|
| 1 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 2 | M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed. |
| 3 | M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 4 | M&L for preparing of old surfaces of wall and applying one coat of distemper oil emulsion by using roller complete all as specified and as directed. |
| 5 | M&L for preparing of old surfaces of walls and applying two coats of distemper oil emulsion by using roller complete all as specified and as directed. |
| 6 | M&L for preparation ofwashing, rubbing down and scrapping of plastic emulsion paint of old decorated wall surfaces etc and applying one coat of plastic emulsion paint by using roller etc complete all as specified and as directed. |
| 7 | M&L for preparation ofwashing, rubbing down and scrapping of plastic emulsion paint of old decorated wall surfaces etc and applying two coat of plastic emulsion paint including a coat of priming paint by using roller etc complete all as specified and as directed. |
| 8 | M&L for preparation of old or new surfaces of wall and applying 3mm thick wall care putty complete all as specified and directed as per direction by Engr-in-charge. |
| 9 | M&L for preparation of washing, rubbing down and scrapping of old surfaces of wall and applying one coat of acrylic emulsion(weather coat) paint using roller brush etc complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for preparation of washing, rubbing down and scrapping of old surfaces of wall and applying two coats of acrylic emulsion (weather coat) paint using roller brush etc complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for applying two coats of cement paint on old surfaces of wall including preparation after application of cement base wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10cm width or girth andapplying one coat of synthetic enamel paint complete all as specified. |
| 13 | M&L for preparation of old decorated steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | Taking down cement plaster in cement or cement lime mortar on brick or stone wall/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and as directed. |
| 15 | M & L for 10 mm thick renderingin CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified. |
| 16 | M&L for prepation of new plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, after application of wall care putty complete all as specified and directed. |
| 17 | M & L for 10 mm thick cement plaster in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for prepation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 19 | M&L for 5mm thick rendering in cement mortar (1:4) (as second coat), over and including 10mm thick rendering in cement mortar (1:6) (as first coat) on fair faces of brick work or concrete surfaces of wall, including supply mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even and smooth without using extra cement complete all as specified and as directed.Note :- Water proofing compund shall be measured and paid separately. |
| 20 | M&L for preparation of new plaster surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed. |
| 21 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 22 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed. |
| 23 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 25 | M&L for joint free (edge cut) glazed ceramic coloured tiles 7 mm to 8 mm thick (square/ rectangular) polished area of each tile 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm as in skirting/dado etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tile complete all as specified and as directed. |
| 26 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed. |
| 27 | Demolition of cement concrete in roof, floor (other than ground floor) beam, staircase, landing chajjas and similar suspended works, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed. |
| 28 | M&L for 25 mm thick plain cement concrete (1:2:4) type B1 (using 12.5 mm graded stone aggregates) as in flooring in leveling course, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 29 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc.laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc.laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for light shade colour vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Demolition of stone slabs and tiles of any thickness and in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and as directed. |
| 33 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M&Lfor Granite slab / (lakha red) 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 35 | Labour only for moulding to granite stone into bracket straight or circle to facing of squared granite of any description complete all as specified and as directed. |
| 36 | Dismantling of75 / 100 mm dia cast iron/ PVC pipes, jointed in cement mortar fixed on wall and removing where directed by Engineer-In-Charge. |
| 37 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and as directed. |
| 38 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 39 | S&F in repairs PVC (SWR) plain bend 75 mm dia, of any radius with rubber ring joints, complete all as specified and as directed. |
| 40 | S&F in repairs PVC (SWR) plain bend 110 mm dia, of any radius with rubber ring joints, complete all as specified and as directed |
| 41 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 42 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75mm bore dia of outlet of pipe complete all as specified and as directed. |
| 43 | S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 44 | S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 45 | S&F in repair SS floor drain double trap with collar for firm grip, rotating lock drain jali & cockroach trap for prevention of pests fixed with white or grey cement complete all as specified and directed. |
| 46 | S&F in repairs SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified and directed. |
| 47 | M&L for cutting holes into or through stone/pcc block wall built cm. and making good in cm 1;3 or PCC type B-1 on required. Superficial area exc 150 sqcm but 400 sqcm complete all as specified and directed. |
| 48 | Supply and fix in repair 250 mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or drawn brass bolts and fixed complete all as specified and as directed. |
| 49 | S&F in repair Extruded brass handles of size 150mm, fabricated type polished handles, cast type complete all as specified and as directed. |
| 50 | S&F in repair 150 mm size brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section and fixed complete all as specified and as directed. |
| 51 | S&F in repair 100 mm size brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section and fixed complete all as specified and as directed. |
| 52 | S&F in repair 100mm butt hinges, medium weight, cold rolled butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed. |
| 53 | Takingdown chowkats or frame n. exc. 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 54 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and as directed. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm and n. exc. 4.00 Sqm each complete all as specified and as directed. |
| 56 | S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 57 | M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) in 1:4 CM as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and as directed. |
| 58 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 59 | S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed. |
| 60 | S&F 150mm size aluminum handles, cast type anodised complete all as specified and as directed. |
| 61 | S&F 150 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 62 | S&F 100 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 63 | S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 64 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and as directed. |
| 65 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw and bolts complete all as specified and as directed. |
| 66 | S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 67 | S&F in repairs door closer aluminium (die cast) body hydraulically regulated designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 68 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed. |
| 69 | Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm andstainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. Thepanels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specifiedby the manufacturer and as per directions of Engineerin- charge. supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II complete all as specified and as directed. |
| 70 | S&F in repair mirror of area not exc 2 sqm bevelled edge over table top/ under counter washbasin of selected quality and glass monuted 6mm thick edge cut and fixed to wall with nylone sleeve cadmium plated screw complete complete all as specified and as directed. |
| 71 | S&F in repairs 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer complete all as specified and as directed. |
| 72 | S&F in repairs PVC cabinet with mirror of size 450mm x 600mm complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F in repairs auto hinges (zero degree or eight degree) for kitchen cabinets complete all as specified and as directed. |
| 74 | S&F in repairs ruler/vertical blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction having roller, threads / Chain & pully system (clutching mechanism)etc complete Sample /Design approved as per GE complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repairs Peg set of set of six (cloth hanger) complete all as specified and as directed. |
| 76 | S&F in repair25 mm dia stainless steelroddrapery rod cut to size and fixed in position, including all fitting complete all as specified and as directed. |
| 77 | Dismantling water tanks exc. 250 but n. exc. 500 Litres capacity complete all as specified and as directed. |
| 78 | Dismantling water tanks exc. 500 but n. exc. 1000 Litres capacity complete all as specified and as directed. |
| 79 | S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified as directed. |
| 80 | S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified as directed. |
| 81 | S&F in repairs 20mm ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 82 | S&F in repairs 25mm ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 83 | S&F in repairs CP overhead rain shower ABS type square/circular complete with all fittings complete all as specified and as directed. |
| 84 | S&F in repairs CP (bidet sray) Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and as directed. |
| 85 | S&F in repair brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and as directed. |
| 86 | S&F in repairs 32mm PVC waste pipe for wash hand basin / urinal / sink 600mm long complete all as specified and as directed. |
| 87 | S&F in repairs 15mm bore bib tap fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed. |
| 88 | S&F in repairs 15mm bore stop valve, fancy type, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or fo runions and fixed to 15mm bore pipe complete all as specified and as directed. |
| 89 | S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered \"Hot\" or \"Cold\" withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. |
| 90 | S&F in repairs Pillar taps with swan neck with central hole basin mixer with round spout with Popup waste system with 450 mm long braided hoses with capstan heads, chromium platedscrewed down highpressure, with or without lettered \"Hot\" or \"Cold\" withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. Make : Jaquar FLR-5169NB or equivalent as approved by GE. |
| 91 | Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high Pressure, screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete all as specified and as directed. |
| 92 | S & F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed. |
| 93 | Supply and fix in repairs single piece concealed cistern body (front or top actuation) with floor mounting frame, installation kit and p type drain pipe connection set for wall hung WC , fixed in position and connecting complete all as specified and directed. Make: Jaquar Cat No JCS-WHT-2431FP or equivalent as approved by GE. |
| 94 | S & F in repairs rimless wall hung EWC with UF soft close seat cover with hinges and accessories set of size 390 x 570 x 365 mm complete all as specified and directed. Make : Jaquar Cat No VGS WHT 81953 UF or equivalent as approved by GE. |
| 95 | S & F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed. |
| 96 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed. |
| 97 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, fixed in position and connecting complete all as specified and directed. |
| 98 | S&F in repairs plastic sheet covers of white colour for water closet, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat No VGS WHT 81953 UF or equivalent as approved by GE. |
| 99 | S&F in repairs plastic sheet covers of any colour for water closet, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F in repairs Chromium plated corner glass shelf size 12 inch with bracket complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F in repairs Chromium plated sqaure/rectangular glass shelf with ss raili size 600 mm long with bracket complete all as specified and directed by Engr-in-Charge.Make: Jaquar ACN-1171N or equivalent as approved by GE. |
| 102 | S&F in repairs Toilet paper holder complete all as specified and directed by Engr-in-Charge.Make Jaquar ACN-1151N or equivalent as approved by GE. |
| 103 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 104 | S&F in repairs 15 mm size sink mixer for mixing hot & cold water screwed down for iron pipe and fixed cast copper alloy chromium plated with capstan head with all connected accessories fixed complete all as specified and directed. Make: Jaquar VGP-81005NB or equivalent as approved by GE. |
| 105 | S&F in repairs Tubular towel ring with round flange complete all as specified and directed by Engr-in-Charge.Make: Jaquar ACN-1121 N or equivalent as approved by GE |
| 106 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 107 | S&F in repair stainless steel kitchen plate rack of size 31\" x 36\" x 10\" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and as directed. |
| 108 | S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed. |
| 109 | M&L for ATT along the external/ internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 110 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 111 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 112 | S&F in repair 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 113 | S & F in repairs 18/19mm thick acrylic PVC celuka ply board as in kitchen shutters and cupboards both side laminated waterproof complete all as specified and as directed. |
| 114 | S&F in repairs 18 mm thick Prelaminated particle board, exterior grade, prelaminated one sides with decorative choice laminations fixed with screws complete all as specified and as directed. |
| 115 | S&F in repairs 12 mm thick Prelaminated particle board, exterior grade, prelaminated one sides with decorative choice laminations fixed with screws complete all as specified and as directed. |
| 116 | S & F in repairs 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, typeBB fixed with screwsto timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and as directed. |
| 117 | S & F in repairs 12 mm thick plywood (07 Nos of ply) grade BWR, typeBB fixed with screwsto timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and as directed. |
| 118 | S & F in repairs 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and as directed. |
| 119 | S & F in repairs 75 mm size Stainless steel butt hinges medium weight, fixed to chowkhats complete all as specified and as directed by Engineer-In-Charge. |
| 120 | S & F in repairs 100 mm size stainless steel handle complete all as specified and as directed. |
| 121 | S & F in repairs 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and as directed. |
| 122 | S & F in repairs decorative knobs,handles for cupboard , shelves fabricated type polished handles, knobs complete all as specified and as directed. |
| 123 | S&F in repairs 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing/ taking down old beads complete all as specified and as directed. |
| 124 | M&L for preparation offloor/ paver/ path/chequered tile surfaces and applying a coat of glossy finish exterior emulsion paint of floor to match with existing colour or any other selected colour by usinghand roller etc complete all as specified and as directed by Engr-in-Charge. |
| 125 | S&F in repairs for mosaic tiles for fountain/swimming pool/ water pool of any size and colour fixed with mat/net to maintain the integrity of structure enchancing its visual appeal including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match and fixing properly with chemicals as required and removal of old tiles complete all as specified and directed by Engineer-in-Charge. |
| 126 | S&F in repairs for pigeon spikes of optimum height and angle, length of 30 cm for deterring pigeon and other birds from landing on surface of superior strength and longevity, remain robust effective in all weather condition set and jointed properly with chemicals as required and removal of old complete all as specified and directed by Engineer-in-Charge. |
