Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | 1.Providing double scaffolding arrangement in the Officer\"s quarters buildingsin south division area to carry out repair/improvement works by using steel pipes of required diameter or by Casuarina poles, including providing necessary Horizontal and verticalmembers, tie members, bracings etc., all round and platforms at various level adquate strength including removing the scaffolding with platform after completion of repair/improvement works all as per relevant specification and all as directed at site including all labour, materials, tools, equipments, coir, transport, fuel, etc., complete.Note:1) Scaffolding will be measured only one time for entire repair/improvements (length x height)2) 75% of the payment may be released after erecting of scaffolding in all respects. 3) 25% of the balance payment will be released only after completion of repair/improvement works and removal of scaffolding.4) If casuarina poles used for scaffolding, the bottom and top dia of casuarina poles are of 100mm and 50mm respectively. |
| 2 | 2.Cutting and clearing of the weeds, shrubs, bushes and other un wanted vegetation and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area from Officers\" quarters area near napier bridge wherever required by using weed cutting machine or anywhere as directed at site including hire charges & maintenance cost for weed cutting machine, labour charges for operator, conveying the machineries inside the port premises including all labour, tools, equipments, transportation, fuel and cutting wire for weed cutting machine etc., compelte. |
| 3 | 3a.Cutting and removing the Fallen/Dead/unwanted trees girth beyond 30cm girth upto and including 60cm girth from the officers quarters wherever required in southern division area including stacking the cut trees near by area for transportation including cutting machine, all labour, materials, tools, equipments, fuel, etc., complete. |
| 4 | 3b.Cutting and removing the Fallen trees/Dead trees/unwanted trees girth beyond 60cm girth upto and including 120cm girth from the officers quarters wherever required in southern division area including stacking the cut trees near by area for transportation including cutting machine, all labour, materials, tools, equipments, fuel, etc., complete. |
| 5 | 4.Dismantling and removing the existing damaged floor plastering/floor tiles/mosaic/cuddappah stone in Cement Mortar to the required thick wherever necessary without damaging the structures, including collecting, bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work, including all labour, tools, equipments, transport, fuel, etc., complete. |
| 6 | 5.Dismantlingand removing theexistingdamaged wall tiled dadoing in bath room portion and wherever required for providing glazed tile dadoingwithout damaging the structures nearby, including collecting, bringing down and stacking the debris to the ground floor level within a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments,etc. complete. |
| 7 | 6a.Dismantling and removing the existing wornout wooden doors and windows/PVC Doors, aluminium windows, ventilators of area less than 3M2 including main frame, in all floors by cutting the masonry/concrete wherever required in officers quarters area without damaging thestructures nearby, transporting and handing over to the departmental stores/RSO yardwithin a lead of 3kms all asdirected including all labour, tools equipments, transport, fuel, etc., complete. |
| 8 | 6b.Dismantling and removing the existing wornout wooden doors and windows/PVC Doors, aluminium windows, ventilators of area more than 3M2 including main frame, in all floors by cutting the masonry/concrete wherever required in officers quarters area without damaging thestructures nearby, transporting and handing over to the departmental stores/RSO yardwithin a lead of 3kms all asdirected including all labour, tools equipments, transport, fuel, etc., complete. |
| 9 | 7.Dismantling and removing the existing damaged pressed tiles with cement mortar required thickness in the terrace and wherever required without damaging the nearby structures including collecting, bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as specified andas directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 10 | 8.Dismantlingand removing the existing damaged Gypsum board false ceiling with out frames, etc., wherever required to cut the existing false ceiling to the required size to suit the site condition without damaging the adjoining structures, loading and transportingthe materials within a lead of 2km and depositing the rubbish at ground levelall as per specification and as directedat site of work including all labour, tools, equipments, etc., complete. |
| 11 | 9.Dismantling and removing the damaged PVC/G.I. waste water line/drainage lines (20mm to 110mm) as existing at site with all fixtures/fittings without any damages, collecting and handing over the serviceable materials to the departmental stores/RSO yard within a lead of 3km and depositing the rubbish within a lead of 50m, all as directed including all labour, tools, equipment, scaffolding, transport, fuel, etc., complete. |
| 12 | 10.Removing European type water closet/Indian water closet with trap and all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and bringing the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 13 | 11.Removing the existing damaged wash hand basin with all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and bringing the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 14 | 12.Dismantling/cuttingthe existing RCC members including stacking the steel without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and wherever requiredincluding collecting and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified andas directed at site of work including all labour, tools, equipments, transport, fuel etc., complete.. |
| 15 | 13.Dismantling and removing the existing damaged Plain cement concrete in Rich mix to the required level, size and shape in road portion and wherever required without damaging the nearby structures if any, including collecting and depositing the debris within a lead of 50m for disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. |
| 16 | 14.Dismantling and removing the existing damaged Plain cement concrete in lean mix to the required level, size and shape in road portion and wherever required without damaging the nearby structures if any, including collecting and depositing the debris within a lead of 50m for disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. |
| 17 | 15.Dismantling the existing brick work with cement mortar to the required height with out damaging the structures nearby and collecting, stacking the debris within a lead of 50m for disposal all as directed at site of work including costs of all labour, scaffolding, tools, equipments, etc., complete. |
| 18 | 16.Dismantling and removing the existing wornout MS grill, MS gates, window grill, ventilators grill etc without damaging the structures nearby, including transporting and handing over the same to departmental stores/RSO yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 19 | 17.Dismantling and removing the existing brick jelly lime/cement concrete to the required level, size and shape in sunken portion and wherever required without damaging the nearby structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. |
| 20 | 18.Removing the existing damaged taps, wall mixer, shower arm with shower rose, health facuet, angle cock etc., with all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 21 | 19.Dismantling and removing the existing damaged AC sheet/Galvalume roofing sheet with all accessories without disturbing near by structure, conveying and handing over the serviceable materials, if any, to the department stores, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 22 | 20.Providing and fixing suspended Gypsum board false ceiling (at required height from the existing floor level) including providing and fixing Galvanised steel grid frame consists of G.I.perimeter channels of 0.50mm thick 27mm high having flanges of 20mm and 26mm long along the perimeter of ceiling, fixed to brick wall/partition with the help of nylon sleeves and screws/rawl plugs at 450mm centre to centre suspending G.I. intermediate channels of size 45x15x0.90mm thick running at required intervals as directed ceiling angle hanger of 25x10x0.55mm thick of required length fixed with 6mm dia bolts to the soffit cleat of size 25x25x1.6mm fixed to ceiling with 12.5mm dia 40mm long dash fasteners and 6mm dia 35mm long metal screws to which the ceiling section of size 80x26x0.50mm with tapered flanges having lips of 0.5mm at required intervals as directed fixed to the intermediate channel in a direction perpendicular to the intermediatechannel with connecting clips made out of G.I. wire at every junction, supplying and fixing 12.5mm thick plain gypsumboard with tapered edges (Conforming to IS-2095) to the ceiling section and perimeter channels with 25mm long drive all screws at 230mm intervals including jointing and fixing the boards to have a flush look by filling and finishing the tapered and square edges of the gypsum boards with recommended filler, paper tapes, finisher and one coat of primer suitable for gypsum board all as per manufacturer\"s specifications all as directed, including all materials, labour, tools, equipments, scaffolding etc., complete.Note: Suitable arrangements shall be made in the false ceiling to accommodate light, fan and other fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed etc., as directed and the rate quoted shall be inclusive of the above arrangements. |
| 23 | 21.Providing and fixing plaster of paris cornice (POP- Gypsum anhydrous) plain type of 100mm wide at the junctions of false ceiling and wall/beam including finishing the exposed surfaces with one coat of primer all as directedat site of work including all material, scaffolding, labour, tools, equipments etc., complete. |
| 24 | 22.Earthwork excavation upto 1.5m depth by manually/mechanically in ordinary soil, sand, clay, mixed with roots, boulders, weighing individually less than 250 kg. debris, rubbish etc., as existing at site of work for all foundation and where ever required andas directed at site including dressing of sides, ramming of bottom etc., dewatering if any as specified under relevant specifications, depositing the excavated earth within a lead of 50m all asper direction of Engineer-in-charge including shoring, shuttering, labour, tools, tackles, equipments, fuel, etc., complete. |
| 25 | 23.Re-filling with available excavated earth (excluding rock) after laying the Sewage PVC pipe and wherever required in layers not exceeding 200mm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m all asper direction of Engineer-in-charge and including all labour, tools,equipments, etc., complete. |
| 26 | 24.Providing and laying of PCC 1:4:8 (1 cement : 4 crushed stone sand : 8 hard granite graded stone aggregate 40mm down graded to 20mm size)in volumetric proportionsfor levelling course in car parking area and wherever required including shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., including necessary excavation, levelling, dressing & finishing the top smooth all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments,etc., complete. |
| 27 | 25.Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 28 | 26.Providing Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in CM 1:4 (1 cement : 4 crushed stone sand) in footh path, kitchen platform, partition in ground level upto fifth floor level and wherever requiredallas directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 29 | 27.Providing Brick pillaster using bricks of class designation 7.5 in CM 1:4 (1 cement : 4 Crushed stone sand) for raising walls in ground level upto fifth floor level and wherever required, including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 30 | 28.Providing, casting and fixing in position of RCC precast cover slabs of various thickness more than 40mm thick incement concrete of mix 1:1.5:3 involumetric proportions (1 cement : 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) inculding finishing the exposed surface, in cement mortor 1:3 (1cement 3 crused stone sand) 6 to 10mm thick with a floting coat of neat cement punning all as per relevant specification and as directed at siteincluding mixing, transporting, placing, ramming, consolidating, etc. including scafolding,shuttering, vibrating including cement, all labour, materials, curing, equipment, tools, etc. complete.Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 31 | 29.Providing and layingPlain Cement Concrete of mix 1:1.5:3 (1 cement :1.5 crushed stone sand :3 hardgranitegraded stone aggregate of 20mm nominal size) in volumetric proportionsfor road concreting (Patch work) and other such works wherever required consolidated including necessary excavation, levelling & dressing & finishing the top smooth includingmixing,transporting, placing, curing all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments, fuel, etc., complete. |
| 32 | 30.Providing and laying of PCC 1:2:4 (1 cement :2 crushed stone sand :4 hard granite graded stone aggregate 40mm nominal size)in volumetric proportionsfor road concreting (Patch work) and other such works wherever required consolidated including necessary excavation, levelling & dressing & finishing the top smooth includingmixing,transporting, placing, curing all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments, fuel, etc., complete. |
| 33 | 31.Supplying, fabricating and placing in positionThermo-Mechanically Treated bars of grade Fe-500D (TMT steel bars) or more as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification and as directed,including steel, all materials, labour, tools, equipment, transport, fuel, etc., complete.Note:The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., Binding wire will not be measured for payment purpose. |
| 34 | 32.Supplying, fabricating and fixing the M.S gate, window/Ventilator grill, Ladder as per existing or as directed at site using suitable MS Square bars, MS Square sections, MS Flats, M.S.sheet, etc., using as verticles, horizontals and diagonal members, including fixing the Gate in the existing pintels to the pillars including cutting the flats, bars, etc., to the reqired length, welding the joints all as directed at site of work and providing suitable fittings, such as MS tower bolts, aldrop bolts by welding including necessary MS ornamental fittings, providing scaffolding, fixing gate in proper alignment and making necessary pocket (dismantling the existing brick work) arrangements including fixing the Grill to the pocketwithPCC 1:2:4(1 cement: 2 crushed stone sand : 4 stone graded aggregate of 20mm graded down to 12mm size) in volumetric proportions etc.,all as directed at site of work including scaffolding, fixing grill in proper alignment, including cement, alll materials, labour, tools, transport, fuel, etc., completeNote:1) The payment is based on the total weight of theMS flats, bars, etc as fabricated.2) The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 35 | 33a.Preparing the surfaces of floor and plastering in cement mortar 1:3 (1 cement :3 crushed stone sand), 20mm thick, includingall as per relevant specifications, all as directed at site of work including mixing, transporting, placing, finishing, curing, all other materials, labour, tools, equipments, etc., complete to the required finish all as directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete. |
| 36 | 33b.Preparing the surfaces of floor and plastering in cement mortar 1:3 (1 cement :3 crushed stone sand), 20mm thick with water proofing compound liquid (admixture of Conplast x 421 IC of FOSROC CHEMICALS or equivalent)as per manufacturer specificationincludingall as per relevant specifications, all as directed at site of work including mixing, transporting, placing, finishing, curing, all other materials, labour, tools, equipments, etc., completeto the required finish all as directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete. |
| 37 | 34.Preparing the surfaces of wall and plastering in Cement Mortar 1:5 (1cement : 5 crushed stone sand) 12mm thick wherever required to the required finish, curing etc., all as directed at site including cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 38 | 35.Preparing the surfaces of ceiling etc., and plastering in cement mortar 1:3 (1cement : 3 crushed stone sand)6 to 10mm thick to the required finish, curing etc., all as directed at siteincluding cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 39 | 36.Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands)(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4 (1 Cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3kg/sq.m including pointing the joints with white cement and matching pigments including pointing the joints with white cement and matching pigments etc., complete., and as directed at site, including all materials, labour, tools, equipments, etc., complete. |
| 40 | 37.Providing and laying Ceramic glazed wall dadoing/skirting (15cm height) tiles (Plain) of size 300X450mm or nearest size as available in the market with good quality ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, in a bedding mortar of 12mm thick in C.M 1:3 (1 cement : 3 crushed stone sand) and fixing with neat cement slurry and joints neatly pointed withwhite cement added with pigment to match the colour of the tiles to a required height as directed at siteincluding cement and all other materials, labour, tools, equipments, scaffolding, etc complete. |
| 41 | 38.Providing and laying Vitrified tile for flooring conforming to IS :15622 (thickness to be specified by the manufacturer) with good quality (Jhonson/ Kajaria/Nitco or other approved brands) (Double charge or equivalent) of size 600mmx600mm or of nearest approved size andcolour match with existing and water absorption less than 0.08%, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade complete., including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 42 | 39.Providing and laying of pre polished Granite stone slab for kitchen platform of colour black, Cherry/Ruby red 18mm thickness of approved colour and pattern of required size including nosing the edges of slab to the required finish for cupboard slabs and wherever required set in cement mortar 1:4 (1cement : 4 crushed stone sand) 20mm thick fixed with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the Granite slab, curing, all as per relevant specification and as directed at site of work including all materials, cement, labour, tools, equipments, transport, fuel, etc. complete. |
| 43 | 40.Providing and laying one side pre polished granite slabs edge moulding to 18mm thick Granite stone including machine polishing to edge to give high gloss finish of all colour black, Cherry/Ruby red 18mm thick or nearest size available in the local market and fixing in the granite stone counters, Vanitiesincluding nosing on one edge, curing, polishing etc., all as directed including all other materials, labour, equipments, scaffolding, etc, complete |
| 44 | 41.Dismantling existing brick work for providng exhaust fan hole at kitchen, bath room and wherever required including fixing 8 inches pvc pipe pointing with cm 1:3 including curing, all as directed including cement, all other materials, labour, equipments, scaffolding, etc, complete. |
| 45 | 42.Providing and fixing in position First Class country wood PADAUK wrought main frames of finished size 95x70mm for doors with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 graded down stone aggregate of 20mm down size) in volumetric proportions, curing and applying two coats of oil type wood preservative of approved brand and manufacture, complete abutting against masonry/concrete as per direction of Engineer-in-chargeincluding all labour, materials, tools, equipments, etc., complete. |
| 46 | 43.Providing and fixing Second class teak wood, 30mm thick panelled shutters for doors/windows and fixing with butt hinges of required size with necessary screws, including panelling 16mm tk with single/double leaves all complete adopting Port Authority\"s manual anddirection of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. Note:Necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant item of this schedule. |
| 47 | 44.Providing and fixing in position First Class country wood PADAUK wrought main frames of finished size 65x32mm for cup board frames with necessary coach screws fixed suitably to the masonry/concrete including wooden plug including applying two coats of oil type wood preservative of approved brand and manufacture, complete abutting against masonry/concrete as per direction of Engineer-in-chargeincluding all labour, materials, tools, equipments, etc., complete. |
| 48 | 45.Supplying and fixing in position 5.5mm thick plain glass (Saint Gobain or Modiguard) for windows and doors with all accessories like anodized aluminium snap on, beading, rubber beading, country wood beadings, etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. Note:1. The actual area of glass used alone will be measured for payment purpose.2. The rate shall include the cost of rubber beading, country wood beading etc., |
| 49 | 46.Removing the existing wooden window shutter frame (Not closing properly) including MS grill, altering the shutters to suit the existing mainframe and refixing the same including replacing the hinges, tower bolts, pinheaded glass (if necessary) etc., including all labour, tools, equipments, etc., complete.Note:Hinges, tower bolts, pinheaded glass/frosted glass/plain glasswill be measured and paid separate item. |
| 50 | 47.Providing and fixing good quality 30mm thick or nearest size single leaf factory made PVC rigid foam panelled door shutters (Manufactured by M/s Rajshree or Qute or equivalent) of approved section to suit the existing dooropenings and as directed at sitewith main frame, shutter frame and panels made out of extruded 5mm thick rigid PVC foam sheet mitered at corners and fixing the door main frame on the masonry wall surfaces with 100mm long screws, with PVC fasteners all as per manufacturer\"s specification and as directed at site, including all materials, labour, scaffolding, transport, fuel, tools, equipments, etc., complete.Note: 1. The door shall be manufactured to suit the size of the existing opening available at site.2. Supplying and fixing necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant items of this schedule. |
| 51 | 48.Supplying fabricating and fixing anodized aluminium main frames for Windows/ventilator/partition using anodized aluminium sections of size including supplying and fixing necessary accessories like anodized sluminium cleats angle fully threaded 75mmmetal screws, wooden plugs ,etc., cutting the masonry/concrete etc., wherever required, fixing the frames using suitable clamps making good the disturbed portions all as per relevant specifications and as directed including all labour, tools, materials, equipments etc., complete. |
| 52 | 49.Supplying fabricating and fixing anodized aluminium Windows/door shutter frame using anodized aluminium sections of size including supplying and fixing necessary accessories like anodized aluminium cleats angle fully threaded 75mmmetal screws, wooden plugs, etc., cutting the masonry/concrete etc., wherever required, fixing the frames using suitable clamps making good the disturbed portions all as per relevant specifications and as directed including all labour, tools, materials, equipments etc., complete. |
| 53 | 50.Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 54 | 51.Supplying and fixing in position 5mm thick plain/pin headed/frosted glass (Saint Gobain or Modiguard) sliding for wooden window/Aluminium window/ventilatorwith all accessories like anodized aluminium snap on, beading, rubber beading, country wood beadings, etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. Note:1. The actual area of glass used alone will be measured for payment purpose.2. The rate shall include the cost of rubber beading, country wood beading etc., |
| 55 | 52.Replacing the existing damaged glass and Supplying and fixing in position 5.5mm thick plain glass/pin headed glass/frosted glass (saint Gobain or Modiguard or equivalent) for door/window with necessary accessories like wooden beading/ Rubber beading, screw etc., all as directed at site including removing the old damaged glass, all materials, labour, tools, equipments, transport, fuel, etc., complete. Note: The actual area of glass used will be measured for payment purpose. |
| 56 | 53.Providing and laying Brick jelly cement concrete 1:5:10 (1cement :5 Crushed stone sand: 10 Brick bat of 40mm down graded to 20mm size) in volumetric proportion for levelling course in car parking area and wherever reqired including shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., all as directed at site of work including cement, all materials, labour, tools, equipments, transport, fuel, etc., complete. |
| 57 | 54.Providing and fixinggood quality European Water Closet white/colour(Parryware or Hindware) with necessary \"P\" or \"S\" trap of approved make and qualityfixed in brick jelly cementconcretein volumetric proportion, curing and making good the disturbedportions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, plastic seat and cover fixing TW plugs etc., in sound working condition as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 58 | 55.Providing and fixing Indian type Water Closet (Orissa pattern) (Parryware or Hindware) glazed white vitreousof size 580mm x 440mm (overall) or nearest size as available in the market with necessary \"P\" or \"S\" trap of approved make and qualityfixed in brick jelly cementconcretein volumetric proportion, curing and making good the disturbedportions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, fixing TW plugs etc., in sound working conditionwith all fittings and fixtures, etc., all in sound working condition, as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 59 | 56.Providing and fixing good quality vitreous size 550x400mm hand wash basin (White) as available in the market (Kings mere basin of Parryware or Hindware)with a single 15mm c.p. brass pillar tap, c.p. waste fitting, 32mm dia c.p. brass union, 15mm dia PVC inlet connection, 32mm dia PVC waste pipe fittings, a pair of cast iron bracketssuitable for fixing the wash hand basin as available in the market, including painting the brackets, etc. with two coats of synthetic enamel paint over one coat of primer, fixing the brackets with teakwood plug and making good the disturbed portion, etc., all as directed in sound working condition including cement and other materials, labour, tools, equipments etc. complete. |
| 60 | 57.Providing and fixing 110mm dia PVC Nahani trap (floor trap with grattings) suitable for PVC waste water pipe) embedding the trap making the joints water tight etc., allas directed including allmaterials, labour, tools, equipments etc., complete. |
| 61 | 58.Construction masonry chamber and providing pvc gully trap wherever required and as dirrected by dept including labor, tools, equipments, materilas etc., complete. |
| 62 | 59.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, including all labour, materials, tools, equipments, scaffolding etc., all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., including punching the masonry/concrete wherever required.a.32mm dia |
| 63 | 59b. 25mm dia |
| 64 | 59c. 20mm dia |
| 65 | 60.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for Concealed work all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and T.W plugs/clamps, including punching the masonry/concrete wherever required including all labour, materials, tools, equipments, scaffolding etc., complete. |
| 66 | 61.Providing, fixing and laying in position rigid unplasticised PVC pipes for waste water and sewage line on the floors (Finolex or Truebore or Varun or equivalent) capable of withstanding a pressure of 6Kgf/Sq.cm including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives,making the joints water tight and connections to floor traps, gully traps, manhole etc., all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete. a. 50mm dia |
| 67 | 61b. 75mm dia |
| 68 | 61c. 110mm dia |
| 69 | 62.Supplying and fixing sanitary/C.P bath fittings with First quality (Metro or equivalent)in toilets in sound working condition including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete.a. 600mm long towel rail |
| 70 | 62b. Health Faucet |
| 71 | 62c. Pillar cock 15mm dia |
| 72 | 62d. Short body tap 15mm dia |
| 73 | 62e. Stop cock 15mm dia (concealed) |
| 74 | 62f. Angle valve 15mm dia |
| 75 | 62g. Long body bib cock 15mm dia |
| 76 | 62h. CP brass extension nipple (size 15x50mm) |
| 77 | 62i. Shower arm with flange 12\" length |
| 78 | 62j. Shower rose |
| 79 | 62k. 15mm dia single lever telephonic wall mixer |
| 80 | 62l. 32mm size Bottle Trap |
| 81 | 62m. PVC connection for wash basin and flush tank |
| 82 | 62n. PVC connection for Hot water line |
| 83 | 62o. Kitchen sink cock |
| 84 | 62p. 100mm SS grating |
| 85 | 63.Providing and fixing on wall face PVCbevelled edge mirror of good quality glass of size 600x450mm with plywood back of approved quality all as directed at site of work all labour, materials, tools, equipments etc., complete. |
| 86 | 64.Supplying and fixing sanitary fittings (Paryware or equivalent) to the existing EWC/IWC/Wash basin/Kitchen sink as available in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete.a.New flushing tank (White) |
| 87 | 64b. New flushing tank (Colour) |
| 88 | 64c. EWC seat cover (White) |
| 89 | 64d. EWC seat cover (colour) |
| 90 | 64e. 40mm dia PVC waste pipe (flexible/rigid) for kitchen sink/wash basin |
| 91 | 65.Providing and fixing aluminium fittings for doors, cup-boards, window etc., ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws allas directed including allmaterials, labour, tools, screws, equipments etc., complete. a.Tower bolt (barrel type) 200x10mm |
| 92 | 65b. Tower bolt (barrel type) 100x10mm |
| 93 | 65c. Tower bolt (barrel type) 75x10mm |
| 94 | 65d. Hooks and eyes 250mm |
| 95 | 65e. Handles 100mm long with plate 150x32mm |
| 96 | 65f. Butt hinges 125mm long |
| 97 | 65g. Butt hinges 100mm long |
| 98 | 66.Providing and fixing of heavy duty brass fittings for doors, cup-boards, window etc., with necessary screws, etc as directed at site of work including all materials, labour, tools, equipments, etc. complete. a. Door stopper with rubber bush (heavy) with CP brass screw |
| 99 | 66b. Brass 100mm mortice latch and lock with 6 levers with a pair of lever handles |
| 100 | 66c. Godrej Ultra XL+Vertibolt door lock 2c (texture brown) of size 12.6cmx7.4cmx4.3cm with necessary screws |
| 101 | 66d. Aldrop 230mm antique finish |
| 102 | 66e. Godrej cylinderical night latch and lock without pair of handles |
| 103 | 66f. Butt hinges 125mmlong |
| 104 | 66g. Butt hinges 100mm long |
| 105 | 66h. Tower bolt 150mm long |
| 106 | 66i. Handles 125mm with plate 175x32mm |
| 107 | 66j. Chromium plated Brass curtain rod 25mm dia 1.25mm thick |
| 108 | 67.Providing and fixing of heavy duty Stainless steel fittings for doors etc., with necessary screws, etc as directed at site of work including all materials, labour, tools, equipments, etc. complete. a.Butt hinges 125mm |
| 109 | 67b. Butt hinges 100mm |
| 110 | 67c. Tower bolt 150mm |
| 111 | 67d. Tower bolt 75mm |
| 112 | 67e. Aldrop 250mm |
| 113 | 67f. Stainless steel handle125mm long |
| 114 | 67g. Stainless steel handle 100mm long |
| 115 | 67h. Magnetic catcher in cupboard/ward robe shutters |
| 116 | 67i. Hooks & Eyes 150mm long |
| 117 | 67j. Hooks & Eyes 50mm long |
| 118 | 68.Providing and applying white cement based putty of average thickness 1mm to give an even shade all as directed at site of work and wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 119 | 69.Scrapping and removing the existing white/colour wash and preparing thewall/ceiling internal/external surfaces including applying putty to seal the cracks in the wall wherever required all as directed at site of work including all labour, scaffolding, materials, tools, equipments, wirebrushes, etc. complete. |
| 120 | 70.Preparing the surfaces of ceiling and applying one coat of premium plastic acrylic emulsion paint (asian orequivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 121 | 71.Preparing the surfaces of internal walls and applying one or more coats of acrylic distemper primer (asian or equivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 122 | 72.Preparing the surfaces of internal walls and applying two coats ofacrylic emulsion paint (asian orequivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 123 | 73.Preparing the surfaces of outer walls and applying two coats of premium acrylic emulsion paint (asian orequivalent) and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint over one coat of exterior primer for old/new wall surfaces to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 124 | 74.Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint colour (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 125 | 75.Preparing the surfaces of new wooden members and painting with two coats of synthetic enamel paint colour (asian orequivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 126 | 76.Preparing the surfaces of old steel members and painting with two coats of synthetic enamel paint (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 127 | 77.Preparing the surfaces of new steel members and painting with two coats of Deluxe Multi Surface Paint over a coat of primer (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 128 | 78.Preparing the surfaces of kerb walls/speed breaker and painting with two coats of synthetic enamel paint (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, brushes, tools, equipments, etc., complete. |
| 129 | 79.Preparing the wooden surfaces and varnishing with two coats superior quality varnish over a coat of flatting varnish to give a neat and elegant appearance all as directed at site of work including all materials, labour, scaffoldings, tools, brushes, equipments, etc. complete.Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 130 | 80.Polishing the existing mossaic tiled flooring/skirting in Officers quarters at Napier bridge by thoroughly scrubbing and stripping using TASKI stripper R-20 solution or similar chemical with scrubbing pad, until old wax, grease and muddy layers on the floors are stripped off completely and the floor is rinsed thoroughly with water by TASKI ergo disc machine and soft pad, including sucking the soiled solution with TASKI vacumat, allowing the floor to dry completely and applying two coats of TASKIPlaza Plusor similar chemical evenly with an applicator tool onto the floor and applying two coats of undiluted TASKI Completeor similar chemical evenly with an applicator tool and finishing the joints neat, all as directed at site of work includingall labour, materials, tools, equipments, chemicals, transport, fuel, etc., complete.a. Providing mosaic floor polishing with wax finishing from Ground floor upto 5th floor level |
| 131 | 80b. Providing mosaic Skirting polishing with wax finishing from Ground floor upto 5th floor level |
| 132 | 81.Supplying and fixing of good quality insects preventing PVC netlon mesh consisting of 1.8x1.8mm apexture for size (Approx) to the window openings andventilators etc., and wherever required after removing the old damaged mesh including providing 25mm wide hook fasteners nailed stabled continuously on all the four sides of the existing wooden frames and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, etc., complete. a.PVC Netlon mesh without country wood reepers |
| 133 | b.PVC Netlon mesh with country wood reepers |
| 134 | 82a.Supplying and fixing good quality insects preventing aluminiummeshgrade 304 as 18x16x0.24 dia to main frame of the doors etc. wherever required after removing the old damaged mesh including providing powder coated aluminium profile size 43/8x17.4x1.00mm (Vertical and Horizontal as required numbers) on all thesides of the existing wooden frames with necessary requred fittings of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments etc., complete. |
| 135 | 82b.Supplying and fixing good quality insects preventing aluminium meshgrade 304 as 18x16x0.24 dia to main frame of the windows, ventilators etc. wherever required after removing the old damaged mesh including providing powder coated aluminium frame size 19.4 x10.00x1.00mm (Vertical and Horizontal as required numbers) on all thesides of the existing wooden frames with necessary requred fittings of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments etc., complete.Note:Supplying and fixing of wooden beading will be measured and paid separately under the relevant item. |
| 136 | 82c.Supplying and fixing good quality insects preventing aluminiummeshgrade 304 with fittings for existing doors/window/Ventilator etc. wherever required after removing the old damaged aluminium mesh including on all thesides of the existing wooden frames with necessary requred fittings of the screen all of approved quality and as directed at site of work including all labours, rolling, materials, fabrication, tools, equipments etc., complete. Note:Supplying and fixing of wooden beading will be measured and paid separately under the relevant item. |
| 137 | 83.Providing and fixing first quality stainless steel Kitchen sink with drain board 510x1040mm bowl depth 250mm and fittings (NERALI OR MOTI MAKE) in kitchen in sound working condition including testing etc., all as directed including all labour, materials, tools, etc, complete. |
| 138 | 84.Supplying and fixing of Aluminium diamond mesh for outside window/ventilators and service verandah grill openings including supplying and fixing good quality country wood reapers kongu or equivalent of size 50x20mm around all the existing Aluminium glazed windows/ventilators and service verendah grill openings with GI binding wire/nailed at every 150mm intervals all of approved qualityand as directed at site of work including all labours, materials, fabrication, tools, equipments etc., complete.Note:Supplying and fixing of wooden beading will be measured and paid separately under the relevant item. |
| 139 | 85.Supply of building materials like cement, bricks, M.sand, blue metal for attending day to day maintenance work and emergency work like patch concreting in road, brick work partition, manhole raising etc., in officers quarters area and inside area wherever required in southern division area including conveying and stacking the materials at store or wherever required including all labour, transport, fuel, etc., complete.a. Ordinary port land cement 43 grade (chettinad/coromandel/dalmia or equivalent) |
| 140 | 85b. M.sand |
| 141 | 85c. Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 142 | 85d. Stone Aggregate 20mm nominal size |
| 143 | 86.Supply of the following labour to attend the emergency, desilting work, etc., and attend day to day maintenance work in the officers quarters and inside area wherever required in southern division area including tools, transport, etc., complete. a.Mason class I |
| 144 | 86b. Plumber Class I / Fitter Class I |
| 145 | 86c. Carpenter class I |
| 146 | 86d. Coolie |
| 147 | 87. Supplying of CP bath fittings of first quality(Metro or equivalent) including testing etc., all as directed. a.Towel Rail (600 mm long) |
| 148 | 87b. Health faucet |
| 149 | 87c. C P Waste coupling 32mm dia |
| 150 | 87d. C.P pillar Cock 15mm |
| 151 | 87e. C.P Brass Bib Cock 15mm |
| 152 | 87f. C.P brass long body Bib Cock 15mm |
| 153 | 87g. C.P brass Angle valve 15mm |
| 154 | 87h. C.P two way Angle valve |
| 155 | 87i. Connecting hose 2 feet |
| 156 | 88.Supplying of sanitary fittings of first quality (Paryware or equivalent) including testing etc., all as directed. a.Flushing tank (White) 10 litre (full flush) capacity |
| 157 | 88b. EWC seat cover (white) |
| 158 | 88c.40mm dia PVC pipe (flexible/rigid) for using kitchen sink/wash basin |
| 159 | 88d. 40mm dia CP SS Kitchen sink waste coupling |
| 160 | 89.Supplying of heavy dutybrass/SS/Aluminium fittings for doors, windows, cupboard etc.,a. Chromium plated Brass mortice latch and lock 100x65mm with 6 levers and a pair of brass lever handles |
| 161 | 89b. Brass cupboard lock 6 levers of approved quality, 40mm size |
| 162 | 89c. SBrass cupboard lock 6 levers of approved quality, 65mm size |
| 163 | 89d. Brass cupboard lock 6 levers of approved quality, 75mm size |
| 164 | 89e. Aluminium hanging floor door stopper with twin rubber & stopper |
| 165 | 89f. Stainless steel butt hinges 125x64x1.9mm |
| 166 | 89g. Stainless steel butt hinges 100x58x1.9mm |
| 167 | 89h. Anodised Aluminium tower bolt (barrel type) 150x10mm |
| 168 | 89i. Anodised Aluminium tower bolt (barrel type) 100x10mm |
| 169 | 89j. Anodised Aluminium handles 125mm with plate 175x32mm |
| 170 | 89k. Anodised Aluminium Aldrop 250mm long |
| 171 | 90. Supply of following paint items of approved quality and colour/shadea.Premium plastic acrylic emulsion of interior grade |
| 172 | 90b. Acrylic exterior paint |
| 173 | 90c. Synthetic enamel paint in all shades except black or chocolate shade |
| 174 | 91. Supplying of JCB machineries on hire basis for attending emergency works and as directed at site of work including operators, diesel, fright charges, fuel, etc., complete. |
| 175 | 92. Operating of vehicle mounted Heavy duty jetting cum suction machine including diesel with driver and operator for cleaning sewer lines including loading and disposing the waste fromChennai Port Authority Officers quarters area and wherever required as directed at site including all labour, tools, equipments, transport, fuel, etc., complete.Note:1. For handling/cleaning the machine, the cost of labour charges will be borne by the contractor. 2. The required water will be given in the near by site area at free of cost.3. The rate shall be inclusive of diesel, all tools and plants etc., complete.4. The contractor has not claim any charge for damaged parts.5. The unwanted materials like silt or any garbage to be dumped at open area as directed by the department.6. If any Break down or labour problem during working time deduction will be calculated proportionately based on the rate per day/per hour.7. Desilting and cleaning of septic tank, manholes, sewer lines etc. at Officers quarters at napier bridge, CISF Barracks and other places in EX(C)SD area by engaging vehicle mounted Suction cum jett rodding machine with necessary operator, labour, tools and fuel etc. |
| 176 | 93.Supplying diluting and injecting chemical emulsion for post constructional anti termite treatment with chlorpyrlphos Emulsifiable concentrate with 1% concentration (i.e. one litre of chemical for every 20 litires of emulsion) in officers\" quarters treatment (all floors) of soil along internal andexternal wall using chemical emulsion at 2.25 litire per linear metre inlcuding drilling and plugging holes etc. and treating the soil under floors, masonry/concrete inside and outside the officers\" quarters using chemical emulsion at 1 litre per hole at 30cm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 to the full depth of the hole and treating the points of contact of wood work by chemical emulsion (in oil of kerosene based solution) at 0.5 litres per hole by drilling 6mm dia at downward angle of 45 degree at 150mm c/c and sealing the same and as directed including all material (including cement) labour, tools, scaffolding, ladder, equipments etc. complete |
| 177 | 94.Removing the existing (defected/not closing properly) Aluminiumshutter frames inaluminium windows at Napier bridge quartersand whererver required altering the shutters by renewal of metal screws, handles, rubber beading for glass, locking and sliding arrangements, PVC wheels, etc., renewal of glass if necessary including fixing the shutters in the existing main frame to operating smoothely all as directed at site of work including all labour, tools materials like metal screws, handles, PVC wheel, equipments, transport, fuel, etc., complete. Note: Only glass payment may be made in the relevant item. |
| 178 | 95.Supplying of Foam board of various sizes for use of signage, identification and name boards in Napier bridge quartersand whererver required including all labour,material, tools,equipments, transport, etc. complete. |
| 179 | 96.Supplying and fixing of Micor fiber bath floor mat for GYM/Yoga Buildingor wherever required including all labour material, tools, equipments, transport, fuel, etc.complete. |
| 180 | 97.Supplying and fixing of cushion floor mat 18mm thick for in gymnasium Buildingor wherever required including all labour material, tools, equipments, transport, fuel, etc.complete. |
| 181 | 98.Providing and laying with good quality, Anti-skid flooring ceramic tiles made of (Jhonson/Kajaria/Nitco or other approved brands) of size 400x400mmapproved size ofandcolour match with existing set incement mortar 1:4 (1 cement : 4 crushed stone sand),20mm thick to a required finish with C:M 1:4 andto a proper slopes and alignment all as directed at site including cement, all labours, materials, tools, equipments, etc., complete. |
| 182 | 99.Providing and laying glazed wall dadoing/skirting (15cm height) tiles with good quality, made of (Jhonson/Kajaria/Nitco or other approved brands) mortif and decor of size 800x400mm approved size andcolour match with existing set incement mortar 1:3 (1 cement : 3 crushed stone sand),12mm thick to a required finish all as directed at site including cement, all labours, materials, tools, equipments, scaffolding, etc., complete. |
| 183 | 100.Providing and fixing good quality Single piece European type water closet (varmora brand or equivalent)with necessary \"P\" or \"S\" trap to suit site condition with matching seat cover fixing with teak wood plugs etc.,as per manufactures specification, all in good working condition andas directed at site of work includingall labour, materials, tools, equipments etc., complete. |
| 184 | 101.Providing and fixing New EWC hush seat cover (to suit the site condition) for approved make of colour white (slim line or equivalent) with necessary fixing with T.W. plugs, etc., all in sound working condition, as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 185 | 102.Supplying and fixing wash basin pillar cock (Jaquar brand - 29011 model) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., includingtesting the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 186 | 103.Supplying and fixing sink cock with swinging spout (Jaquar) fittings in kitchen and wherever required including fixing to water pipe lines, making water tight joint etc., includingtesting the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 187 | 104.Supplying and fixing wall mixer 3 in 1 (Jaquar brand 29273 model) fittings in bath rooms, toilets, etc, including fixing to water pipe lines, making water tight joint etc., includingtesting the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 188 | 105.Supplying the sanitary fittings(Jaquar) C.P hand shower in bath in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 189 | 106.Supplying the sanitary fittings (Jaquar) C.P shower arm 12\" long in bathin sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 190 | 107.Supplying the sanitary fittings(Jaquar) C.P brass shower rose in toilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 191 | 108.Supplying the sanitary fittings(Jaquar brand) C.P Bib cock 15mm fittings intoilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 192 | 109.Supplying and fixing ofC.P Two way Bib cock (Jaquar brands) in toilet, etc, including all materials, labour, screws, Plugs, tools, equipments, etc., complete. |
| 193 | 110.Supplying and fixing of CP brass health faucet (Jaquar brand - 573 model or equivalent) fittings in toilets, etc, including all materials, labour, screws, Plugs, tools, equipments, etc., complete |
| 194 | 111.Supplying the sanitary fittings (Jaquar brand) C.P angle valve in toilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 195 | 112.Supplying and fixing Shower basket (Jaquar brand) in bath rooms, toilets, etc, as directed including all materials, labour, tools, equipments, etc., complete. |
| 196 | 113.Supplying and fixing of CP towel rack (Jaquar brand) in toilet, etc, including all materials, labour, screws, Plugs, tools, equipments, etc., complete. |
| 197 | 114.Supplying the sanitary fittings (Jaquar brand) bottle trap in toilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 198 | 115.Supplying and fixing ofHand dryer (Jaquar smart flow model) in toilet in sound working condition all as per relevant specifications and as directed at site, including all materials, labour, screws, Plugs, tools, equipments, etc., complete. |
| 199 | 116.Supplying and fixing of Toilet paper holder (Jaquar brand) in toilet etc, including all materials, labour, screws, Plugs, tools, equipments, etc., complete. |
| 200 | 117.Supplying and fixing of Soap dispenser (Jaquar brand) in toilet etc, including all materials, labour, screws, Plugs, tools, equipments, etc., complete. |
| 201 | 118.Supplying and fixing WPC frames of size 45x70mm for toilet doors and wherever required of approved quality all as directed at site of work including all labours, materials, tools, equipments etc., complete. |
| 202 | 119.Supplying and fixing WPC shutters double side printed teak wood colour 30mm thick for toilet doors and wherever required of approved quality all as directed at site of work including all labours, materials, tools, equipments etc., complete. Note: Door fittings shall be paid seperately under relevant item. |
| 203 | 120a.Providing and fixing First quality UPVC Ball valveetc., to the water pipe lines in all floors in sound working condition by removing the existing wheel valve including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete.a. 25mm dia |
| 204 | 120b. 32mm dia |
| 205 | 121.Providing and fixing First quality Gun metal gate valve etc., to the water pipe lines in all floors in sound working condition by removing the existing wheel valve including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete.a.20mm dia |
| 206 | 121b. 25mm dia |
| 207 | 121c. 32mm dia |
| 208 | 121d. 40mm dia |
| 209 | 122.Providing and fixing New pipe line for EWC (IWC Convert in to EWC pipe line special requirement) by dismantling the old one without disturbing/damaging the adjusent pipesfixing with T.W. plugs, etc., all in sound working condition, as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 210 | 123.Supply of labour for maintaining rolling shutters/sliding doors by applying grease/oil and maitaining the slidinglock in the shutterall as directedby engineer incharge including labour, materials, tools, equipments, transport, fuel, etc., complete. |
| 211 | 124.Deep cleaning the existing wall tiles, floor tiles in bath room, kitchen including sanitary accesseries & CP taps by using harmless chemical solution and as per manufactures specification all as directed including all labour, tools, equipments, scaffolding etc. complete. |
| 212 | 125.Supplying and fixing of 2.5mm thickness of net 30mm square mesh gap garware polyster safety materials (Mesh code 55) (Color White/green) with the border rope of 2.5mm thickness and fixed with the 6mm strus steel hook drilled in the wall, the material has worth of proof U.V stablized and breaking strength 50kg peryarn melting point at outside building and as per manufactures specification all as directed including all labour, tools, equipments, scaffolding etc. complete. |
| 213 | 126.Supply and fixing of golden engraved brass name plates of size 450x150x3mm with letters of required size all as directedby engineer incharge including labour, materials, tools, equipments, transport, fuel, etc., complete. |
| 214 | 127.Supplying, fabricating and erecting the Structural steel work with required section includingweldingtheusing 3mm MS plateand welding necessaryarrangements including fixingto the pocketwithPCC 1:1.5:3(1 cement: 1.5 Crushed stone sand :3 stone graded aggregate of 20mm graded down to 12mm size) in volumetric proportions etc.,all as directed at site of work, scaffolding, fixing Joist in proper alignment, including one coat of Zinc rich primer, including cement. all materials, labour, welding, welding rods, tools, transport, fuel, etc., complete.Note:1. The payment is based on the weight of the MS section, MSbase plate etc., as fabricated.2. The weighment will made at site or any other place as approved by the site engineer. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 215 | 128.Providing and fixing Galvanised steel corrugated sheets 0.63mm thick with zinc coating not less than 275gm/m² for car shed roof of Officers quarters fixing in proper positionwith necessaryBolts, nuts, screws, etc andall accessories, to the existing box channel/L angle including joining the sheets to the required lap length and wherever required without damaging the nearby structures all as specified relevant specificationsand as directed at site of work includingproviding scaffolding, all labour, materials, tools, equipments,transport, fuel, safety helmets, safety belts, etc., complete.Note:Payment will be made only the actual area of sheet provided. |
| 216 | 129.Providing and fixing Galvanised steel powder coated colour ridge sheet 0.63mm thick adjustable ridge to suit the Galvalume roofing sheets with zinc coating not less than 275gm/m² as available in the Market for ridge portion and fixing in position with necessary screws to existing \"C\" channel/\"L\" angle/Galvalume roofing sheet including joining the ridges to the required lap length and wherever required without damaging the nearby structures all as specified andas directed at site of work, includingall labour, materials, tools, equipments, transport, fuel, etc., complete.Note: Payment will be made only the actual area of ridge provided. |
| 217 | 130.Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 218 | 131.Supplying and laying Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), light shade pigment using white cement all as directed at site of work inclulding all labour, tools, tackles, equipments, fuel, transport, etc. complete. |
| 219 | 132.Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, etc., complete all as per direction of Engineer-in-Charge. |
| 220 | 133.Preparing the surfaces of existing Chequerred precast cement tiles and applying two coats of floor paint(asian or euivalent) over the one coat of primer of approved colour all as per manufacturer\"s specifications and as directed at site of work including all labour, materials, tools, equipments, brushes, scaffolding, etc., complete. |
| 221 | 134.Supplying and fixing chik Thatties made up Bamboo with rolling accessries etc., at HD quarters and wherever required with necessary rope typing including all materials, labour, tools, equipments, transport etc., complete |
| 222 | 135a.Hire charges for Tractor with trailor for shift basis (8 hours) for conveying unwanted materials steel/wooden/Rubber materials/leavesetc to RSO yard/dumping yard with Labour Engaged for lifting the scraps etc., loading and unloading the materials, all as directed at site of work inclulding all labour, tools, tackles, equipments, fuel, transport, etc. complete.Note: The required labour will be supplied by the delegant under relevant item.a.Tractor with trailor |
| 223 | 135b. Deployed Khalasi Labour (3Nos/shift and engaged 10 shifts) |
| 224 | 136a.Providing, fixing and laying in position rigid unplasticised PVC pipes for sewage and waste water line on the walls (Finolex or Truebore or Varun or equivalent) capable of withstanding a pressure of 6Kgf/Sq.cm with all specials along the walls all as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. a. 75mm dia |
| 225 | 136b.110mm dia |
| 226 | 137.Supplying and fixing 18mm granite slab for cupboard slab and wherever required with Mirror polished granite of colour black, cherry/ruby red 18 mm thick including wall cutting using machine/manual cuttingwith required depth and length as directed including packing and finishing all asdirected including all labour, materials, transport, tools, equipments, fuel, etc., complete. |
| 227 | 138.Supplying of labour (one number/month) for removing unwanted growth of vegetation in the buildings from ground floor to parapet wall levelall asdirected including all labour, transport, tools, equipments, fuel, etc., complete.Note: Scaffolding charges will be paid in relevant item |
| 228 | 139.Loading, Transporting,dumping and levelling the surplus earth/debris/Quarying and transporting sea sand from the site tothe low lying area in theport premiseswith in a lead of 3Kms from the Port premises all as per relevant specifications and as directed including levelling at dumping site, all labour, transport, tools, equipment, fuel,etc., complete.Note:1) The contractor shall maintain tripsheets in triplicate in approved format at his own cost for the quantity of debris/earth transported.2) No interim paymentwill be made. A deduction of20% will be made on lorry cubicalcontent for earth transportation and No deduction of voids for debris will be made.3) However, the final quantityof Debriswill be restricted toactual quantity of demolishing item. a.Earth |
| 229 | 139b. Debris |
| 230 | 139c.Quarying and transporting sea sand |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
