Tender For Vvip Guest House, Mahatma Gandhi Marg (Saket) Civil Maintenance Work. - Providing And Fixing 25 Mm Diachlorinated Polyvinyl Chloride (Cpvp )Pipes , Having Thermal Stability For Hot & Cold Water Supply Including The Supply With Clamps At 1.00M S, lucknow-Uttar Pradesh

Tender For Vvip Guest House, Mahatma Gandhi Marg (Saket) Civil Maintenance Work. - Providing and fixing 25 mm diachlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.3) 2 Providing and fixing 15 mm g.i pipe complete with g.i fiting and clamp including cutting and making good the walls etcenternal work-exposed on wall 15mm dia nominal bore (DAR-18.10.1) 3 Providing and fixing 20 mm g.i pipe complete with g.i fiting and clamp including cutting and making good the walls etc enternal work-exposed on wall 20mm dia nominal bore (dar-18.10.2) 4 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152 mm long, weighing not less than 440 gms DSR NO-18.62.3 5 Providing and fixing15mm diaball valve(brass) of approved quality,high or low pressure , with plastic floats complete(dar-18.18.1) 6 Providing and fixing c.p brass shower rose with 15 or mm inlet :100 mm dia meter (dar-18.22.1) 7 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete -15 mm nominal bore(18.46.1) 8 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete -20 mm nominal bore(18.46.2) 9 Providing and fixing c.p brass angle valve for basin mixer and geyser point of approved quality conforming to IS:8931 15 mm nominal bore (dar-18.53.1) 10 Providing and fixing PTMT Ball cock of approved quality , colour and making complete with epoxy aluminium rod with L.P/ H.P.H.D plastic ball :15 mm nominal bore , 105 mm long weighingnot less than 138gms(dar-18.62.1) 11 Providing and fixing 8 mm dia c.p / ss jet with flaxible tube upto 1 meter long s.s triangular plate to European type w.c of quality and make as approved by engineer in charge (DAR-17.16A) 12 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting offittingsandbrackets,cuttingandmakinggoodthewallswherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DAR No- 17.7A 13 Providingandfixingwhitevitreouschinapedestaltypewatercloset (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushingcistern,includingflushpipe,withmanuallycontrolleddevice (handlelever),conformingtoIS:7231,withallfittingsandfixtures complete, including cutting and making good the walls and floors wherever requiredWC pan with ISI marked whit solid polastic seat and lid (DAR NO-17.2.1) 14 Providing & fixing float glass panes :(5.00 mm thick glass panes ) dar - 9.7.2.2) 15 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :35 mm thick including isi marked stainless steel butt hinges with necessary (9.21.1) 16 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) 17 Providingandfixing600x120x5mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.DSR NO-17.33 18 Providing and placing on terrace (at all floor levels) polyethylence water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48 19 Providing and fixing 20mm diachlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge enternal work-exposed on wall(dar-18.7.2)

INR 680 /-

INR 15000.0 /-

INR 1.50 Lakhs /-