|
| 1 | B/R PORTIONSurface dressing not exc 15 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, and getting out inany type of soil as infoundation of footing & like complete all as specified and as directed. |
| 3 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation complete all as specified and directed. |
| 4 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 5 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 40mm and dressing face beds and joints as specified to randomrubble wallingbrought upto courses complete all as specified and directed. |
| 6 | M&L for keyed pointing to randomor polygonal rubble uncoursed or brought upto courses in cement mortar1:4. complete all as specified and directed . |
| 7 | Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and directed. |
| 8 | Removing of surplus excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed. |
| 9 | Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed. |
| 10 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 with necessry angle, cleats and girder plate, channelsas in roof, wall frame, floor frame, stair case etc complete all as specified and directed. |
| 11 | M&L for4 inches thick walling with gypsum board 13 mm thick,rockwool 75 mm thick (between the wall), vapour barrier (between the wall) complete all as per manufacturers instructions and as directed. |
| 12 | M&L for6.2 inchesceiling with gypsum board 13 mm interior with PoP, rockwool 100mm thick (between the gypsum and GI/Glasroc), vapour barrier (between the gypsum and GI / Glasroc), corrugated GI sheet or glasroc-17 mm Exterior steel profiles complete all as per manufacturers instructions and as directed.. |
| 13 | M&L formetal roofwith GI 2 mm sheet in top portion, gypsum board12/13 mm, rockwool 100 mm thick (between the gypsum and GI/Glasroc), MPN 200 infill and hardrock 80, vapour barrier (between the gypsum and GI/ Glasroc), corrugated GI sheet or glasroc-17 mm with fire/moisture/ water resistant roof with painting complete as permanufacturing instructions and as directed. |
| 14 | M&L for4 mm thick interior Stone polymer composite interlocking tile flooring including Bison board 20 mm thick (between the SPC & Exterior), Rockwool 100 mm thick, vapour barrier (between the gypsum and GI/Glasroc), corrugated GI sheet or glasroc-17 mm exterior steel profiles with thermal, impact, slip and abrasion resistant with UV surface treatment complete all as per manufacturer\"s instructations and as directed. |
| 15 | S&F factory made uPVC white colourfixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of UPVC multi-chambered frame and reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of plastic caps and necessary stainless steel screws etc.mullion (where ever required) extruded profiles dulyprofile), UPVC extruded glazing beads of appropriate required length (shape & size according to UPVC dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, welded including drilling of holes for fixing profiles minus 5% tolerance in dimension i.e. in over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Note: For UPVC frame, sash and mullion extruded depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall accepted but no extra payment on this account shall be made complete all as specified and directed . |
| 16 | S&F factory made UPVC white colour Two track two panels sliding glazed door/ window made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Areaof door above 2.00 sqm upto 5.00 sqm) comprising of UPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension PER SQUARE METRE S & F Material only6897.14 5822.02SECTION 8 171 SECTION 8–JOINERY[k.M 8& c |
| 17 | Supply and fixing steel door vision including 6 mm th glass ss handles / door closureas specifiedwith locking arrangements complete all as specified and directed. |
| 18 | S&F Engineered composite door with frame water, fire repellent, fire resistant complete all as specified and directed. |
| 19 | S&F inPVC (SWR) floor trap, dia of outlet 100 mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 20 | S&F stainless steel grating doom 125mm dia complete all as specified & directed. |
| 21 | S&F Chromium Plated Toilet Roll Paper Holder with stainless steel flap complete all as specified and directed. |
| 22 | S&F Chromium Plated Towel bar600mm long complete all as specified and directed. |
| 23 | S&F Chromium Plated soap dish holder complete all as specified and directed. |
| 24 | S&F Chromium Plated soap dispenser with glass bottle complete all as specified and directed. |
| 25 | S & FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. |
| 26 | S&F Chromium Plated Towel shelf 600 mm long complete all as specified and directed. |
| 27 | S&F Chromium Plated Toothbrush Holder with stainless steel flap complete all as specified and directed. |
| 28 | S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and directed. |
| 29 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed. |
| 30 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 31 | S&F for 20mm dia CPVC pipes SDR 11 including all BrassCPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed. |
| 32 | S&F for 15/16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 16mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed. |
| 33 | M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubingand making good complete all as specified and directed. |
| 34 | S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted in position including ball brass valve 20mm doa high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store complete all as specified and directed. |
| 35 | S & F vitreous china tank less wall hung single piece EWC blind installation, rimless bowl design UF slim soft seat cover dual flush -3/6 LPF, antigerm glaze with hinges, fixing acessories set, cistern fitting size 355x525x380xmm P trap 300 mm complete all as specified and directed. |
| 36 | S&F Vitreous china Urinal, full stall type, white withwaste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed. |
| 37 | S & F verve with cascade waterfall/rain shower panel and 4 body jets ( mono shower panel) stainless steel structure,3 adjustable verticle jets(shower) ,movable ABS top shower, ,thermoplastic mixer with diverter,hand shower with flexible nose,butten spout, and min water pressure required 2 bar all as per manufactures specifications and complete all as specified and directed. |
| 38 | S&F Chromium Plated Push type, auto closing concealed Urinal Flush valve with wall flange complete all as specified and directed. |
| 39 | M&L for 10 to 12mm thick frostedtoughened glass for bathroom shower cubiclesfixed to aluminiumchannels, rails includingall necessary fixing arrangementswith cleats, hinges, brackets, SS Handles for door as directed by Engr-in-Chargecomplete all as specified and directed. |
| 40 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm bore complete all as specified and directed. |
| 41 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed. |
| 42 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore complete all as specified and directed. |
| 43 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed. |
| 44 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed. |
| 45 | S&F PVC (SWR) bends any radius 110 mm bore with access door complete all as specified and directed. |
| 46 | S&F PVC (SWR) bends any radius 75 mm bore with acsses door complete all as specified and directed. |
| 47 | S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed. |
| 48 | S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed. |
| 49 | S&F factory made 50mm thick 900 x 600mm manhole cover type KKMD with additional frame for fixing, finished the surface even and fair including reinforcement as per manufacturer\"s design and set in CM 1:4 and handles including demolition of old existing RCC cover (Reinforcement required to cut as facilitate to domolition) of any description and in any position complete all as specified and directed. |
| 50 | M&L fortwo coats of oil bound distemper over a coat of approved primer on new surfaces of ceiling complete all as specified and directed. |
| 51 | M&L fortwo coats of oil bound distemper over a coat of approved primer on New surfaces of wall complete all as specified and as directed. |
| 52 | M&L forapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/new surfaces of wall including necessary scaffolding required for painting work, safety measures etc. complete all as specified and as directed. |
| 53 | Supply and fix in repair for aluminium powder coatedpartition using standard aluminium SP/ DP section with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. (Sections : SP (Single partition)- 20033, DP (Double partition)- 20034, Glazing clips-4407) |
| 54 | S & F for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. (Sections : Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604). |
| 55 | M & L for granite stone 16 to 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 56 | S&F of white water proofing gypsum moisture resistanceboards rectangular for false ceiling10 mm thickness moisture resistance < 5% total water absorption , acoustic waterproofingsuspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidityin module sizeof 600x 600x10 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer\"s instructions complete all as specified and directed. |
| 57 | Dismantling wall /ceiling board (fiber, pulp, insulation, etc.incl all fitting) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 58 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointed in any mortar acomplete all as specified and directed. |
| 59 | M & L for double charged vitrified Ceramic, dark shade, colour tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bedor bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed. |
| 60 | S&F wall panelling on existing wall surface consisting 12 mm thick prelaminated waterproof MDF boardsplain colour MDFinclusiveprelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workof solvent cement and fixing at site on MDFframe as per specification and drawing to be fixed on wall The edge and periphery finally to be covered by extruded MDF corner angles, brass strips use as beading/fillet in panelling complete all as specified and as directed by Engr-in-Charge. |
| 61 | M & L second class soft wood in scantling clean swan complete all as specified and directed. |
| 62 | Taking down chowkats or frames with shutters (without taking off shutters from frame)area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed. |
| 63 | Taking down chowkats or frames with shutters (without taking off shutters from frame)area not exc.1.5 sqm each complete all as specified and directed. |
| 64 | Supply and fix for 30mm thick flush shutters with solid core construction, and laminated decorative surface both sides with lacquer coating of colour texture block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters, bult hinges, handle as per suitability complete all as specified and as directed. |
| 65 | S & F for pressed steel framesof size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0, ( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames completeall as specified and as directed . |
| 66 | S & F for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed. |
| 67 | S & F for 300 mm long aluminium anodised, barrel tower bolts of extruded section,complete all as specified and as directed. |
| 68 | Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mmcomplete all as specified and directed. |
| 69 | Supply and fixfor aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 70 | E/M PORTIONTaking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all complete all as specified and directed. |
| 71 | Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed. |
| 72 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed. |
| 73 | M&L Point wiring complete with 1.5 sqmm single core PVC insulated andunsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn throughheavy duty PVC conduit concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxesincluding Modular box, modular cover plates with frame mounting for housing the switches, socket outlets etc, complete all as specified and directed :-(a) One light point/fanpoint controlled by one way switch. |
| 74 | (b) One 3 pin switch socket outlet point 5 to 6 Amps on independent board. |
| 75 | (c) One 3 pin switch socket outlet point 5 to 6 Amps on same board with other switch. |
| 76 | (d) All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 3 core X 4 sqmm size. |
| 77 | S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 78 | S & Fix modular switch1 way 16A, 1 module complete all as specified and directed. |
| 79 | S & Fixmodular socketout let 6A 2/3 on combined 2 module complete all as specified and directed. |
| 80 | S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed. |
| 81 | S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed. |
| 82 | S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. |
| 83 | S & FixLED tube light rod 18 wattswith necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. |
| 84 | S & FixLED tube light rod 10 wattswith necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. |
| 85 | Supply and fix exhaust fan made ofsturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep250mm including complete with all as specified and directed by Engr-in-Charge. |
| 86 | Supply and fixing wall mounted fan 400mm sweepcomplete with connected accessories complete all as specified and directed by Engr-in-charge. |
| 87 | S & Fix of MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB\"s 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e complete all as specified and directed. |
| 88 | S & Fix of MCCB Four pole, 415 volts,63 Ampere, rupturing capacity 25 KA,complete all as specified and directed. |
| 89 | S & Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with suitable capacityamps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified and directed. |
| 90 | S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 91 | S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 92 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSPVC insulatedcopper conductor single core cable , multistranded Cutting chases, pinning in. making good to facings Concealedand including suitable size ofConcealed conduit with itsall accessories all as specified and directed by Engr-in -charge for the following: -(a) 2x6 sq mm and 1x6 sq mm as earth wire. Note : 2 Runs of 6 Sqmm cable, 1run of 6 Sqmm wire & PVC conduit shall be measured and paid as one unit. |
| 93 | (b) 2x1.5 sq mm and 1x1.5 sq mm as earth wire.Note : 2 Runs of 1.5 Sqmm cable, 1run of 1.5 Sqmm wire & PVC conduit shall be measured and paid as one unit. |
| 94 | M & L forearthing complete with deep galvanised earth plate600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep bellow ground level with top edge of plate) not less than 1.5 m bellow normal ground level connected to galvanised earth led strip 25x 4 mm by means of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified or indicated including testing on completion .Note -Rate are including of excavation, PCC Pit, PCC/CI cover, fune, watering pipe, test point and earth strip upto 7.5m length complete. |
| 95 | S& F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps capacity complete all as specified and directed. |
| 96 | Supply and fix LED street light 30 W IP 65 including iron angle complete all as specified and directed. |
| 97 | Supply and laying tubes, Galvanised,\"medium \" grade, with all fittings and fixed to walls, ceiling or laying in floors, all as specified for following size:-(a) 25 mm bore pipe |
| 98 | (b) 20 mm bore pipe. |
| 99 | (c) 15 mm bore pipe. |
| 100 | Supply and fixing ofGun metal gate valveswith iron wheel head,screwed both ends for iron pipes complete, size of GM gate valve 25mm complete all as specified and directed. |
| 101 | All as per item here in above but size of GM gate valve 15mm complete all as specified and directed. |
| 102 | S&F socket2-in-15 pin 6 Amps Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and directed. |
| 103 | S & Fix2 x 2 Ultra modern recess mounting36 watts luminaire with high performance LEDs, suitable for mounting with Grid ceiling including suitable size of MS iron frame & suitable size of clamps as per site requirement all as specified and directed by Engr-in-charge. |
| 104 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 105 | S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with bus bars with front openable cover single pole and neutral 8 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed . |
| 106 | S & F Submain wiring of size 2x4.0 sq. mm + 1x4.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.Note : 2 Runs of 4 Sqmm cable, 1run of 4 Sqmm wire & PVC conduit shall be measured and paid as one unit. |
