|
| 1 | Excavtion for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated materials upto a distance of 50 m. beyond the building area staking and spreading as directed, dewatering, preparing the bed for the found. |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed ,dewatering ,preparing the bed for the foundation and necessary backfilling ,ramming ,watering including shoring and strutting etc .complete. (Liftupto1.50 m) By Mechanical Means |
| 3 | Providing soling using 80 to 100 mm size trap metal in 15 cm layer including filling voids with sand, ramming, watering etc. complete.As directed by Engg. Incharge |
| 4 | Providing and laying in situ cement concrete in 1:3:6 of trap/ gneiss metal for foundation and bedding including belling out water, form work, compacting, finishing if required and curing etc.complete. |
| 5 | Providing and casting in situ cementconcrete M-20 of trap/granite/quartzite/ gneiss metal to R.C.C. worklike roft grillage, strip,foundation and footing of R.C.C. columns and steel sanctions including belling out water manually, centering formwork, compa |
| 6 | Providing and laying in situ cementconcrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed drawings, or as directedincluding centering formwork, compaction and finishing the formed surface if special finish is to be provided & Curing etc. complete.(SSR 2022-23, SR IT No. 846) |
| 7 | Providing and casting in situ cementconcrete M-20 of trap /granite/quartzite/ gneiss metal for R.C.C. beams and lintel as per detailed drawings, or as directedincluding centering formwork, compaction and finishing the formed surfaces etc. complete. (SSR2022-23, SR IT No. 851) |
| 8 | Providing and casting in situ cementconcrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. slab and landing as per detailed drawings, or as directedincluding centering formwork, compaction and finishing the formed surfaces with cm 1:3 of sufficient minimum thickness & curing etc. complete. (SSR 2022-23, SR IT No. 856) |
| 9 | Providing and laying Cast in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, coverblocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel ).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Typemixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).(S.No. Bd.F.9 Page No. 303 and B.7, Page No.38) |
| 11 | Providing and fixing in position H.Y.S.D bar reinforcement ofvarious diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking |
| 12 | Filing in plinth and floors with approved excavated materials in 15 cm to 20 cm layers includingwatering and compaction etc. complete. |
| 13 | Filling in plinth and floors with contractor smaterial /brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 14 | Providing fly ash brick masonry with conventional /I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints ,racking out joints watering and scaffolding etc. complete. |
| 15 | Providing fly ash brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in super structure including striking joints ,raking out joints,watering and scaffolding etc. Complete |
| 16 | ProvidingandfixingM40gradethickvibratedpullcastorsimilartypeconcreteframewithchamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/candfixing inwall with 6 Nos of hold fast of 12 mmdia bars 500 mmlong includingprimerandoilpaintingetc,complete) frame size 60 mm x 100 mm . |
| 17 | Solid Core Flush door Double leafProviding and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exteriorgrade as per detailed drawings approved face veneers 3 mm thick on both faces or asdirected ,all necessary beads ,mouldings and lipping ,wrough tiron hold fasts ,chromiumplated fixtures and fastenings ,with brass mortise lock ,chromiumplated handles on both sides, and finishing with French Polish etc. complete |
| 18 | Providing and fixing collapsible steel gate in one / two leaves with hotrolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x12 mm with roller wheels confirming to grade F.G. 150 fitted withsnap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces,handles, locking arrangement and one coat of red lead primer and oilpainting etc. complete. (I.S. 105211983). |
| 19 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. |
| 20 | Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sqm as per drawing including fixtures necessary welding drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 21 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. |
| 22 | Providing internal cement plaster 12 mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. |
| 23 | Providing internal cement plaster 20 mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 24 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick andrequiredwidthinplain/diamondpatternonbedof1:6C.M.including cementfloat, filling joints with neat cement slurry, curing, polishing and cleaningetc. complete. Bd.M.3 Page Number 380 |
| 25 | Providing and laying vitrified mirror /glossy finish tiles having size 590mm to 605mm x 590 mm to 605 mm of 8to10 mm thickness and confirming to IS.15622-2006 (groupBla) of approved make, shade and pattern for dado and skirting in required position fixed in1:4cement mortar in cluding neat cement float, filling joints ,curing and clearing etc.complete |
| 26 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. |
| 27 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing /moulding the sharp edges wherever necessary, curing, etc. complete. |
| 28 | Providing and laying antiskid ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white / colour cement slurry cleaning curing etc. complete. |
| 29 | Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete. |
| 30 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 31 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 32 | Providing and applying two coats of flat oil paint of approved colour and shade to internal /external plastered surfaces including scaffolding if necessary ,cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 33 | Providing patti/ band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. .As directed by Engineer in charge. |
| 34 | Providing and applying two coats of exterior acraylic emulsion paint confirming to coresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 35 | Providing and fixing 40 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures,errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 36 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 37 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) |
| 38 | BALA Painting work for School |
| 39 | Electric fitting to Class room with necessary wiring with 1.5 sqmm under ground fitting for 6 Fan, 5 Tube light, 6 Socket 6 amp, 2 socket 16 amp Havelles 36\"\" Fan of 4 nos and 4 CFL Tubelight of 22 watt |
| 40 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, andlabour etc complete. Spec. No. As directed by Engineer in Charge |
