Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-03-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-04-2025 |
| Sl. No. | Item Description |
| 1 | B/R PORTIONComplete removal of entire existing water proofing treatment in any position, any thickness including tarfelt, Plaster, lean concrete, gravels etc. and removing the debries out side MD land complete all as specified and directed. |
| 2 | M&L for plain cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed. |
| 3 | M&L for plain cement concrete type B1 1:2:4(20mm graded aggregate) 40mm thick complete all as specified and as directed. |
| 4 | M&L for 10 mm thick rendering in cement mortar 1:4 over concrete surfacesmixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as \"Supply Only\" |
| 5 | Supply only WPC complete all as specified and as directed. |
| 6 | M&L for provding and carry out water proofing treatment to sound, moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injction grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixturesupplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects, application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Andulated surface and npot hole shall be treated with epoxy mortor or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufactures specification. Coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124) greater than 600 percentage, tensile strength (ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624), 15 KN/M, shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm /M2, water permeability (DIN-1048) -NIL, services temperature-40\" C to 70 degree \"c, flash point greater than 70 \"C HSE guidelines:- It is recommanded to provide adequate general and local exhust ventillations, providing protection to Eye, face, Hand andother skin by wearing appropriate glouse, google, face cilid, respiratory protection etc, directed in SDS of the product .Note: The guarntee and security deposit shallbe submitted by contractor as specifed and directed. |
| 7 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. |
| 9 | Demolition of Brickwork or stone masonary built in Cement mortarincluding all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 10 | Taking down chowkats or frame of wooden or steel Not exc 1.5 Sqm with shutters (without taking of shutter from the frame) complete all as specified and directed. |
| 11 | Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 12 | M&L for Brickwork with flyash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 13 | Taking down cement plaster, any description on brick, concrete or stonewalls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal ofrubbish outside MD land complete all as specified and directed. |
| 14 | M & L for Rendering 10 mm thick of fair faces of brick work or concrete workin CM 1;6. finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid saperately. |
| 16 | M&L 5 mm thick rendering in CM 1:3 on concrete surface of ceiling, finished even and smoothwithout using extra cement complete all as specified and directed. |
| 17 | M&L for complete removal of existing paint and applying two coats of oil bound distpemper over a coat of primeron old surfaces of wall including preparation of unplastered surface of wall complete all as specified and as directed. |
| 18 | M&L fortwo coats of oil bound distpemper over a coat of primer on New surfaces of wall ncluding preparation of plastered surface of wall complete all as specified and directed. |
| 19 | M&L for complete removal of existing paint and applying two coats of oil bound distpemper over a coat of primeron new/ old surfaces of ceiling complete all as specified and directed. |
| 20 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance exterior paint of required shed (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Lit/sqm over new/old surfacesincluding complete removal of existing paint by bio wash, necessary scaffolding required for painting work, safety measures etc complete all as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection complete all as specified and as directed. |
| 22 | S&F Flush shutter solid core 30mm Thick with block board core and plywood face panels commercial type on both side with lipping/frame to match complete all as specified and directed. |
| 23 | M&L preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 24 | S& F 2nd Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 25 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II complete all as specified and directed. |
| 26 | S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II2010 Refer item No. 8080 complete all as specified and directed. |
| 27 | S & F butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed. |
| 28 | S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed. |
| 29 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed. |
| 30 | S&F aluminium handles, anodised, cast type, of size 150 mm complete all as specified and directed. |
| 31 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets / AC boards, any thickness, including cover fillets complete all as specified and as directed. |
| 32 | M&L for Anodised aluminium snap grid frame workof size 605 X 605 mm for false ceiling including 4 mm dia GI mild steel wire complete all as specified and as directed. |
| 33 | M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed. |
| 34 | S&F in repairs 25mm dia powder coated aluminium draping rods corrugated of approved quality with brackets/dome suitable for 25mm dia pipes complete all as specified and directed. |
| 35 | S&F stainless steel chromium plated 6 Pin, 45CM to 60CM long hanger fixed to wall with screws complete complete all as specified and directed. |
| 36 | S&F three track sliding aluminium powder coated window with 4mm thick tinted glass in two shutter one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections complete all as specified and directed by Engr-in-Charge and including taking down old steel windows. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. complete all as specified and as directed. |
| 37 | Supply and fix for aluminium powder coated louvered ventilator with provision of opening forexhaust fan and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.Note : Exhaust fan shall be paid seperately. |
| 38 | M&L for4mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete complete all as specified and directed. |
| 39 | M& L for Silicon sealant for sealing of existing window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and directed. |
| 40 | M&L mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks, shed and similar work conforming to Fe-290. Gde-E-165 complete all as specified and directed. |
| 41 | M&L for Two coats of synthetic enamel paint over a coat of red oxide primer on old steel surfaces exc. 10 cm width or girth etc complete all as specified & directed. |
| 42 | M & L for 25mm thick plain cement concrete type B-1 1:2:4 (20mm Graded stone aggregate) as in sub base or levelling course complete all as specified and directed. |
| 43 | M&L fornon skid, ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but Not Exceeding 0.11 Sqmcoloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed. |
| 44 | M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 45 | M&L for mirror polished Kota stone slab 20-25mm thickinTread of stepsin single piecesincl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishingwith and incl 10mm thick screedin CM(1:4) complete all as specified and directed. |
| 46 | M&L for mirror polished Kota stone slab 20-25mm thickinriser or skirting of stepsin single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishingwith and incl 10mm thick screedin CM(1:4) complete all as specified and directed. |
| 47 | S&F in repairs Steel rolling shutters thickness of laths 1.25mm MS sheet, with necessary ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated but gear operated type with bevel gear box and crank handle, complete including taking down old shutter complete all as specified and directed. |
| 48 | S&F in repairs Steel rolling shutters thickness of laths 1.25mm MS sheet, with necessary ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated as indicated, complete:push pull or manual type, complete including taking down old shutter complete all as specified and directed. |
| 49 | Taking up or down steel tubing 15mm bore and connections including removing from site complete all as specified and directed. |
| 50 | All as per item here and above but 20 mm bore pipe complete all as specified and directed. |
| 51 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed. |
| 52 | M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubingand making good complete all as specified and directed. |
| 53 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 54 | S & F in repairs PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts complete all as specified and directed. |
| 55 | S & F in repairs vitreous china wash down water closet pan Pedestal any colour including fixing bolts etc including PVC seat cover white with flat PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted. |
| 56 | S&F in repairs vitreous china wash hand basin pedestal type, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia etc, 15mm bore CP fancy type pillar tap complete all as specified and directed. |
| 57 | S & F stainless steel grating doom 125mm dia complete all as specified and directed. |
| 58 | S&F in repairs Chromium Plated Toilet Paper Holder with flat recessed type dtsinless steel complete all as specified and as directed . |
| 59 | S & FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. |
| 60 | S&F in repairs Hand shower (health faucet) (ABS Chromium plated) suitable fo 15 mm dia pipe, 1.2mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 61 | S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete all as specified and directed. |
| 62 | S&Fin repairs 600x450 mm size of specified thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified & directed. |
| 63 | M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete complete all as specified and as directed. |
| 64 | M & L for decorative looking mirror 600 x 450mm beveled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with steel screw, complete all as specified and directed. |
| 65 | S&F in repairs Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed. |
| 66 | S&F in repairfancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed. |
| 67 | S&F in repairsbrass chromium plated tubular towel rail 20mm dia including brackets both side complete complete all as specified and as directed. |
| 68 | S&F brass chromium plated bracket for towel rail complete all as specified and as directed. |
| 69 | S & Fin repairs soap dish chromium plated of size 100 x 100 mm any type, chromium plated brass screws complete all as specified and directed. |
| 70 | M&L for reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement complete all as specified and directed. |
| 71 | M&L for concrete bed to drain pipes and haunching againstthe sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed. |
| 72 | M&L for plain cement concrete 1:3:6 type C2(using 40mm Graded stone aggregate) as in surface channels and drains including necessary form work for sauccer drain complete all as specified and directed. |
| 73 | Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred /stopped ends etc complete all as specified and directed. |
| 74 | S&F factory made 50mm thick 900 x 600mm manhole cover type KKLD with additional frameincluding reinforcement as per manufacturer\"s design and set in CM 1:4 and handles including demolition of old existing RCC cover (Reinforcement required to cut as facilitate to domolition) of any description and in any position complete all as specified and directed. |
| 75 | M&L for Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & toor finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complete all as specified and as directed. |
| 76 | S&Fin repairsPVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm bore complete all as specified and directed. |
| 77 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed. |
| 78 | S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore complete all as specified and directed. |
| 79 | S&F in repair for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mmincluding bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 80 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed. |
| 81 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed. |
| 82 | S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 83 | S&F PVC (SWR) bends any radius 75 mm bore with trap door complete all as specified and directed. |
| 84 | S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed. |
| 85 | S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed. |
| 86 | S&F PVC (SWR) gully traps 125/100 setting and jointed in cement solvent complete all as specified and directed. |
| 87 | M&L for plain cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base 75mm thick complete all as specified and directed. |
| 88 | M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers in not exc 15cm thick water and rammed to a true surface complete all as specified and as directed. |
| 89 | S&F 60 mm thick factory made chamfered edge cement concrete paver block, rubber mouldedof M-35 grade with approved colour desing & pattern as in footpath, parks over and including 50 mm thickness compacted bed of fine sand, compacting and proper embeding/ laying of inerlocking paver blocks into the samd bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as spfd and directed. |
| 90 | M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone agg) and settingin cement mortar (1:6)complete all as specified and directed. |
| 91 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:6 complete all specified and directed. |
| 92 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 40mm and dressing face beds and joints as specified to randomrubble wallingbrought upto courses complete all specified and directed. |
| 93 | Racking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses buit in cement or cement lime mortar complete all as specified and directed. |
| 94 | M&L for keyed pointing to randomor polygonal rubble uncoursed or brought upto courses in cement mortar1:4. complete all as specified and directed . |
| 95 | Dismantling structural steel work including door, gates, railingbut excluding framed struss complete all as specified and directed. |
| 96 | M&L for 304 grade stainless steel work as in railing made of hollow tubes,channels plates, etc with hand rail, baluster, including cutting, Stainless steel welding ,cutting, buffing, grinding, polishing and fixing of stainless steel baluster/railing with necessary all acessories andcomplete all as specified and directed. |
| 97 | Dismantling fencing wire mesh, any type complete all as specified and as directed . |
| 98 | Supply only, chain link fencing of MS galvanized fencing, any size or type as approved complete all as specified and as directed . |
| 99 | Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly. |
| 100 | S&F mild steel plain round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to FE-410-W ( Gde E 250) quality-A or Fe 290 (Gde E-165) complete all as specified and as directed. |
| 101 | M&L Mild steel flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and directed . |
| 102 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and directed . |
| 103 | M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 104 | M&L for preparation of new steel surfaces of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed . |
| 105 | Dismantling posts or struts (wood, steel or RCC), any section, including taking out embeded portion from natural ground and making good disturbed ground complete all as specified and directed. |
| 106 | Excavating in post holes (or similar holes) each n.exc 0.50 cum in any type of soil andgetting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil complete all as specified and directed. |
| 107 | M & L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregate ) as in foundation filling or mass concrete or simillar work complete all as specified and as directed . |
| 108 | M&L for mild steel angles as in post and struts in fencing incl cutting tops and shape as directed incl drilling holes, notching for wire etc conforming to Fe-410W (Gde E-250) etc of any description complete all as specified and directed. |
| 109 | E/M PORTIONTaking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and directed. |
| 110 | Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed. |
| 111 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed. |
| 112 | M&L Point wiring complete with 1.5 sqmm single core PVC insulated andunsheathed cable 1100 volts, FRLSH grade with multistranded copper conductor ISI marked drawn throughheavy duty PVC conduit concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxesincluding Modular box, modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed.(a) One light point/fanpoint controlled by one way switch. |
| 113 | (b) One 3 pin switch socket outlet point 5 Amps on independent board. |
| 114 | (c) One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 115 | (d) All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 3 core X 4 sqmm size. |
| 116 | S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 117 | S & Fix modular switch1 way 16A, 1 module complete all as specified and directed. |
| 118 | S & Fixmodular socketout let 6A 2/3 on combined 2 module complete all as specified and directed. |
| 119 | S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed. |
| 120 | S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed. |
| 121 | S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable from ceiling rose to tube light fitting complete all as specifed and directed. |
| 122 | S & FixLED tube light rod 18 wattswith necessary fixing arrangement etc complete all as specifed and directed. |
| 123 | S & FixLED tube light rod 10 wattswith necessary fixing arrangement etc complete all as specifed and directed. |
| 124 | Supply and fix exhaust fan made ofsturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep250mm including complete with all as specified and directed. |
| 125 | Supply and fixing wall mounted fan 400mm sweepcomplete with connected accessories complete all as specified and directed. |
| 126 | S & Fix of MCCB DB VTPN 4 ways, with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB\"s 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface complete all as specified and directed. |
| 127 | S & Fix of MCCB Four pole, 415 volts,63 Ampere, rupturing capacity 25 KA, complete all as specified and directed. |
| 128 | S & Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with suitable capacityamps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete. |
| 129 | S & Fix sheet metal enclosure distribution board SPN, 2 ways 240 volts, with suitable capacityamps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete. |
| 130 | S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 131 | S & Fix of MCB TP, 415 volts,63 Ampere, rupturing capacity 25 KA, complete all as specified and directed. |
| 132 | S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 133 | M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulatedcopper conductor single core cable, multistranded Cutting chases, pinning in. making good to facings Concealedand including suitable size ofConcealed conduit with itsall accessories all as specified and directed by Engr-in -charge for the following:-(a) 2x6 sq mm and 1x6 sq mm as earth wire Note : 2 Runs of 6 Sqmm wire,1 run of 6 Sqmm earthwire & PVC conduit shall be measured and paid as one length. |
| 134 | (b) 4x4.0 sq. mm +2x4.0 sq. mm earth wireNote : 4 Runs of 4 Sqmm wire, 2 run of 4 Sqmm earthwire & PVC conduit shall be measured and paid as one length. |
| 135 | (c) 2x1.5 sq mm and 1x1.5 sq mm as earth wire Note : 2 Runs of 1.5 Sqmm cable, 1run of 1.5 Sqmm wire & PVC conduit shall be measured and paid as one length. |
| 136 | (d) 4x6.0 sq mm and 2x6 sq mm as earth wire Note : 4 Runs of 6 Sqmm wire, 2 run of 6 Sqmm earthwire & PVC conduit shall be measured and paid as one length. |
| 137 | M & L forearthing complete with deep galvanised earth plate600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep bellow ground level with top edge of plate) not less than 1.5 m bellow normal ground level connected to galvanised earth led strip 25x 4 mm by means of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified or indicated including testing on completion.Note -Rate are including of excavation, PCC Pit, PCC/CI cover, fune, watering pipe, test point & earth lead upto 7.50m complete. |
| 138 | S& F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps capacity complete all as specified and directed. |
| 139 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 complete all as specified and directed. |
| 140 | Supply and laying tubes, Galvanised,\"medium \" grade, with all fittings and fixed to walls, ceiling or laying in floors, all as specified for following size:-(a) 50 mm bore pipe |
| 141 | (b) 20 mm bore pipe |
| 142 | (c) 15 mm bore pipe |
| 143 | Supply and fixing ofGun metal gate valveswith iron wheel head,screwed both ends for iron pipes complete, size of GM gate valve 50mm complete all as specified and directed. |
| 144 | All as per item here in above but size of GM gate valve 25mm complete all as specified and directed. |
| 145 | All as per item here in above but size of GM gate valve 15mm complete all as specified and directed. |
| 146 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in any type soil for foundation, cable, pipes etc complete all as specified and directed. |
| 147 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 148 | Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 149 | Supply, laying and testing cable LTXLPEInsulated ,screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size :-(a)120 sqmm 3.5 core |
| 150 | (b)95 sqmm 3.5 core . |
| 151 | (c) 35 sqmm 3.5 core |
| 152 | Supply & Laying double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement of size:-(a) 50 mm bore |
| 153 | (b) 25 mm bore |
| 154 | Supply and fixing GI tubing (ISI Marked), light grade for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed of size :- (a) 50 mm bore |
| 155 | (b) 25 mm bore |
| 156 | Supply Fabricate, install, connect, test and commission Outdoor type double door dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA powder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connectionusing new lugs complete with danger notice all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet Make: Any CPRI approved.Incoming : (a) LED/Neon indicator bulb in RYB Colour - 1 Set. (b) 4 No aluminium Bus bar 500amps with chamber. (c) Digital Multi function meter for showing Amps (upto 320 Amps) and Voltage (upto 500 voltage) with suitable CT and PT. (d) MCCB 4 Pole, 415 V, 320 Amps 36 KA- 01 Nos.Out going:(a) MCCB 4 Pole, 415 V, 250 Amps 36 KA - 01 Nos. (b) MCCB 4 Pole, 415 V, 63 Amps 25 KA - 02 Nos. (c) suitable cable gland for cable. |
| 157 | Supply Fabricate, install, connect, test and commission Outdoor type double door dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA powder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connectionusing new lugs complete with danger notice all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet Make: Any CPRI approved.Incoming :(a) LED/Neon indicator bulb in RYB Colour - 1 Set. (b) 4 No aluminium Bus bar 400amps with chamber. (c) Digital Multi function meter for showing Amps (upto 250 Amps) and Voltage (upto 500 voltage) with suitable CT and PT. (d) MCCB 4 Pole, 415 V, 250 Amps 36 KA Manual Drawout type with microprocessor release - 01 NosOutgoing: (a) MCCB 4 Pole, 415 V, 63 Amps 25 KA - 04 Nos. (b) MCCB 4 Pole, 415 V, 40 Amps 25 KA - 04 Nos. (c) suitable cable gland for cable. |
| 158 | Material and Labour for Earthing complete with with600 mm x 60 mm x 6.15 mm thick, galvanized steel earth plate electrode buried vertically in ground (not less than 2.25 meters deep below normal ground level),with top edge of earth plate not less than 1.5 meter below ground level connected to and including G.I strip of size 25mm x 4 mm by means of bolts/nuts/check nuts and washers of galvanized steel, GI Strip encased in and including 40 mm bore GI light grade protection pipe starting from top edge of the earth platelaid in ground/floors fixed on wall. GI strip to be connected with LT Panel with provision of charcoal dust & common salt all around the earth plate 15 cm layersincludingnecessary excavation and earth work in any type of soil/strata, provision of concrete earth pit using PCC 1:3:6 type C-2 including RCC cover using PCC 1:2:4 type B1 20 mm dia GI light grade with wire mesh and tunel for watering arrangement, complete all as shown on electrical plate No. 3 of SSR Part I includig testing after completion of earth complete all as specified and directed. |
| 159 | S&F GI Octagnal poles 6.0 mtr height (410 SP - 31) complete with MS base plate of 6mm thick of size 300mmx300mm, finial taper plug,pole cap, bolts, nuts and washers and screws,pole made out of ERW MS tubing confirming to relevant IS Specifications of poles. poles includingdrilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, complete with cast iron base plate finial taper plug bolts nuts and screws, including foundation and coping complete all as specified and directed. |
| 160 | Supply and installation ofLED Street Light fitting pressure die cast aluminium housing, heat resistant glass, IP 65 ptotection, better optics for uniform distribution of 60Watts capacity suitable for mounting on 6 meter single arms swan neck type pole with including testing on complete all as specified and directed. |
| 161 | Supply and Fix Weather proof Street light SMC/FRP Junction Box of size 270x225x135mm including MCB SPN 6 Amp `C\" Curve and connecting terminals 4-way and fixing with street light steel tubular pole using necessary MS Clamps, nuts, bolts washers of suitable size etc. including M& L fixing arrangement complete all as specified and directed. |
| 162 | Material and Labour for PCC 1:2:4 type B1 using 20mm gradedaggregate for coping of HT / LT poles including fair finishing the exposed surfaces even and smooth without using extra cement, including necessary form work complete all as specified and directed. |
| 163 | M&L for road cutting and making good the disturbed surfaces complete all as specified and directed. |
| 164 | Taking down old unserviceable LT UG cable of any type and measured as Sch of credit complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
