|
| 1 | Dismantling tile work in floor and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead. For thickness of tiles 25 mm to 40mm (PWD BSR 2022 Page No B14/159 Item No. 14.23.2) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground ground within 50 mtr lead (PWD BSR 2022 Page No B14/162 Item No. 14.55) |
| 3 | Dismantling stone rubble masonary including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead.in cement Mortar (PWD BSR 2022 Page No B14/157 Item No. 14.9.2) |
| 4 | Grading roof for water proofing treatment withwater proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (PWD BSR 2022 Page No B-10/107 Item No 10.17.1) |
| 5 | Making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and onecoat of neat cement, rounding edges and making and finishing the out let complete. |
| 6 | Providing and laying broken glazed tiles on roof (broken glazed tiles not less than 9kg/sqm on top of hot bitumen @ 1.7kg/sqm (1.40 kg of VG-40 (30-40) grade and 0.30 kg/sqm of vg-10 (80/100) grade) and joints filled with cement mortar 1:2 (1 cement : 2 marble dust mixed with water proofing compound all complete as per direction of engineer-in-charge (PWD BSR 2022 Page No B-10/109 Item No. 10.24) |
| 7 | Kota Stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement:4 coarse sand) for area of each slab from 901 to 2000 sqcm. (PWD BSR 2022 Page No B-11/132 Item No. 11.18.1) |
| 8 | Plaster On new surface on walls in cement sand mortaer 1:4 including racking of joints etc, complete fine finish 25mm thick (PWD BSR 2022 Page No B-12/132 Item No. 12.2.1) |
| 9 | 6mm thick cement plaster to ceilling of mix 1:3 (1 Cement:3 Fine Sand) PWD BSR 2022 Page No. B-12/139 Item No. 12.50) |
| 10 | Repair to damaged RCC Slabs, beams and columns etc for strengtheing with cement mortar 1:3 in following steps (1) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering, cleaning of concrete surface with water as necessary and getting dried. (2) Applying Epoxy primer on the exposed steel bars.(3)Applying Epoxy hardener and resin mix (as per manufactured\"s specification) on concrete and steel bars with brush. (4) Speading dry cement mortar 1:2 mix over epoxy treated wet surface and allow it to dry for one day. (5) Plastering the surface with cement sand mortar 1:3 upto depth of 30mm complete.(6) Cure the plastered surface for 15 days. All work including scaffolding etc. complete in all respect.(PWD BSR 2022 Page No. B.13/153 Code No. 13.29) |
| 11 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excaveted soil as directed with in lead of 50 mtr All Kind of soil (PWD BSR 2022 Page No B-1/44 Item No. 1.6) |
| 12 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (PWD BSR 2022 Page No B-3/54 Item No. 3.1.6) |
| 13 | P&F steel glaze doors windows and ventilator shutlers of of standard rolled steel section joints mitered and welded with steel lugs 13mm, 10 cm long embeded in cement concrate block 15X10X10 of 1:3:6 aggregate 20 mm nominal size of with wooden plugs and screws or rea plugs and serews with fixing plips or wiht bolts and nuts as required including providing and fixing of plain glas panes 4mm thick with coopper glazmg clips and special metel sash putty of approved make or metel beading with csrewa complate including riming coeat of approved steel primer excluding the cost of metel beading and other fitting excapt necessary hings of pivots steel handles peg stay etc as required Partly fixed and partly openable (fixed area not to exceed 33%) (PWD BSR 2022 Page No. B-9/101 Item No. 9.19.4) |
| 14 | Painting with synthetic enamal paint of approved brand and manufacure to give an even shade : one or more coats on old work. (B - 146, 12.46.2) |
| 15 | Providing corrugated G.I. sheet roofing roofing fixed with G.I. J or L gooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers fillde with white lead and including a coat of approved sheet primer and two coat of approved paint on over lapping of sheet complete (up to a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets. .80mm thick(PWD BSR 2022 Page No. B-9/101 Item No. 9.19.4) |
| 16 | Marble Stone Flooring Table Rubbed 16-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 Cement : 4 Coarse Sand) jointing with white cement mortar 1:2 ( 1 White Cement : 2 Marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Above 3601 Cm2 Slabs.(PWD BSR 2022 Page No. B-7/83 Item No. 7.2.3) |
| 17 | P & F Granite stone slab thickness 16-18 mm mirror polished and machine cut in counter , laid on 12 mm (Av.) thick base of cement mortar 1:3 with white cement mortar 1:2 with pigment to match the shade of the granite slab complete including rubbing and polishing of. Black granite :Above 3601 Cm² slabs (PWD BSR 2022 Page No. B-7/84 Item No. 7.5.6) |
| 18 | Brick masonary with F.P.S. bricks of class designation 75 in superstur 4.5m in cement sand mortar 1:4(1 cement:4sand) (PWD BSR 2022 Page No. B-5/65 Item No. 5.1.1) |
| 19 | Providing and fixing Ist quality MAT fifnished ceremic tiles size 300 X 300 mm confirming to IS: 13755 & IS: 15622 color such as white, grey, ivory, fume red brown in walls, floors] steps, pillor etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joints filler powder and finishing with flush pointing in white cement mixed with pigmant to match the shade of tile compate. including the cost of cement morter bed 1:4(PWD BSR 2022 Page No. B-7/86 Item No. 7.12) |
| 20 | Providing and fixing Ist quality MAT fifnished ceremic tiles size 300 X 300 mm confirming to IS: 13755 & IS: 15622 color such as white, grey, ivory, fume red brown in walls, floors] steps, pillor etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joints filler powder and finishing with flush pointing in white cement mixed with pigmant to match the shade of tile compate. including the cost of cement morter bed 1:4(PWD BSR 2022 Page No. B-7/86 Item No. 7.13) |
| 21 | R R Stone masonary for for superstructure above plinth level on storey height(PWD BSR 2022 Page No. B-6/69 Item No. 6.2.6) |
| 22 | P & F plain fiber glass sheet ( FRP sheet fiber reinforcement product dheet conforming to IS: 12866-1989 having minimum thickness as below including ficing with nuts, bolts hooks and bitument washer etc. complet: 3.0 mm thick(Wt. 5.0 Kg/mtr.sq) (PWD BSR 2022 Page No. B-10/110 Item No. 10.25) |
| 23 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or flats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide.(PWD BSR 2022 Page No. B-9/99 Item No. 9.8) |
| 24 | Providing and fixing T iron frames for doors windows and ventilators of mild steel Tee=sections, joints mitered and welded with 15X3mm lugs 10cm long embedded in cement concrete blocks 15X10X10cm of 1 :3 :6(1 cement 3coarse sand 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or raw plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screw and applying a priming coat of approved steel primer (PWD BSR 2022 Page No. B-9/98 Item No. 9.5) |
| 25 | Providing and fixing Square bars or other flat welded to window, ventilators etc.12mm. (PWD BSR 2022 Page No. B-9/102 Item No. 9.27) |
| 26 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. (PWD BSR 2022 Page No. B-9/102 Item No. 9.26) |
| 27 | Providing and Fixing Welded mash/expanded metal mesh in frame work, flat iron beading 20X3 mm including top cross laps inside and out sides welding, iron bolts, screws, clips, etc Welded Mesh 25X25 mm X 16 Gauge(PWD BSR 2022 Page No. B-9/104 Item No. 9.38.3) |
| 28 | 120 Cm. high fencing with angle iron posts 50X50X60 mm plaeed at every 3 Mtr. Apart 30 Cm. in ground embedded in cement concrete 1:3:6 (30x30x45 cm) corner and every lenth post to be strutted with 50X50X60 mm angle iron provided with three horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staple including earth work in excavation etc. complete. (PWD BSR 2022 Page No. B-9/103 Item No. 9.32) |
| 29 | Distempering with drydistemper of approved brand shade (two or more coats) and of required shade on new work, over and including priming coat of whiting to glvean even shade including all scaffolding |
| 30 | Grinding and polishing on mosaic/polished stone flooring New surface |
| 31 | Supplying and fixing in walls machine cut and polished stone shelves tands and sills in CM 1:3 with maxhine cut edges.Kota stone 25mm thick. |
| 32 | Applying birla Jk white cement based putty over cement plaster surface for making even surface |
| 33 | P & F GI pipes (Internal works) with GI fittings excluding Union (IS: 1239 mark) and MS clamps, including cutting and making good the wall and floors. 50mm dia nominal Bore B class. |
| 34 | Providing and fixing in position collapsible steel shutters with vertical M.S., Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm eith top flat of 50x10mm and bottom flat of 40x6 with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steelprimer |
| 35 | Construction of septic Tank in all types of soil with 40 cm thick masonary in CM 1:6:15 Cm thick C C bed of 1:5:10 M -15 grade C C flooring & over stone slab covering , 80 mm thick slab jointing of slab in CM 1:3 Ralthal, Kharanja, 50 mm thick stone partiSize 400 X 140 X 150 CM (50 user ) |
| 36 | 1mm thick selam stain less steal AISI 304 kitchen sink of approved make (Nirali, jaina, neelkant) with long waste coupling 18X16X16 |
| 37 | Construction of chamber in all types of soil with 300mm thick masonry in C.M. 1:6, 100mm thick cement concrete 1:5:10 in foundation 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade CC flooring, earth work etc. complete as per design including desposal of surplus earth with in a lead of 50 mtr .Inside size 450 X 450mm depth upto 0.5 M Cement cover with frame |
| 38 | P & F GI pipes (Internal works) with GI fitting excluding Union (IS 1239 mark) and MS clamps, including cutting and Exposed on wall 15 mm dia nominal bore B class |
| 39 | 25 mm dia nominal bore B class |
| 40 | P & F rigid PVC Pipe (IS: 4985 mark) class II/(4 Kg/Cm2) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm |
| 41 | 75 mm |
| 42 | P&F rigid PVC pipe fitting (IS : 4985 mark) of approved quality/makw including joining the pipe with solvent cement ruber ring and lubricant : Bend 110 mm dia |
| 43 | Bend 75 mm dia |
| 44 | Coupler (Socket) 110 mm dia |
| 45 | Coupler (Socket) 75 mm dia |
| 46 | Reducer 110x75 mm (110mm) |
| 47 | Plain tee 75 mm |
| 48 | plain tee 110 mm |
| 49 | N.T. 110 mm |
| 50 | Pipe Clip 110mm |
| 51 | Pipe Clip 75mm |
| 52 | P&F Angle Cock |
| 53 | P & F bib cock (IS 8931 mark) Superior Quality of approved make Brass bib cock 15mm nominal bore. |
| 54 | P & F Full- Way Valve (IS:778 Mark) or wheel valve of approved make: Gun metal 15 mm |
| 55 | Gun metal 25 mm |
| 56 | Half Brick masanory in foundation & plinth using brickdesignation 75 in low cost shree binder & sand mortar Cement sand Mortar 1:6 (1 cement: 6 Coarse sand) |
| 57 | P & F WVC wash basin (1st quality, I.S.: 2556 mark) of approved make with C.P. pillar cock (I.S.: 8934 mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 580 X450 mm |
| 58 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casingpipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:100 mm dia Nominal bore. |
| 59 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.100 mm Nominal bore of pipe |
| 60 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 150 mm Nominal Bore. |
| 61 | S & F tube well cover ofM.S.sheet (6mm thick) with nuts and bolts complete for casing size:100mm dia |
| 62 | Installation of India mark II hand pump set, complete on existing plate form. |
| 63 | Constructionof 185 cm. dia platform as per approved design and drawing of UNICEF. |
| 64 | Supplyingof India mark II hand pump set completemarked with cylinder and ten connecting rods etc. IS 1239 |
| 65 | Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239marked in 3m length including all accessories and fittings required for installation of hand pump. |
| 66 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 67 | Providing and Layingin positionCement concrete including curring compaction etc.in specified grade excluding the cost of centering and shuttering - All work up to plinth Level 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20mm nominal size |
| 68 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (small) size 456x355x265mm. |
| 69 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots |
| 70 | Light fixing and maintainance work (as per required) |
