|
| 1 | Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. |
| 2 | Material and labour for providing 100 mm thick Cement Concrete(1:2:4) type B1 using 20 mm graded aggregate as in hard standing finished concrete surface even and smooth without using extra cement all as specified and directed |
| 3 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick backing coat in CM 1:4 etc complete all as spd and as directed. |
| 4 | M&L for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed. |
| 5 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as spd and as directed. |
| 6 | S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site etc complete all as specified anddirected. |
| 7 | Use and waste offormwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished surface complete all as specified and as directed by the Engr-in-Charge. (upto 04 storey height of building) |
| 8 | Material and labour for providing Reinforced Cement Concrete(1: 1 ½ : 3) type A1 using 20 mm graded aggregate (nominal mix) as in beams, cantilever, lintels over 1.5 m all as specified and directed. (upto 04 storey highbuilding) |
| 9 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified anddirected. (upto 04 storey High of building) |
| 10 | S&F TMT bars 8 mm dia and over as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified anddirected. (upto 04 storey High of building) |
| 11 | Demolition of Cement Concrete (un-reinforced) in floors/ roofsand Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified anddirected. |
| 12 | M&L for 25mm thick PCC(1:2:4) type \"B-1\" (using 20mm graded crushed stone aggregate) as in floor finished fair and even without using extra cement complete all asspecified anddirected |
| 13 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.. |
| 14 | M&L for rendering 10 mm thick in CM (1:6) onfair face of brick work or concrete surfacesand finished the surface even and smooth without using extra cement complete all as specified anddirected. |
| 15 | M&L for rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surfaceeven and smoothas in ceiling complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building). |
| 16 | M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper (oil bound distemper) over a coat of alkali registant primer with 3mm thick wall care putty. complete all as specified anddirected by Engineer-in-charge. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying two coat of acrylic distemper (oil bound distemper) over a coat of alkali registant primer with 3mm thick wall care putty complete all as specified and as directed by Engineer-in-charge. |
| 18 | M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registant primer and one coat of wall putty (2 mm thick) to match with the new surface on wall. complete all as specified and as directed by Engineer-in-charge. |
| 19 | M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registant primer and one coat of wall putty (2 mm thick) to match with the new surface on ceiling, complete all as specified and as directed by Engineer-in-charge. |
| 20 | Demolition of stone slabs, floor hearth , wall and floor tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar and throw rubbish off the premises (out of MOD land), etc complete all as specified and directed by Engineer-in-charge. |
| 21 | M & L for colour Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as specified anddirected. |
| 22 | S&F Non - skid Ceramic tiles coloured tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L 18-20mm thick granite slab in window cills, cooking platform , steps of stair case etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laidover screed bed 20mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge |
| 24 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm. complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm. complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm, complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repairs20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building) |
| 29 | S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe, as in repairs, complete all as specified and directed. |
| 30 | S&F in repair 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. |
| 31 | S&F Chromium plated brassAngular stop cock, fancy type,concealed type with wall flange fixed to 15 mm bore iron pipe complete all as specified and directed. |
| 32 | S&Fin repair cascade type Rimless Single Piece WC floor mounted water closet withflushing cisternwith floor trap, with slim soft close seat cover and connecting pipe and fixing Accessories and cistern fittings etc complete all as specified and as directed. Make- CERA cimba rimless cat no- S1013218,Jaquar Cat no. - OPS-WHT-15853S300UF or equivalent make specified in tender. |
| 33 | S&F in repairs Door closer hydrau- lically regulated ( Aluminium extruded section)designation No. 2 universal type, suitable for door shutters ofupto 851 mm in width and of weight between 36 to 61 Kgscomplete all as specified and directed. |
| 34 | S&F in repair CI Nahani trap of 100mm dia, includingjointing to waste pipe fixed in cement concrete,(1:2:4) type B1 (using 20 mm graded crushed stone aggregate). .complete all as specified and as directed by Engineer-in-charge. |
| 35 | S&F PTMT grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge. |
| 36 | S&F PTMTtubular towel rail 450mm long, with and includingCP brass screws and wooden/plastic cleats, weight not less than 170 gms complete, fixed in wall complete all as specified and as directed by Engineer-in-charge. |
| 37 | S&F Chromium plated brass central hole basin mixerwith pop-up- waste system with 450 mm long copper pipe and brass nut etc fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed. Make- Jaquar Cat no-KUP-35011BPM or equivalent make specified in tender. |
| 38 | S&F in repair 15mm bore two in one bib cock with wall flange chromium plated (Premium range) complete all as specified and as directed.(Make : Jaquar cat no- FLR-CHR-5041N or equivalent make specified in tender. |
| 39 | S&F in repair 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. (Make :Cera - Cat no- F8030111AB , JAQUAR Cat No.ALD-579 . (chrome) or equivalent make specified in tender. |
| 40 | S&Fin repair Soap Dish (Polycarbonate) complete all as specified and as directed. ( Make : jaquar) Cat No. AQN-7733(chrome) or equivalent make specified in tender. |
| 41 | S&Fin repair Soap Dispenser with Glass Bottle complete all as specified and as directed. ( Make :Cera - Cat no- F5013111CH) ( Make : jaquar) Cat No. ACN-1135N (chrome) or equivalent make specified in tender. |
| 42 | S&Fin repairtumbler holdercomplete all as specified and as directed. Make :Cera - Cat no- ( Make : jaquar) Cat No. ACN-1141N(chrome) or equivalent make specified in tender. |
| 43 | S&F in repair Any Size 6 mm thick bevelled edge mirror of selected quality glass, moulded on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 44 | Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed. |
| 45 | M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius buit in CM 1:6.complete all as specified and as directed. |
| 46 | M & L for brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 etc complete all as spd and as directed. |
| 47 | Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fittings heads shoes bends swan -necks etc including cleaning or refixing or removal to store (measured over all fixed along the centre line over fitting and ( accessories) |
| 48 | S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 49 | S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 50 | S&F Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work( as in cup board)including taking down old one. |
| 51 | S&F Decorative laminate type ( 0.9mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as permanufacturer\"s instructions complete all as specified and as directed. |
| 52 | S & F Continuous (piano) hinges in brass bright finish ,width of flap 40 mm complete all as specified and as directed. |
| 53 | S&F 40mmdia,cupboard knobs fixed with nut, screw and washer in brass polished and bright finished complete all as specified and as directed. |
| 54 | S&F multi purpose cupboard lock ( Brass finish) of 65 mm size in 4 lever complete all as specified and as directed. |
| 55 | S&F cupboard magnets heavey duty complete all as specified and as directed. |
| 56 | S & F MS angle, flats , etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250) quality A as roof truss including drilling holes for nuts and bolts and similar work complete all as specified and as directed. |
| 57 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 58 | S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed |
| 59 | S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed |
| 60 | S&F for 1.25mm thick plain, black, mild steel sheeting, in doors, valley gutters, drip and straight flashings (length and girth as fixed) in provided to welding complete all as specified and directed. |
| 61 | M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 62 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 63 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 64 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed. |
| 65 | S&Ffactory made solid PVC Moulded Door Shutter, with particle board core 28mm to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick mouldedd PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as per specified and as directed. |
| 66 | S&F Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , supplying & fixing in opeinging all as per specified and directed. |
| 67 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed |
| 68 | S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in-charge. |
| 69 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 70 | S&F in repair powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates including joining cleat, neoprene rubber etc for fixing etc complete all as specified. |
| 71 | S&F in repair anodised Powder Coated aluminium Shutter(Size 41mmx20mm 1.60mm railing size 20mm) @0.50Kg/Rm windows, ventilators with one or more rebates including joining cleat , neoprene rubber etc for fixing for fixing etc. complete all as specified |
| 72 | S&F anodised powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified and directed.(NOTE: Quoted rate shall be deemed to include for all hardware, lock and sheet glass) |
| 73 | S&F 5.5 mm thick selected quality toughened glass fixed in aluminium / Upvc beads (beading included with shutter ) oras in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed |
| 74 | S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed. |
| 75 | S&F for 12 mm thick toughned glass as in Hinge door and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 76 | S&F for H shape, pull handle , 300 mm long, 25 mm dia stainless( SS 304 )steel handle in toughened glass door , complete all as specified and directed. (Note:- Each pair will contain one handle both face of door) |
| 77 | S&F for mortice centre lock C or round shape glass to wall lock ( Corrosion resistive) suitable for 12mm thick toughened glass door complete all as specified and directed. |
| 78 | S&F in repair vitreous chine wash hand basin Table Topof size 565mm x 420mmx140mm (any selected colour) Product Range complete all as specified and as directed. Make :- Cera calburt cat no- S2020137 , (KUBIX) Make :Jaquar Productcode no- KUS-WHT-35935 or equivalent make specified in tender. |
| 79 | (E/M PORTION)Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge. |
| 80 | M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board onexisting wall surface for one light/fanpoint /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. |
| 81 | All as per Item No 80 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed. |
| 82 | All as per item No 80 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed. |
| 83 | All as per Item No 80 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 2.5 Sqmm FRLScopper cable for earth continuity wire complete all as specified and as directed. |
| 84 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 85 | S&F sub main wiring with 2 run of 2.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC casing/caping (25mm dia) including size 2.5 sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB\"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed. ( NOTE :- Two runs of 2.5 Sqmm pvc wire, one run of 2.5 Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit |
| 86 | Supply and fixingsub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 2.5 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing capingafter taking out old un serviceable wring completeand including PVC casing caping all as specified and as directed.Note : (i) Two run of single core cable 4 sq mm and one run earth wire 2.5 sq mm will be measured as one length.(Make: RR,KEI and Finolex for copper Cable and Prestoplast/Plaza forcasing/conduit) |
| 87 | S&F for switch piano flush type 5 Amp single pole one way complete all as specified and as directed. |
| 88 | S&F for socket flush type 5 Amp 5 pin completeall as specified andas directed. |
| 89 | S&F for switch socket combination 5 Pin 5 Amp universal complete all as specified and as directed. |
| 90 | S&F for switch socket combination 5 Pin, 5/15 Amp universal complete all as specified and as directed. |
| 91 | S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 92 | S&Fsheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB\"s and including making good the disturbed surface and matching with existing colour complete all as specified and asdirected. |
| 93 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCCB’s/MCB\"S/Isolators, 240 Volt, Vertical TPN DB\"s 4 way with built in160A rated bus bar and with out MCCBcomplete after taking down old unserviceable DB\"s and including making good the disturbed surface and matching with existing colour complete all as specified and as directed. |
| 94 | M&L forMCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 25KA complete all as specified and as directed. |
| 95 | M & L for MCB, SP, 240V, 6 to 32 Amps and \" C \" series breaking capacity 10 KA ISI markedcomplete, all as specified and as directed. |
| 96 | M & L for MCB, SPN, 240 V, 40 Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed. |
| 97 | Supply & fixingwall mountedfans 230 volts singlephaseoscillating 400 mm sweep with white/Black Color with following technical specification Box Dimension 48x24.5x47.5cm wattage 35W ,Air Delivery (CMM)76 Blade Length 40CM,Speed 1500RPM, Item Weight 4.2Kg Voltage 165-285V, Blade Material ABS PLastic including all Fixing accessories for fixing at Wall complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as directed . |
| 99 | S & F in repair clamp with buckle for hanging ceiling fan with down rod of any size or with nut and bolts /Welding if any complete set all as specified and directed. |
| 100 | S & FBLDC ceiling fans of 1400mm sweep with canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed. |
| 101 | Supply and install split units indoor/outdoor complete with cordless remote control with minimum 5 starrating inverter typeof capacity 1.5 TR , copper condenserincluding 2.5sqmm 4core flex cable connection from indoor to outdoor unit as per site requirement including necessary masonry work for making gooddistrubuted surface and match with the existing colour complete all as specified. . Model No. FTKM50TV16VC/FTKM50TV16VF of Daikin or Equivalent in Hitachi / O-General or equivalent make specified in tender. Note:-1. Extra Copper pipe and electric wirerequired other than Pre packed with AC will be measured and paid Separately. |
| 102 | Supply and draw submain wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, un sheathed conductor in PVC Casing Cappingincluding 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed. |
| 103 | Supply and laying refrigerant line copper tubing of size 1/2 \" with clamping on wall surface or concealed with both the ends connection complete all as specified and as directed. |
| 104 | All as per item Ser No 103 here - in - before but of size 1/4 \" |
| 105 | S & F foam insulation for copper tubing dia 1/2\"\" and 1/4\"\" complete all as specified and as directed. |
| 106 | S & F drain pipe 1/2\" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and as directed. |
| 107 | Supply and fixing angle iron bracketswall mounted / Floor mounted as per sitemade ofsteel including two coats of powder coated finish and foundation bolts and nuts firing complete and making good the disturbed surface complete all as specified and as directed. |
| 108 | S & F North West Socket for AC short circuit protection motor starterwith MCB DP 25 Amps capacity AC230 Volt with Plug Top with Indicator complete all as specified and as directed. Make:Cat No. ACPU6M-BT, make :Wipro( North-West) or equivalent make specified in tender. |
| 109 | Supply and drawwiring with One 4 core 2.5 Sqmm PVC insulated copper cable 1100 volts grade multi stranded from indoor to Outdoor unit duly properly connected with copper lugs suitable at site complete all as specified and directed. |
| 110 | S & F MCB \"B\" curve single pole neutral , 32 Amps with breaking capacity 10kA complete all as specified and as directed. |
| 111 | S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, Plastic body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding, pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed. |
| 112 | Supply , installation and commissioning of 3 phase 415 Volts ,Air Cooled Vertical type Air conditioner energy efficient with minimum 3 star ratingindoor and Outdoor Complete with Cordless remote control unit , Scroll compressor of Capacity 2.0TR complete all as specified and directed : Make :- Model No. FVRN100AXV16 ofDaikin /Hitachi/O -General or equivalent make specified in tender. |
| 113 | Supply and draw submain wiring with four single core 10 sq mm FRLSPVC insulated copper cable 1100 volts grade multi stranded, un sheathed conductor in PVC Casing Cappingand10 sq mm multi-strand FRLS PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed. |
| 114 | Supply and laying refrigerant line copper tubing of size 5/8 \" with clamping on wall surface or concealed with both the ends connection complete all as specified and directed. |
| 115 | All as per item Ser No 114 here - in - before but of size 3/8 \" |
| 116 | S&F Nitrile Rubber insulation for copper tubing of size 5/8\"\" diaduly wrapped complete all as specified and directed. |
| 117 | S&F Nitrile Rubberinsulation for copper tubing of size 3/8\"\" dia duly wrappedcomplete all as specified and directed. |
| 118 | S & F drain pipe 5/8\" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and directed. |
| 119 | Supply and fixing angle iron bracketsbracings, supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats of suitable size etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed |
| 120 | M&L for sheet metal enclosure for DBs SPN 4 way 240 V, with 200 A rated bus bar double door, complete flush mounted all as specified and as directed |
| 121 | M&L for MCBFour Pole 240 volts 40 Amp capacity C Curve Complete all as specified and directed. Cat No.408700 of Legrand or or equivalent make specified in tender. |
| 122 | Supply and fixing copper cable6.0sqmm 4 core duly connected and properly clampedfrom indoor unitto Outdoor unit complete all as specified and directed |
| 123 | Excavation in trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for laying of UG Cable/Pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed. |
| 124 | Excavation/Cutting Road/ Hard standing in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth and getting out, complete all as specified and as directed. NOTE : Quoted Unit Rate shall deem to be included Materials and Labour required for repairing to damaged Road/ Hard standing to match the existing Surfaces and Specifications. |
| 125 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in Soft/ Loose Soil, complete all as specified and as directed. |
| 126 | Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 127 | M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180Cm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured. |
| 128 | Supply & laying in trenches Sub-class ‘B’ Bricks, kiln burnt, for Cable Protection, complete all as specified and as directed. |
| 129 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core |
| 130 | Design, fabricate ,supply ,testing and commissioning of LT feeder pillar box out door typeof adequate sizefabricated with 3.15mm thick CRCA sheet steel front and rear openable vertical cubical type installed over properly supported legs suitability grouted to PCCwith copper bus bar of 300 Amps, phase indicator lamps & internal wiring including the following accessories.( Loc:- Near Communication Hub).(a) INCOMING (i) MCCB 160 Amps, 4 pole, 415 V, 36 kA - 02 No (ii) Manual Change Over Open execution type-01(b) OUTGOING(i) MCCB 100 Amps, 4 pole, 415 V, 25 kA - 02 Nos (ii) MCB DP 6-32 Amps, 240 V, \"C\" curve, 10 kA -01 Nos(iii) Digital Multifunction meter with 3 Nos CTs & selector switch - 1set(iv) Space One MCCB 4 Pole 100 Amps |
| 131 | Supply and Laying of Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS-15658-2006 of 60 mm thickness, M-35 gradewith 6 mm top layer of coloured rubberised anti abrasive material complete all as specified and directed. |
| 132 | Material & Labour for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in foundation of pole complete all as specified and directed. |
| 133 | S&F Heat shrinkable straight through Jointing Kit suitable for 1.1 kv grade XLPE insulated stranded aluminium conductor cable including testing on completion complete all as specified and directed by the Engr-in-Charge of size 70 sqmm to 95 sqmm. |
| 134 | M & LEarthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate at a depth not less than 1.5 Mtr below normal ground level surrounded from all sides by 15 cms thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including galvanised earth Strip of size 25X4 mm size upto 7.5 mtr by means of bolts, nuts, checknuts and washers made out of galvanised iron and protected by medium grade 50 mm dia 5 mtr long and connected to main control panel and GI pipe 20 mm medium grade as watering pipe including funnel, wire mesh, PCC Pit made up of PCC 1:2:4 type C2 and RCC cover 40 mm thick with 8 mm bar 15 c/c including excavation and earth work all as specified in SSR Part -1, 2010. |
| 135 | Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
