mesh 1*2.6=2.6m2 Square tube40*40*2mm vertical 2*2.6=5.2, horizontal3*1.00=3.00metre, total8.2mtr. add 5% waistage=0.41mtr Grand total8.61mtr *2.31kg/mtr=19.88kg. weld mesh1.00*2.6=2.6m2 |
| 17 | MUKKUZHI 41NO ANGANVADI WARD IX |
| 18 | 11.38:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. |
| 19 | Anganvadi NO 35 Edakkulam WARD XV |
| 20 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
