|
| 1 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.Group B |
| 2 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required |
| 3 | 6 Module |
| 4 | 8 Module |
| 5 | 12 Module |
| 6 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. |
| 7 | 5 amps switch |
| 8 | 5 amps socket |
| 9 | 15 amps switch |
| 10 | 15 amps socket |
| 11 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 13 | S/D the following size FRLS of PVC insulated copper conductor cable in the existing surface/ recess PVC conduit as required. |
| 14 | 1 x 1.5 sq.mm |
| 15 | 2 x 2.5 sq.mm |
| 16 | 2 x 4 sq.mm |
| 17 | 2 x 6 sq.mm |
| 18 | Supplying and fixing of 25mm heavy duty class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 19 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB \"C\" curve including connections, painting etc. as required. |
| 20 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 21 | 2x10 + 1x 6 sq.mm |
| 22 | 4x10 + 2x6 sq.mm |
| 23 | Supplying and fixing following waysingle pole and neutral sheet steel of MCB distribution board of 240 volts on surface/ recess completetinned copper bus bar, neutral link, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 12 way, Double door |
| 24 | Supplying and fixing of 12 way 4+36way double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 25 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 26 | Single pole |
| 27 | Single pole and neutral |
| 28 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 amps |
| 29 | S/F/ testing & commissioningof pre wired LED single box type fitting (1x20 watts) complete with all accessories on the existing surface/ down road i/c connection witih 1.5 sqmm FRLS PVC copper conductor cable in suitable size PVC sleeve etc. as required having 1 Nos. of 18 watts MAS LED tubelight. (TMC 501 P 1XT-LED 20W P3241) (Philips make) |
| 30 | S/F/ testing & commissioningof pre wired LED double box type fitting (2x20 watts) complete with all accessories on the existing surface/ down road i/c connection witih 1.5 sqmm FRLS PVC copper conductor cable in suitable size PVC sleeve etc. as required having 2 Nos. of 18 watts MAS LED tubelight. (TMC 501 P 2XT-LED 20W P3241) (Philips make) |
| 31 | S/F of 18 watts MAS LED tubelight in the existing fitting i/c making connection etc. as required |
| 32 | Servicing/ painting the rusted panel with two or more coat i/c rubbing the corrossion and painting the same with spray machine i/c dressing wires/ replacement of burnt thimbles etc. i/c welding |
| 33 | S/F of following size exhaust fan complete with all accessories i/c having suitable louver shutter etc. as required. |
| 34 | 15\" exhaust fan |
| 35 | S/F of snap -on DLP trunking of 80 mm x 50 mm with suitable coveron the existing wall/ surface i/c having all the accessories such as flat angle, end caps, internal /external , angle etc. as required at site. |
| 36 | Dismantling the existing accessories and depositing the same at Engineering Store. |
