|
| 1 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 2 | Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete |
| 3 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.(IPS flooring) |
| 4 | Removing the existing Lime plaster or cement plasterof any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete (IPS flooring) |
| 5 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 6 | Removal of Pointing : Removing cementious pointing and other epoxy - based hard material from joints and surface area of Basalt stone manually with chisel and hammer or with the help of electric grinders. including scaffolding / racking out joints cleaning etc complete Proper care should be taken so that any portion of the stone is not damaged during removal of pointing . |
| 7 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 8 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 9 | Removal of paint from timber surfaces with flame, cleaning and making the surface even, scaffolding etc complete. The item includes careful application of flame by beldar or equivalent labour so that the original surface does not catch fire followed by neat scraping off the burnt away paint from surface by 2nd class carpenter using necessary tools leading to a neat surface ready for further treatment or proposed finish or as directed by Engineer or Architect incharge on site. The work should in no way disturb or damage the minute details details in wood carving work. |
| 10 | Cleaning of paintfrom iron surfaces and application of an Red oxide paint to existing castiron fixtures. paint can be removed by using oxypropane flame at a proper temperature without damaging the Cast iron surface, Paint removed by wire brushing or applying a chemically neutral solution based on a combination of acid and alkali materials. Item also includes preparing the surface for paintings and coatings, also paint will be removed fromgrooves and the process can repeat 2 or 3 times for clean the cast iron surface etc. complete . |
| 11 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. |
| 12 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. |
| 13 | Providing and fixing double scaffolding system (cup lock type) on the exterior side ofbuilding/structure, including additional rows of scaffolding in stepped manner as perrequirement of site, madewith 40mmdia M.S. tube, placed 1.5 metrecentretocentre, horizontal & vertical tubes joint withcup&lock system with M.S. Tubes, M.S. tube challis, M.S.clampsandstaircasesysteminthescaffoldingforworkingplatformetc.and maintaining itinaserviceableconditionforexecutionofworkofcleaningand/or pointingand/or applying chemical and removing it thereafter. The scaffolding system shallbestiffenedwithbracings,runners,connectingwiththebuildingetc, wherever required, if feasible, forinspectionofworkatrequiredlocationswith essential safety features for the workmen etc., completeasperdirectionsandapproval of Engineer-in-charge.Note:- (1) The elevationalareaofthescaffoldingshallbe measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 14 | Providing Brick Masonry Second Class in superstructure with size of brick 9″ x 4½″ x 2½″ in lime mortar 1:1½, as per detailed specifications and drawings or as directed including the bricks to be of uniform size, moulded ground, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in suchbond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints are not to exceed12.5 mm. (½″), no bats or halfbricktobeused inthework,rackingoutjointswherepointingorplasteringto bedone, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. |
| 15 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 16 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 17 | Providing12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1as perdetailedspecificationsanddrawingsorasdirectedincludingalljointsinmasonryandbrick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water andthoroughlywettedforsixhoursbeforeplastering,theplastertobeappliedinanevenand uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 jaggary and 640grampulpofwoodapple(Belfruit)in90to135litreofwater,theplasterbeingwetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, watering and allwork when handed over to be perfectly clean and free from all mortar stains etc. complete. |
| 18 | ProvidingFineCoatOf Limeover roughcastplasterinsuperstructure,asperdetailed specifications and drawings or as directed including the finishing coat is to be applied over rough castplasterandwell-polishedwithtrowel,preparingthelimemortar,scaffoldingandwatering complete. |
| 19 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat) |
| 20 | Providing and fixing Ist quality (Superior Quality) B.T.C. Teakwood in structural members likeBeams and columns, wooden members etc. including removing damage or decayed wood members, fixing stainless steel screws, cutting, sawing, making proper wood joinery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete |
| 21 | Providingandfixing0.025 m.(1″)thickTeakWoodPlanking,asperdetailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 0.025 m.(1″) thick and from 0.127 in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joistbelow,to break joint withone another and tobe rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunkand the exposed surface of boards then planed quite smooth, etc. complete. |
| 22 | Providing and fixing Ist quality (Superior Quality) Burma Teakwood for ornamental art work in structural wooden members like decorative , arches, eaves board, wooden railing, balusters etc. or any other wooden members etc. including removing damaged or decayed wood members, fixing stainless steel screws, cutting, sawing, making proper wood joinery, scaffolding if necessary all iron work etc. complete. As per Drawings, specification: As Directed by Engineer In Charge. Mode of Measurement: Outer - most dimensions of the carved members will be used for calculation of volume. |
| 23 | Providing and fixing false ceiling of teak wood particle board half perforated sheet 12 mm thick including scaffolding, if necessary, all iron work and two coats of oil painting to boards and beading i.e. visible surface etc. complete. (excluding frame work and runners) |
| 24 | Providing and fixing Indian teak wood eaves boards 15 cm wide and 25 mm thick plain decorative type including scaffolding and painting with two coats etc. complete |
| 25 | Providing and fixing country cut teak wood false ceiling with steel rings for supporting or resting to the wooden planks. Planks fixed with Nuts and bolts.steel rings are fixed to truss via welding .including lead and lifts. |
| 26 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/Sq.M..). |
| 27 | Providing and fixing Mangalore tiled roofing with class\"AA\" tiles including securing the last course of tiles near the eaves with steel flat 40mm x 3mm and 1.22mm wire fixing 50mm x 25mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles). |
| 28 | Providing and fixing Mangalore tile ridge and hip tiles of class\"AA\" including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. |
| 29 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 30 | Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete |
| 31 | Providing and applying Melamine Polish of required finish to the wood work by spray machine including knotting and repairing the even surface by scrapping , applying french polish scffolding if required etc complete. |
| 32 | Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. |
| 33 | Providing & fixingBlack basalt stone of Second sortflooring ,Minimum size of stone (0.45 x 0.30) M. as per design & detailed drawing & size, from approved source of & quality, including transportation & conveyance to specific location, layingat a slope of 1 : 40 in line, level over layer of 20 mm. thick 1 : 1 lime mortar, with joints not exceeding 3 MM thick, specialadhesive material like araldite, adding Bonding ingredients like Bel fruit (30Kg), Black Gur (jaggery)(20Kg) and other materials as per requirement against the quantity of lime mortar of 1.00 Cu.M, etc. with watering, curing, etc. complete. The sides of the stone are to be dressed true and square for atleast half the depth from the face, and the joints shall be set in lime for 1\" in from face. |
| 34 | Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete |
| 35 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 36 | Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flowo fall tanks capacity above 1000 to 20,000 litres. |
| 37 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. |
| 38 | Providing and fixing Orissa type white glazed earthen ware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe up to outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete |
| 39 | Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. |
| 40 | Providing and fixing 10 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 41 | Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON059) including necessary sockets/union nut etc. complete. |
| 42 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 43 | Providingandfixing100mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 44 | Providing and laying concrete pipes of I.S. NP. Class of 150 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 45 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 46 | Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary (including excavation and laying) |
| 47 | Providing and fixing 15mm diameter water meter with nonreturn valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber]. |
| 48 | Providing and making ISI Mark ferrule connection of 50 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. |
| 49 | Providing, laying & fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. |
| 50 | Providing, laying & fixing P.V.C. pipe of 32mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. |
| 51 | Providing, laying & fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. |
| 52 | Providing, laying & fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. |
| 53 | Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 54 | Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. |
| 55 | Providing and fixing in position powder coated aluminium louvered windows /ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80x38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. |
| 56 | Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. |
| 57 | ProvidingandfixingC.P.pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON 021) including necessary sockets/union nut etc. complete. For WC & Washing machines |
| 58 | System Integration |
