Tender For Community building construction work on Bhil Mangri Salus Road (Municipal Council Rajsamand) - Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soli as directed within a load of 50 Mtr(a) All kind of soil. 2 Carriage ofMaterials by mechanical transport including loading, unloading and stacking ::Earth 2 km 3 Providing and laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth, excluding the cost of shuttering, using. 1 cement: 4 sand: 8 aggregate mix. 4 Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:1:6 5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete work inbeams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement:M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) 8 Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of form work for foundations in basements rafts, footings, strap beams, bases of columns etc up to plinth level. 9 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts. 10 Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of form work for suspended floor,roofs etc. 11 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Hot rolled deformed bars 12 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand 13 Half Brick masonry in super str. Up to third storey above plinth level with bricks of class desig. 75 in cement mortar 1:6 (1cement: 6 coarse sand) 14 Providing and laying brick tiles of class designation 100 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat :With F.P.S. brick tiles 15 Plaster on new surface on walls in cement mortar 1: 4including racking of joints etc. complete fine finish. (a) 20mm. Thick 16 Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete 17 Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) or slab in wal, steps, pillars, counters, jambs, shelves, sills etc laid over 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand), jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajnagar 1st quality/Ageria with light spots.Above 3601 Cm2 Slabs 18 Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 19 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 20 Painting with enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 21 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 23 Providing and Fixing brass bib cock of 15 mm nominal bore. 24 Providing and fixing gun metal gate valve 25 mm nominal bore. 25 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank 26 Providing and fixing PTMT, push cock of approved quality andcolour.15 mm nominal bore, 98mm long. Weighing not less than 75 gms 27 Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 28 Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 29 Providing and fixing PTMT Ball cock of approved quality, colour andmake complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 30 Providing and fixing gun metal non- return valve of approvedquality (screwed end) :A - (do) 32mm 31 B- (do) 25 mm 32 Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes ofClass III (6 Kg/sqcm) suitable for potable water with rubber ringjoints (as per IS 4985-2000) of following outer dia with all accessories (excluding specials) complete including all material,labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately. 90 mm 33 110 mm 34 Providing and fixing on wall face Unplasticised - PVC mouldedfittings/ accessories for Unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm 35 Providing and fixing Unplasticised -PVC pipe clips of approveddesign to Unplasticised - PVC rain water pipes by means of50x50x50mm hard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work and fixing in cementmortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm dia 37 20 mm dia
