|
| 1 | Civil part |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :Of sectional area 40 sqcm. and above. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter fromcutting edge |
| 6 | Providing and layingsoiling tighly hand packed I/C carriage and headload charges complete |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth incl. all work upto floor-V Level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 13 | Carriage of material by MT for an average lead 45Km Bricks |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 17 | Fabrication/making of CNC lattice/foyer unit made up of 19 mm thick ply to ply board with flushed shutters finished in dark walnut textured enamel paint complete job and design to be approved by EIC |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | PROVIDING AND LAYING CERAMIC GLAZED FLOOR TILES 1200X600 MM (THICKNESS TO BE SPECIFIED BY THE MANUFACTURERS) OF 1ST QUALITY CONFORMING TO IS: 15622 OF APPROVED MAKE, LAID ON 20 MM THICK BED OF CEMENT MORTAR 1: 4 ( 1 CEMENT : 4 COARSE SAND) INCLUDING POINTING THE JOINTS WITH WHITE CEMENT AND MATCHING PIGMENT ETC., COMPLETE. 1200x600 mm size |
| 20 | Providing and fixing concealed wall mounted rimless water closet including all necessary fittings and fixtures complete job as per directions of EIC |
| 21 | Providing and fixing of Vive Geo Top wash basin for bathroom in hidden drain, fully glazed vessel sink for bathroom, 550x400mm, white glossy finish including marble of required size for installation complete sample to be approved by EIC |
| 22 | Providing and fixing toilet paper holder C.P. brass |
| 23 | roviding and fixing 15 mm dia CP brass angle valve with CP wall flangecomplete including cutting and making good the walls whereever required of approved make and brand as per directions of EIC |
| 24 | Providing and fixing CP Brass NOn telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia including cutting and making good the walls |
| 25 | Providing and fixing CP single level mixerof quality & make as approved by Engineer in charge. (a) 15 mm nominal dia including cutting and making good the walls |
| 26 | Providing and fixing CP shower including CP flangeof quality & make as approved by Engineer in charge.including cutting and making good the walls |
| 27 | Providing and fixing 600x20mm CP tower rail with CP brackets fixed to wooden cloats with CP screws etc of quality & make as approved by Engineer in charge.including cutting and making good the walls |
| 28 | Providing and fixing CP soap dish/tray including screws of quality & make as approved by Engineer in charge. |
| 29 | Providing and fixing CP Bib Cock including wall flnage of quality & make as approved by Engineer in charge. |
| 30 | providing and fixing of health faucet with shower of approved make incl.flexible connection pipe 1.2mt longwith all necessary fittings complete. |
| 31 | Providing and fixing of 15mm PVC connection 600 mm to 900 mm long complete |
| 32 | Solid, Waste,vent and Rain water pipesProviding and fixing PVC B Type soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. completeA75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B |
| 33 | B)110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B |
| 34 | P/F in position100 mm PVC floor trap of standard quality and make including cuttting and making good the walls |
| 35 | P/F in position100 mm PVC P or S traps f standard quality and make including cuttting and making good the walls |
| 36 | Providing and fixing CP/ SS grating with anti Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge. (Size 100 mm dia) (ISI Marked)\" |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. ternal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good thewall etc.A) PN-16 pipe , 25mm OD(SDR-7.4) |
| 38 | B)PN-16 pipe , 32mm OD(SDR-7.4) |
| 39 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 40 | CONSTRUCTING BRICK MASONARY MANHOLE WITH 75 CLASS DESIGNATION BRICKS IN CEMENT MORTOR 1:4 ( 1 CEMENT :4 COARSE SAND ) WITH 200MM THICK FOUNDATION CONCRETE 1:4:8 MIX ( 1 CEMENT :4 COARSE SAND : 8 GRADED STONE AGGREGATE 40MM NOMINAL SIZE ) INSIDE PLASTERING 12MM THICK WITH CEMENT MORTOR 1:3 ( 1 CEMENT :3 COARSE SAND ) FINISHED WITH FLOATING COAT OF NEAT CEMENT AND MAKING CHANNELS IN CEMENT CONCRETE 1:2:4 ( 1 CEMENT : 2 COARSE SAND : 4 GRADED STONE AGGREGATE 20MM NOMINAL SIZE ) FINISHED WITH A FLOATING COAT OF NEAT CEMENT COMPLETE AS PER STANDARD DESIGN , A)INSIDE SIZE 60 X 60 CM AND 45CM DEEP including SFRC cover |
| 41 | B)INSIDE SIZE 45 X 45 CM AND 45CM DEEP including SFRC cover |
| 42 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 43 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood 35mm |
| 44 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood 35mm |
| 45 | Providing and fixing of FRP plain sheets of approved shade for washroom doors as per site including screws complete |
| 46 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood |
| 47 | Providing 5mm thick vision panel of plain glass for glazing shutters (only panel area to be measured) including cost of teak wood beadings of eequired size complete |
| 48 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 100x10 mm |
| 49 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10 mm |
| 50 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm |
| 51 | Providing and fixing bright finished brass handles with screws etc. complete :150 mm |
| 52 | Providing and fixing of 300 mm long MS L Drop with Lock |
| 53 | Hook 125 mm |
| 54 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 55 | Applying priming coat: With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 57 | Providing and fixing 12 mm thickpanelling over 10mm thick framework of plywood inlcuding framwork of budloo wood all fittings fastenings including providing and applying PU wood polish over prepared surface after sandpapering , applying sealer etc complete job: First class imported wood |
| 58 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 15 mm thick Second class deodar wood |
| 59 | Engagement of skilled labor for removal, refinishing and refixing of existing wood flooring as per directions of EIC |
| 60 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ImportedKD wood |
| 61 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including cost of 10mm plywoodexcluding the cost of frame work which is to be paid separately. Paanch Murabah |
| 62 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 63 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 64 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 65 | Proding and fixing of0.5 mm thickCGI sheets of approvedprofile as approved by Engineer-in-Charge in including carriage of same upto site of workcomplete. The sheet should have protective guard film of 25 micronsminimum to avoid scratches while transportation.The sheet shall be fixed using self drilling/ self tapping screws of size(5.5 x 55mm) with EPDM sealof same color matching the shade of the sheets |
| 66 | Providing and fixing plained eaves boarding. 300x40 mm (nominal size) |
| 67 | Paintingwith synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats |
| 68 | Carriage of material by MT for an average lead 45Km sand and stone aggregate |
| 69 | Electric part |
| 70 | Wiring forlighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLSPVC insulated flexible stranded copper conductor wiresin recessed or surface medium class PVC conduit, with 240V6A modular switch , modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLSPVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) excl. cost of conduit. |
| 71 | Wiring forlight/power plug points (15/16A heating points) with 2x4 sq mm FRLSPVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLSPVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent)excl. cost of conduit |
| 72 | Supply and fixing of GI/ metal box along with modular base and cover plate for modular switches/ sockets in recess, etc. as required.i.04 module |
| 73 | II. 06 Module |
| 74 | Supplying and fixing of modularsockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider/Legrand or equivalent) i.3 pin 5A - 10A socket. |
| 75 | ii. indicator |
| 76 | iii.6 pin 15/16A socket. |
| 77 | iv. 15/16A switch. |
| 78 | v. 5A - 10A switch. |
| 79 | vi. 6A/ 16A3-pin top |
| 80 | Supply, installation, testing and commissioning of 15 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). (commercial type |
| 81 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of approved make and brand as per directions of EIC |
| 82 | Supply, installation, testing and commissioning of metal clad industrial socket outlet with 32A DP MCB and 3 pin top |
| 83 | Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/ Anchor). |
| 84 | Supply and fixing of 25 mm PVC conduits complete jon |
