Tender For Community Center Located At Bariyaghat In Ghantaghar Ward Restoration Work Of The Building . - Dismentling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet) (SI No-706) 2 earth work excavation in foundation in ordinary in all comp work. 3 cement concrete with 4cm gauge approved stone ballast in all comp work. 4 M-150 brick in 1:3 cement and coarse sand of mortar in all comp work. 5 Supplying of KIRLOSKAR PORTABLE 5kVA GENERATOR (velgenerators.com) 6 Providing and placing on tarrace (at all floor levels) Polyethylene water storage tank, IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 7 25 mm thick. 1:2:4 plain C.C Floor with cement, approved coarse sand and 20mm graded approved stone laid in panels finished with 3 mm flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 8 cm thick. Base concrete consisting of cement, local sand and brick ballast 4 cm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and given them a uniform finish including supply if all materials, labour and T&P etc., required for completion of the work. SI No- 601a 8 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.CPWD CODE NO-12.53 9 12mm thick plaster with cement mortar in consisting of 1:3 cement and approved coarse sand of minimum thickness not be less than 10mm including supply of all materials, labour T&P etc. required for proper completion of the work. SOR No- 584 10 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : CPWD CODE NO- 11.26.1 11 One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc, required for proper completion of the work.SI No- 649 12 Wall painting (two coat) with plastic emulsion paint of First quality approved brand and manufacture on undecorated wall surface to give even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand prepared smooth. SI No- NBO 18:57 13 Mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, records racks roof work, gates etc. Wrought to required form, including drilling holes, riveting or welding where necessary, and also including supply of steel, bolts nuts and wastages etc. amd their fixing requirement for completion of the work. SOR NO- 503 (as per market wt) 14 supplyingand fixinf of 150mm dia pvc pipe in all comp work. 15 Providing and laying vitrified floor tiles Kajaria KERRO Brand or Equivalent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0-8% and confirming to IS 15622 of approved make in colors & shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) including grouthing the joints with white cement and matching oigments etc complete. (Size of tiles 600x600mm) CPWD 11:41:1 16 Painting or Varnising on iron work in small areas on new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & O etc. required for proper completion of thework. Paint to be used should conform to the I.S.I No.103 - 1950SI No- 641 17 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m² DSR-12.1.1-13.33% GST & Labour Cess 18 Screpping, Putty, Painting & Plaster work, Door and window maintanance 19 for shutter of doors window ventilator in all comp work. 20 Designing fabricating testing protection installing and fixing in all comp work. 21 Instalation of 4 star FTKP50 1.5tone Daikin Split Air condition with all comp. work (India mart) 22 Disposal of malba to 5 km distance in including all comp work 23 S/f of submersible with boaring in all comp work. 24 supplying and fixing of w.c seat in all comp work. 25 supplying and fixing of urinal besin all comp work. 26 Add extra for Plumbering work including all complete of work 27 Add for Electrification work (Including Wire, Wiring, Fan, LED light, Meta light etc.) 28 construction of inaugruation of pedestal including all comp. work (Analysis) 29 Extra head load but payment will be done as per site 2% 30 G.S.T 18%
