Tender For Repairing Works In P A Block Residence No. 20/1 And 21/1 At Canal Colony, Cantt Road, Lucknow.(Lot No.35) - Providing And Fixing Cupboard Shutter With 19Mm Thick One Sidedecorative And Other Side Balancing Lamination Factory Pressed Bwpgrade , Lucknow-Uttar Pradesh

Tender For Repairing Works In P A Block Residence No. 20/1 And 21/1 At Canal Colony, Cantt Road, Lucknow.(Lot No.35) - Providing and fixing cupboard shutter with 19mm thick one sidedecorative and other side balancing lamination factory pressed BWPgrade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc.with auto closing spring loaded hinges (hydraulic type) etc. completeas per direction of Engineer-in-charge.(Payment of providing and fixingauto closing hinges shall be paid separately) 2 Providing and fixing stainless steel fancy handle of approved make fixedwith SS screws etc. complete as per direction of Engineer-in-charge.for 200mm 3 Providing and fixing stainless steel soft closing spring hinges at 0 degreehinges (hydraulic type) of approved make/brand to cupboard shutterswith full threaded steel screws including making necessary recess inboard and finished etc. complete as per direction of Engineer-in-charge 4 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 5 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 6 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm 7 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 8 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore 9 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 10 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.l. Brackets and stainless stell plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 178 mm 11 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm 12 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

INR 590 /-

INR 3380.0 /-

Refer document