|
| 1 | Removing the existing warnout plastered surface in ceiling and walls and clearing away the depris etc.,complete complying with standard specification. |
| 2 | Chipping existing Plain CC cement concrete and roughening the surface& removing the debris from the site depositing same as directed by the engineer. |
| 3 | Servicing the Existing windows/such as changing the damaged glass, furniture fittings and also smoothly operation for open and close etc. the rate is inclusive of all labour charges and cost of materials etc. Complete Complying with standard specifications. |
| 4 | Servicing the Existing Doors such as changing the damaged furniture fittings and the operation of for smoothly with open and close etc. the rate is inclusive of all labour charges and cost of materials etc. Complete Complying with Standard Specification. |
| 5 | Special ceiling plastering and finishing all the RCC exposed surface such of RCC slabs sunshade, canopy, staircase steps landing slabs etc., with CM 1:3 (One of Cement and three of sand) 10mm thick hacking the surface and providing cement mortar no sing beading wherever necessary using the same mix as directed by the department officers etc., complete complying with standard specifications. |
| 6 | Granolithic flooring with cement concrete 1:2:4 using 25mm thick into water proofing compound including cost and conveyance of all materials and all labour charges as per standard specification. |
| 7 | Paving the floor with best quality Double charged Vertified Tiles - 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 8 | Dadooing walls with following best approved quality, white / colour glazed tiles of size 300 X 200 X 6mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 9 | Paving the floor with anti-skid tiles for flooring of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. |
| 11 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. |
| 12 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. |
| 13 | 32mm dia (1\") |
| 14 | 25mm dia (3/4\") |
| 15 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements. |
| 16 | 32mm dia (1\") |
| 17 | Tee |
| 18 | Elbow |
| 19 | 32x25 Reducer |
| 20 | Coupling |
| 21 | MTA |
| 22 | FTA |
| 23 | 25mm dia (3/4\") |
| 24 | Tee |
| 25 | Elbow |
| 26 | 25x15 Reducer |
| 27 | Coupling |
| 28 | MTA |
| 29 | FTA |
| 30 | Supplying and fixing in position first quality and approved variety of Gun metal Wheel Valve ( 32 mm Dia ) with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Engineer incharge before use on work. |
| 31 | Supplying and fixing in position GI unions (32 mm Dia ) of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete complying with standard specifications. |
| 32 | Supplying and fixing in position 15mm dia long body tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 33 | Supplying and fixing in position 15mm dia short body CPtap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 34 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. |
| 35 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. |
| 36 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. |
| 37 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. |
| 38 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes of 110mm dia having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 39 | Supplying and fixing in position best quality PVC soil waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level. |
| 40 | 110mm dia PVC Pipe |
| 41 | 75mm dia PVC Pipe |
| 42 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 43 | 110mm dia |
| 44 | Tee |
| 45 | Door Elbow |
| 46 | Elbow |
| 47 | Cowl |
| 48 | 75mm dia |
| 49 | Tee |
| 50 | Door Elbow |
| 51 | Elbow |
| 52 | Cowl |
| 53 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. |
| 54 | Providing inspection chambers of various sizes using 9\"thick brick walls using second sort table moulded camber burnt bricks of sizes 9\"x41/2\"x3\" in C.M 1:3 12mm thick a precast cover slab of 75mm thick shall be provided for the chamber the rate includes nessary earth work excavation to the reuired depth P.C.C 1:5:10 in 75mm thick etc complete complying with standard specification. |
| 55 | Supplying and fixing in position of Solid PVC Door shutter using 19 guage 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails.The steel tubes shll be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable suitable rabate for housing the shutter. |
| 56 | Dismantling, clearing away and carefully stacking materials of Weathering Course with warnout Pressed Tilesdirected by the Departmental officers Complying with standard specification. |
| 57 | Finishing the top of roof with one course of approved best quality Solar reflective ceramic Cooling tilesof size 305mm x 305mm x 7mm laid over cement mortar 1:3 (one cement and three sand) 20mm thick mixed with water proofing compound confirming to IS. Specification at 2% by weight of cement used and joints pointed neatly to full depth of tiles with same mortar mixed with water proofing compound and red oxide etc., complete complying with standard specification. |
| 58 | Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complyingwith standard specification. |
| 59 | Painting old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour after thorough scrapping of old paint with manual labourers in all floors including the cost of primer etc., complete complying with standard specification. |
| 60 | Sub total |
| 61 | GST @ 18% |
