Tender For Maintenance Work Of Quarter Type-Iii/A-3, Of Shri Surendra Kumar Pal And Repair Of Staff Quarter Type I,Block A, Qtr No-4 Of Shri Subhash Das, Tu, Smnagar, Tripura-Tripura
TDR : 48049797
Tender Notice
BOQ
Expired
Tripura
Tripura
Tender For Maintenance Work Of Quarter Type-Iii/A-3, Of Shri Surendra Kumar Pal And Repair Of Staff Quarter Type I,Block A, Qtr No-4 Of Shri Subhash Das, Tu, Smnagar
Name of Work: MAINTENANCE WORK OF QUARTER TYPE-III/A-3, OF SHRI SURENDRA KUMAR PAL AND REPAIR OF STAFF QUARTER TYPE I,BLOCK A, QTR NO-4 OF SHRI SUBHASH DAS, TU, SMNAGAR
Sl. No.
Item Description
1
17.30 Chipping of unsound/weak concrete material from slabs,beams, columns etc. with manual Chisel and/ or bystandard power driven percussion type or of approvedmake including tapering of all edges, making square shoulders of cavities including cleaning the exposedconcrete surface and reinforcement with wire brushesetc. and disposal of debris for all lead and lifts allcomplete as per direction of Engineer-In-Charge17.30.3 25 mm average thickness
2
10.42 Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.10.42.1 Soluble Salt Stainfree vitrified tiles (Glossy) 10.42.1.1 Size of tile 600 mm x 600 mm
3
19.53 Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved qualityconforming to IS:8931 19.53.1 15 mm nominal bore
4
19.49 Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931 19.49.1 15 mm nominal bore
5
19.52 Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved makeconforming to IS:8931. 19.52.1 15 mm nominal bore
6
19.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain &brass threade dfittings including fixing the pipe with clampsat 1.00mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cementand testingof joints complete asper direction ofEngineer in Charge.Internal work -Exposed on wall19.7.2 20 mm nominal outer dia .Pipes.
7
13.10 Dismantling 15 to 40 mm dia G.I. pipe includingstacking of dismantled pipes (within 50 metres lead) asper direction of Engineer-in-Charge.13.10.1 Internal Work- Exposed on wall
8
14.23 Dismantling old plaster or pointing, raking out joints,cleaning and preparing the surface for re-plasteringor re-pointing including disposal of rubbish to thedumping ground with all leads and lifts etc.completeas per direction of the Engineer- in-charge.
9
13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:13.30.1 With cement mortar 1:3 ( 1 cement : 3 fine sand ).
10
12.19 Providing and applying plaster of paris putty of 2mmthickness over plastered surface to prepare the surfaceeven and smooth complete.
11
12.56 Wall painting with acrylic plastic emulsion paint ofapproved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] : 12.56.1 Two or more coats on new work
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
