Tender For Additional And New Dt Work Under Nagar Nikay, Under Ee,Edd,Barabanki. - Safe Loading Carriage Including Unloading And Proper Stacking Of Following Materials From Central Store Barabanki / Je Store To Site Of Work. 2 Pcc Pole 8.5 Mtr Long 3 , barabanki-Uttar Pradesh

Tender For Additional And New Dt Work Under Nagar Nikay, Under Ee,Edd,Barabanki. - Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work. 2 PCC POLE 8.5 MTR LONG 3 STP Pole 11 Mtr 4 T/F11/0.4KV, 63 KVA 5 T/F11/0.4KV, 100 KVA 6 T/F11/0.4KV, 250 KVA 7 MS Top Channel 8 T-off Channel 9 MS Channel (Dropper) 10 LT ABC (3*120+1*95+1*16) SQMM 11 LT ABC (3*95+1*70+1*16) SQMM 12 LT ABC (3*50+1*35+1*16) SQMM 13 Single Core L.T Cable (1*240)SQ MM 14 Single Core L.T Cable (1*400)SQ MM 15 Single Core L.T Cable (1*120)SQ MM 16 11 KV Composite Polymer Pin Insulater 17 11 KV Composite Polymer Disc Insulator With Fitting 18 Earthing Rod 19 ACSR WEASEL CONDUCTOR 20 ACSR Rabbit CONDUCTOR 21 GI wire 8 SWG 22 Stay Set complete 23 Substation Base angle 24 Dragging of pole from JE Dump Store to site 25 Grouting Of STP/PCC Pole 26 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting. 27 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 28 Mounting of 63 KVA Tranformer 29 Mounting of 100 KVA Tranformer 30 Mounting of 250 KVA Tranformer 31 Stringing and sagging of 11 KV line with ACSR Weasel Conductor including nuzzling binding and jumpering (Weasel conductor will be provided by the department) 32 Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) 33 Errectionof Substation type double pole with ST/PCCincluding mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 34 Errectionof singlePCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 35 Stringing and Sagging of LT single core Cable (1x120+1x400+1x120) SQMM (LT Cable will be provided by the department) 36 Stringing and Sagging of LT ABC Cable(3*120+1*95+1*16) & (3*95+1*70+1*16)and (3*50+1*35+1*16) SQMM (LT Cable will be provided by the department) 37 MS Earthing Rod. 38 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 39 Nut & Bolt 40 Clamp for Top/ Dropper and T-off Channel etc. 41 Dead End Clamp 42 Suspension Clamp 43 Holding Clamp 44 Insulated Piercing Connector 16-120 sqmm 45 Dead End Insulator 46 I-J Hook 47 Al Lug 95 sqmm 48 Al Lug 120 sqmm 49 Al Lug 240 sqmm 50 Al Lug 400 sqmm 51 11 KV D.O FUSE SET Complete 52 Construction Of LT DistriBution Cum LT Protection Piller Box MS Angle in RectangleSize 50x50x6 MM 7.5Meter long For installation Of Henley Type Tailleness Fuse Unit 300 AMP 650 Volt For 3 nos Outgoing Circuits With Copper Bus bar OF size 1000x50x6 mm Including Proper Grouting of Structure By Digging OF pits Off Size 300x300x600 mm With the Help Of Cement, Coresand And Aggregate in the ratio 1:3:6 And Fabrication of structure Complete. 53 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 54 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4 thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 55 Erection of pipe type earthng for DT with the help of B-Class G.I pipe of size 1.5 inch dia, 40 feet deep boring by providing G.I strip 50x6 MM, 6 meter long attached with clamp L-piece nut & bolt & G.I cap

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	28-02-2025	DATE EXTEND	Date	04-03-2025

INR 3540 /-

INR 41000.0 /-

INR 40.93 Lakhs /-