|
| 1 | Earth work in excavation by manual means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level 1:5:10 (1 Cement:5 coarse sand:10 Graded stone aggregate 40mm nominal size) |
| 3 | Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level 1:3:6 (1 Cement: 3 coarse sand: 6 Graded stone aggregate 20mm nominal size) with 30% boulder. |
| 4 | Providing and laying in position specified grade of Reinforced cement concrete incld. curing but excluding the cost of centering , shuttering, finishing and reinforcement all work upto plinth level with 1:1.5:3 (1 Cement:1.5 Coarse sand:3 Graded stone aggregate 20mm nominal size) |
| 5 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 6 | Steel Reinforcement for RCC Work including straightening,cutting,bending,placing in position and binding all complete above plinth level . Thermomechanically treated bars of grade Fe-500D or more |
| 7 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 9 | centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns |
| 10 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 11 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 12 | Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 13 | Carriage of material by mechanical transport from source to the site of work including loading/unloading and stakcing complete. |
| 14 | Sandfor an av. 80Kmsdisntace. |
| 15 | Bajree/Stone aggregates below 40mm nominal size for an av.distance 20 Kms |
| 16 | Stonefor an av.distance 20 Kms |
| 17 | Bricksfor an avg. lead of96 kmsdistance |
